Construction of shelter top near main Gate of PHC Qammerwari Srinagar

Amount

Excavating holes more than 0.10 cum and upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposal of surplus excavated soil as directed within a lead of 50 m and lift upto 1.5 m in all kinds of soil.

Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) including all carriages and cost of material involved.

Providing and laying Reinforced cement concrete 1:1.5:3 (M-20) (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) in foundations, plinths, plinth beams, lintels, suspended floor, roofs, beams, landings, columns, pillars etc complete excluding cost of centering and shuttering , finishing and reinforcement including cost and carriages of all material involved upto site complete. All works upto floor V- level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. Including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for columns, pillars, piers, abutments etc.

Providing and fixing of 20 mm dia anchor bolts 600mm long including nuts, washers etc all complete

Structural steel work in built up tubular (round, square or rectangular hollow tubes), trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc complete Hot finished welded type tubes.

Providing and fixing of pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by EIC) 0.50 mm (+ 0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as directed by EIC. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Painting steel work with deluxe multi surface paint of required shade to give an even shade two or more coats applied @ 0.80 litre/ 10 Sqm of approved brand and manufacture (Silver colour shade) including all carriage and cost of material involved.

M/S PEER KHURSHID AHMAD

M/S MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS

SHOWKAT AHMAD SOFI

M/S BHAT CONSTRUCTIONS

MOHAMMAD ASHRAF RATHER

M/S GHULAM MOHAMMAD SHEIKH

MR. AJAZ REHMAN KANNA