AAI/NATS/E-E/AMC_EI/2019-20/08

Amount

SH-1 : MANPOWER

1. Maintenance/operation of various Electrical & Mechanical installation including preventive and break down maintenance / repairs, attending complaints on all working days( 6 days in a week) i/c holidays etc. complete as required at NATS complex, IGI Airport with following manpower, as and when required.

(a) Electrician/Operator (Skilled)-02 No. in one shift + Electrical attendant (Unskilled) - 02 No. in one Shift.

SH-2 (Rewinding / Repair of Motors etc. )

1. Rewinding of Exhaust fans/ pedestal fan/wallmounted fan of following sizes with super enameled copper wire of suitable gauge & insulation grade i/c replacement of ball bearing, shaft etc. as reqd. Dismantling, transportation to workshop and back reinstallation, testing, commissioning, making connection, providing and fixing of necessary nut & bolts etc. (As & when required). (Old winding material will be retained by agency.)

2. Rewinding of ceiling fans of 1200/1400 mm with super enamelled copper wire of suitable gauge & insulation grade i/c replacement of ball bearing, shaft etc. as reqd. Dismantling, transportation to workshop & back and re-installation i/c connection, testing & commissioning (as & when required ). (Old winding material will be retained by agency).

3. Rewinding of different models and make 3 phase induction motors of centrifugal and monoblock pump/submersible pump motors of following capacities as & when required with copper conductor of suitable gauge and insulation grading i/c dismantling, transportation, from the site to workshop and back, re- installation etc. complete as required. (Old winding material will be retained by agency.)

A Monoblock Pump Motor

B Submersible Pump Motor

4. Repairing of 3-phase monoblock / submersible pump by replacement of defective bronze bushes,bearings, impeller, water seal, gasket, shaft, impeller etc. complete as required (As & when required) of capacity (Old dismantle material will retain by agency).

5(a) Labour charges on lifting of all existing size submersible pump motor set ( Bore well pump set ) from the existing bore of upto 250 feet deep as & when required along with pipe lines, cable , wire rope etc. and re-installation of the same after rectification of the defect (Spare parts charges of repairing for rectification of pump/motor will be paid separately).

5(b) Labour charges on lifting of all existing size submersible pump motor set from the existing sump of upto 25 feet deep as & when required along with pipe lines, cable etc. and re-installation of the same after rectification of the defect (Spare parts charges of repairing for rectification of pump/motor will be paid separately).

6. Dehydration and filteration of transformer oil at NATS Bldg. complete i/c hiring charges of filteration machine, labour, drums etc. complete with submission of oil testing for acidity report. (The quanty includes 2 Nos. dehydration for 2 Nos. transformers for the year 2018-19 and 2019-20)

7. Dismantaling and Removing of existing SFU of various capacities from the different existing panel and supply & fixing of following capacities MCCBs /MCBs for the existing panel i/c required modification, cutting, rubber gasket and fabrication required, work din rail to install new MCCB/MCB including end termination, interconnection and all associated works complete as & when required.

(a) MCCB, 100 Amp (10 KA), 4P.

(b) MCCB 125Amp (25KA), 4P.

8. Supply, Installation, Testing and Commissioning of Lead Acid VRLA Battery Bank of 110 V , 100 AH consisting of 55 cells of 2 V in factory charged condition each complete with lead coated intercell connector, Nut Bolts, MS Stand etc complete as reequired. (Make: Amar Raja or equivalent as per Approved Make with the prior approval of E-I-C) . NOTE : The contractor shall quote the rate for the above item by considering the discount for existing old batteries which shall be taken away by the contractor.

9. Painting of Street Light pole with suitable approved make paint two coat and numbering upto satisfaction of EIC

10. Repairing of earth pit with plaster as per direction o EIC.

11. Supply and fixing CI/MS cover plate for earth pit hinged with locking arrangement upto satisfaction of EIC.

SH-3 : - Supply Items

Supply of following electrical spares/items suitable for single phase 50 Hz A.C. supply complete as given below :

1. Lamps for Flourescent Tube Light for general lighting services.

(a) 36 Watt ( T 8 FTL)

(b) 28 Watt ( T 5 FTL)

(c) 14 watt T-5 HE 6500K

(d) 18W / 20 W (2 Feet).

2. CFL lamps of following ratings :

(a) 36 watt (FP-L-36 Watt), 4 Pins.

(b) 18 Watt CFL (2 Pins ).

(c) 11 Watt CFL, Retrofit type.

3. Supply of 18-20 watt LED T8 tube with minimum light 1650Lm with prior approval of EIC.

4. Supply of cordless call bell with remote with battery, bell to be put in light socket with accessories complete as reqd..

5. Supply of Electric Storage Water Heater (Gyser), 15 Ltr., 5 star rating, Model : Puro, (Make : Havells or equivalent with prior approval of Engineer-In-Charge).

6. Supply of 600 watt, air flow 3.3 m3/min blower suitable for 50 Hz, 220 V. Make-bosch or equivalent with approval of EIC

7. Supply of 2x36 w CFL recess mounted luminaries with powder coated CRCA housing with mirror optics louver and decorative sans and wings alongwith CFLs electronic ballast complete with all accessories required. (Philips FBS450/236M2 PW EBT 2xPL-L36W or equivalent as per EIC).

8. Supply of starter suitable for Fluorescent tube light/CFL of following ratings :

(a) Universal starter for 18 Watt, 110 V.

(b) Universal starter for 36 Watt., 230 V.

9. Supply of Electronic Ballast for following CFL / FTL fittings :

(a) 1x18 watt CFL

(b) High performance Electronic Ballast for 1 X 36/40 Watt FTL

(c) High performance Electronic Ballast for 2 X 36/40 Watt FTL( THD<33%)

10. Supply of PVC insulated, PVC round sheathed, unarmoured copper conductor flexible cable, 1.1 KV grade confirming to IS : 694 with upto date amendments as reqd.

(a) 3x1.5 sqmm Rate per Mtr

(b) 3x4 sqmm

(c) 3x6 sqmm

(d) 3x10 sqmm

(e) 4x6 sqmm

(f) 4x10 sqmm

11. Supply of single core copper conductor flexible PVC insulated industrial grade cable, 1.1 KV grade confirming to IS : 694 with upto date amendments as reqd.

(a) 0.75 sqmm (HR-FR)

(b) 1.5 sqmm (FR-LSH)

(c) 4 sqmm (FR-LSH)

(d) 10 sqmm (FR)

12. Supply of 150 watt Metal halide double ended quartz tube lamp, MH -6000K

13. Supply of 70 Watt HPSV-(SON-E) type elliptical lamp.

14. Supply of self adhesive PVC electrical insulation tape (ISI Marked).

15. Supply of distilled water suitable for charging of heavy duty batteries used for DG sets.

16. Supply of Power strip / extension board of 16 Amp. ratings, 3 Nos. socket and 3 No. switch indicating lamps, 3 pin moulded type plug top, 3 core PVC wire suitable for computer etc.

17. Supply of Old cotton dhoties suitable for cleaning of panels etc.

18. Supply of Socket & Switch combined, 10/20 Amp, with box, 2 hole.

19. Supply of 3 pin Plug top, of the following sizes :

(a) 6 Amps,

(b) 16 Amps

20. Supply of HRC fuse link of following ratings 80 KA breaking capacity 415 Volt suitable for existing panel switchgear. Make : L & T or equivalent

(a) 2 Amps round type

(b) 6 Amps offset

(c) 32 Amps (A1)

(d) 63 Amp (A1L)

(f) 250 Amp (slim knife type)

21. Supply of 2.25 MFD capacitor suitable for fan.

22. Supply of single phase Exhaust Fan/Ventilating Fan, Make : Havells or Equivalent of following sizes :

(a) 250 mm, Non-metalic type ventilating fan.

(b) 300 mm, 1400 rpm, heavy duty exhaust fan (Make - Havells, Model : Turbo force or equivalent with prior approval of E-I-C).

(c) 380 mm, 1400 rpm, heavy duty exhaust fan (Make - Havells, Model : Turbo force or equivalent with prior approval of E-I-C).

23. Supply of RCCB, 4 Pole suitable for 415V, 50Hz, 40 Amp Capacity, 300 mAmp

24. Supply of MCB, TP, 25 Amp, (Breaking Capacity 10KA, C Series).

25. Supply of MCB, TP 63 Amps (breaking capacity 10KA, C- serires).

26. Supply of following types MCB/MCCBs suitable for installation:

(a) MCB, 63 Amps, 4 Pole, (Breaking Capacity 10 KA, 'C' series), Make : Havells or Equivalent.

(b) MCB 100 Amps, , 4-pole , (Breaking Capacity 10 KA, 'C' series, high ratings).

27. Supply of MCCB, 4 Pole, 125 Amps (25 KA breaking capacity) suitable to existing switchgears.

28. Supply of MCCB, 4 Pole, 100 Amps (10 KA breaking capacity), Cat No : IHLGSF01000, Makes : Havells, or Equivalent suitable to existing switchgears.

29. Supply of LED Type Indicator for R,Y,B Phase, for Red, Blue, Yellow colour and green suitable for 240 Volt AC. as per sample, Make : L&T or equivalent.

(a) Red, Yellow and Green

(b) Blue

30. Supply of LED Type Indicator lamp complete with accerrories suitable for 110 DC Volt. Suitable for existing panel Make : L&T or equivalent.

31. Supplying of Direct On Line Starter for upto 7.5 HP, 415 V, 50 Hz, 3 Phase in sheet steel enclosure, etc. (Model : MK1, Make : L& T or Equivalent).

32. Supply of Direct On Line -Submersible pump Starter for 5/6 HP, 415 V, 50 Hz, 3 Phase in sheet steel enclosure alongwith ammeter, voltmeter and indicators etc. ( Make : L& T or Equivalent).

33. Supplying of Energy saving Fan suitable for single phase, 230V, 50 Hz of following types :

(a) Ceiling Fan 1200 mm, 3 blades, Model : SS-390-50, 5 Star rating Make : Havells or equivalent.

(b) Wall Mounted Fan, 400 mm Model : Swing HS (new), Make : Havells or equivalent.

34. Supply of LED based rechargeable Emergency Light suitable for single phase, 50 Hz, 5W alongwith 3.7 V, 4.4 Ah rechargeable battery, complete as reqd. (Model : LHEXTEP7HN1R005), Make : Havells or equivalent with approval of E-I-C.

35. Supply of LED torch 3 watt rechargeable , battery capacity 4V, 2000 mAh battery backup 5 Hrs approx. as approved by EIC.

36. Supply of following batteries (Note: The contractor shall quote the rate for the above item by considering the discount for existing old batteries which shall be taken away by the contractor).

(a) Heavy duty Batteries 12 V, 180 Ah 25 plates fully charged for replacement of existing batteries as & when required (Make Exide Express XP-1800 or equivalent with prior approval of E-I-C).

(b) 12V, 17 AH sealed rechargeable battery. Make - Exide

(c) 12 V, 7.2 AH Amaron make or equivalent

(d) 12 V, 65 AH Exide make

37. Supply of Insect killer 2x18/20 watt , Make : Avro Model: killer-1000 or equivalent with prior approval of Engineer-In-charge.

38. Supply of Submersible pumps set of 5HP/3.7 KW, 6 Stage 3 phase 415 Volts 50 Hz, Head 62 Mtr. max. etc. complete as required upto satisfaction of EIC.

39. Supply of following logbooks for maintaining data as in earlier practice :-

(a) Substation Log book (log size)-100 page

(b) DG set log book - 100 page

(c) Lift log book - 100 page

(d) Pump log book -100 page

(e) MAS Register - 400 page

(f) OTA Register - 400 p

40. Supply of Battery charger 24 V DC, 20 Amps CVCC suitable for 230 V AC, 50 Hz . Make-Mahamai ,MMAX POWER

41. Supply of following type DBs

(a) SPN 12 way DB with doubledoor, busbar, neutral links, earth bar, etc complete (metal body)

(b) TP&N, 4 way, Vertical DB double door type fitted with Bus Bars, Neutral links, earth bars etc complete suitable for MCCB as incomer as required.

42. Supply of following box, cover plates, casing & caping, switch &socket as and when required.

(a) 6A, One way switch (Piano type)

(b) 6A, 5 Pin Socket (Piano type)

(c) 20A, One way switch (Piano type)

(d) 20A, 6 Pin Socket with shutter (Piano type)

(e) 10A, One way switch (modular type)

(f) 10A, Uni D Socket with shutter(modular type)

(g) 20A, One way switch (modular type)

(h) 20A, 6 Pin socket with shutter (modular type)

(i) 6 Module base and cover plate

(j) 6 Module plastic box

(k) 25 X 16 mm casing & caping (ISI Marked)

43. Supply of 70 watt open construction HPSV/MH Ballast

44. Supplying of MCB, Single Pole, 'C' Series, 6-32 Amp, 10 KA.

45. Supply of Room Heater (Oil) three heat setting, 800/1200/2000 Watt, 9 Fins, adjustable thermostat with coster wheels cable and plugtop complete as required Make - Bajaj Majesty RH9 or equivalent with approval of E-I-C.

46. Supply of 200 Ltr. Non-metallic barrel suitable for transportation of diesel/oil with prior approval of EIC.

47. Supply of XLPE insulated and PVC sheathed , stranded Al. conductor, armoured cable of 1.1 KV grade, conforming to IS : 7098 (part-I) with upto date ammendment etc. as and when required

(a) 3x1/2x25 sqmm

(b) 3x1/2x50 sqmm

48. Supply of Handle assembly suitable for 125/250A SFUs

49. Supply of Handle assembly suitable for 32/63/100 A SFUs

50. Supply of Electrical kettle 1.2 ltr capacity. Make Philips or euivalent with prior approval of Engineer-in-charge.

51. Supply of following tools (Taparia):

(a) Adjustable spanner with soft grip, length 255mm, product no. 1172-S-10

(b) Double ended spanner set with contents 6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32. product no. DEP-12

(c) Ring spanner set with contents 6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32. product no. 1812

(d) Long nose plier insulated with thick CA sleeve Product no. 1430-6/1430-6N

(e) Heavy duty pipe wrench length 900mm,max opening 150mm, suitable for 5" pipe . Product no. HPW 36

(f) Heavy duty pipe wrench length 450mm,max opening 73mm, suitable for 2.5" pipe . Product no. HPW 18

(g) Combination Plier insulated with thick CA sleeve length 185 mm, Product no. 1621-7

52. Supply of industrial first Aid Kit Make : ST JOHNs First Aid Kits Pvt. Ltd. Or equivalent as per direction of EIC.

53. Supply of 50 W 12V Electronic Transformer suitable for Halogen Lamp Make : Phillips ETK 50

54. Supply of Pole mounted Junction Box for road/street lighting suitable for 3 phase and neutral based lighting system for industrial applications complete along with bus bar clamps,insulating pads, nut bolts, clip etc as required. Make : Sintex model noGS JB 2520 (250 X 200 X 150mm)

55. Supply of 3 phase mono block pump set (with motor) of capacity 5 HP, head 36-52m, size 50X40mm suitable for 300-404 volt, 50 HZ. Make : Kirloskar or equivalent as per direction of EIC.

56. Supply of heat convector with thermal fuse, cable and plugtop complete as required Make - Bajaj RX-8 or equivalent with approval of E-I-C.

57. Supply of wall mounted decorated luminaire suitable for 220 V 50 HZ complete with 18 watt CFL etc. as required. Make : Phillips - HWS360 IXPLC/P18 WGR or equivalent with approval of E-I-C.

58. Supply of 1x36 watt fixture with suitable tube light which works on 220V and 50Hz frequency.

59. Supply of 500 V megger

60. supply of 3 phase, 4 wire static watt hour (energy) meter. (Make - L&T make model no. EM301 or equivelent)

61. Supply of industrial type drill machine (Bosch make)

62. Supply of 750 Watt capacity (2700 RPM) , dosing pump for RO plant which is suitable for 220 V, 50 Hz power supply (Make - Kirlosker's model type CHHOTU STAR or equivelent)

63. Supply of SS Hand drier suitable for 240V,I-phase, 50 Hz A.C. supply complete with power cable and plug top etc complete as reqd.( Make : Kopal model 20 R or equivalent with prior approval of EIC).

64. Supply of halogen room heater. ( Make : Bajaj, Usha, V-Guard or equivalent with prior approval of EIC).

K C ELECTRICAL AND TRADING

S. N ELECTRICALS

SHIV ENTERPRISES

JAYRAM INDUSTRIES INDIA PRIVATE LIMITED

Manish Electricals

Sew Engineering Works Pvt Ltd

NATIONAL SAFETY ENGINEERS