PROVN OF WAITING SHED NEAR ASHOKA HALL IN HQ PUPSA AT MEERUT UNDER GE (SOUTH) MEERUT CANTT

Amount

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M&L for PCC 1:2:4 type B2, 50mm thick (using 40 mm graded stone aggregate) as in as in sub base of flooring complete all as specified.

M&L for 5mm thick stone polymer composite flooring made from blend of stone powder providing high stability and resilience including 2-3 mm thick nylon / foam seat incl a wear resistant surface layer a decorative layer mimicking wood and an isometric locking system for installation complete all as manufacturer specification and direction of Engineer-in-Charge.

Supply & fix non-skid coloured tiles superior quality 400mm x 400mm x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed in CM 1:4 and all as per manufacturer's instruction complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and screed bed 15 mm thick CM 1:3 complete all as specified and directed.

S&F 25mm thick Exterior WPC Fluted wall panelling thick complete all as manufacturer specification and direction of Engineer-in-Charge.

S&F 5mm thick hollow PVC panels for ceiling with EPS stuck to 0.60mm plain PVC sheet suitably placed including false ceiling grid made of GI with parameter of wall support channel size of 25 mm, inner centre frame support channel size 50mm and section for panel support channel size 75mm as per specification complete all as sepecified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty complete all as specified and directed

S & F 50mm thick puff insulated colour coated pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of both side any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges / eaves gutters, fixed with self tapping screws complete all as specified and directed.

S & F MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats, wall anchor fastner etc (including fixing independently vertical post) complete all as specified and directed.

M&L for preparation of new or previously untreated steel & iron surfaces of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over over a coat of red oxide primer complete all as specified and directed.

Material and labour for sub class 'B' brick work with of straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material & labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for two coats of exterior emulsion paint ( Apex or weather coat) over a coat of primer white or tinted on new surfaces of walls including prepration of surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L for powder coated aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick glass all fixed to frame complete as directed by Engr-in-charge.

M&L for powder coated aluminium door shutters without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading,screws suitable fittings such as, hinges, handles, including S&F 5 to 6 mm thick plain glass all and fixed to frame complete as directed by Engr-in-charge.

M&L for 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and incl hydraulic floor spring for door shutter and all necessary fittings as required complete as directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum, in soft soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified.

Material & labour for cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M&L for preacast M-30 grade RCC boundary wall panels (factory made) reinforced with high tensile strength, 50mm thick panels of height 300 mm each, jointing with interlocking mechanism and fixing complete as directed by Engr-in-charge.

M&L for preacast M-30 grade RCC column / post typically 'H' shape or rectangular section with dimensions like 150mm x 150mm (factory made) to provide structural reinforced with high tensile strength, 50mm thick panels of height 300 mm each, jointing with interlocking mechanism fixing at site complete as directed by Engr-in-charge.

M&L for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight n.exc 4 Kg per sqm, complete all as specified and directed.

Supply and plantation of ornamental and Exotic plants of alternanthera green of size 100mm to 150mm including PVC hanging type flower pot of size 125mmx125mmx125mm as directed by Engr-in -change.

Supply and plantation of ornamental and Exotic plants of alternanthera red of size 100mm to 150mm including PVC hanging type flower pot of size 125mmx125mmx125mm as directed by Engr-in -change.

Supply and plantation of ornamental and Exotic plants of Syngonium neon of size 100mm to 150mm including PVC hanging type flower pot of size 125mmx125mmx125mm as directed by Engr-in -change.

Supply and plantation of ornamental and Exotic plants of Syngonium pink of size 100mm to 150mm including PVC hanging type flower pot of size 125mmx125mmx125mm as directed by Engr-in -change.

Supply and plantation of ornamental and Exotic plants of Syngonium ordinary green of size 100mm to 150mm including PVC hanging type flower pot of size 125mmx125mmx125mm as directed by Engr-in -change.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed but one light point controlled by one, one way one module modular switch 05/ 06 Amps all as specified and directed.

All as per item No 30 here-in-before but one fan point/exhaust fan point controlled by one, one way one modular switch 05 / 06 Amps all as specified and directed..

All as per item No 30 here-in-before but one 3 pin, 05 / 06 Amps 2 module modular socket outlet point on independent board controlled by one, one way one module 05 / 06 Amps modular switch all as specified and directed..

All as per item No 30 here-in-before but one 3 pin, 05 / 06 Amps 2 module modular socket outlet point on same board controlled by one, one way one module 05 / 06 Amps modular switch all as specified and directed..

All as per serial item No 30 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board all as specified and directed..

Supply & fixing modular switch 1 way 06A 1 module 240 volts all as specified and directed..

Supply & fixing 2 module modular socket outlet 3 pin, 05 / 06 Amps 240 volts all as specified and directed..

Supply & fixing modular switch 15 / 16 Amps single pole, one way 240 volts AC complete all as specified and directed..

Supply & fixing of modular socket outlet 3 pin 6 / 16 Amps 2/3 pin combined 2 module all as specified and directed.

Supply and fixing decorative wall light fitting wall mounted type including LED lamp 9 Watt-01 No complete.

Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed by Engr-in-Charge.

Supply and fixing 6 watt LED spot light 4000K cool white colour temprature, 36 mm cutout and compact design ceiling light CRI Tech with high voltage protection down light complete all as specified and directed.

Supply and fixing Supply and fixing ceiling fans complete with blades, down rods, step type electronic regulator compatible for BLDC Fan upto 60 watt and ccessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC). all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed.

S&F (in repair) for sub main wiring with 6 Sqmm nominal cross sectional area, four single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of suitable size, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, B curve, 10 kA, complete all as specified and directed.

Supply & fixing MCB SPN, AC, 240 volts of 40 to 63 Amps, B curve, 10 kA, complete all as specified and directed.

Supply and fix ventil air hush exhaust fan complete with louvers shutter, voltage 230V, 50 Hz, RPM 2000 RPM,40 Watt Copper winding of sweep 150mm complete all as specified and directed.

Supply and fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/colour washing/distempering etc to match with existing disturbed surfaces complete all as directed by Engr-in-Charge.

Punit Jain (BID ID -3480806)