Construction of New Boundriwall for Protection of Nanau Jiledari Second and Third and development the Premises

Amount

Cleaning thick bushes and throny jungle without uprooting jhunds i/c. back filling and dressing.

Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by Engineer-In-Charge

Earth work in excavation of i/c all lift and lead up to 150 m with back filling of wall i/c all cost of material, labour and T and P etc.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and laying P.C.C. (1:4:8) i/c all cost of material, labour and T and P etc. complete.

Ist Class Brick work 1:4 CM including all cost of material, labour and T and P etc.

Ist Class Brick work 1:6 CM including all cost of material, labour and T and P etc.

Providing and laying C.C. M-15 (1:2:4) i/c all cost of material, labour and T and P etc. complete.

Providing and laying Reinforcement Cement Concrete (RCC) work (1:1.5:3) i/c all cost of material, labour and T and P etc. complete.

Centering and shuttering for R.C.C./R.B. work including cost of centering & shuttering up to 3.0 m. height.

Providing and fixing steel Reinforcement for R.C.C. work i/c cost of steel, bending,binding and placing in position i/c all cost of material, labour and T and P etc. complete.

12 mm thick cement plaster in 1:4 cement coarse sand including cost of all material, labour and T and P etc. complete

Providing and fixing SS tower bolts, ISI marked, with necessary screws etc. complete: h) 150×10mm

Providing and fixing SS handles, ISI marked, with necessary screws etc. complete: o) 100mm

Providing and fixing I.S.I. marked SS door bolt (aldrop) with 16 mm dia rod & screw, 250 mm long. complete:

Providing and fixing Second class teak wood 35 mm thick glazed/wood pannal shutters for windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing wood work Salwood Chaukhat 150×75mm double rebate of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length including joint treated with fevicol properly nailed with one coat of primer, black japan paints on wall side complete. (Tolerance 3mm).

Mild steel and iron work of small size and section such as holding down bolts, hold faststierods, grating, etc. (When not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of holes in Choukhat, Railling,channal gate, Window Grill etc.

Providing and fixing Stainless steel curtain rod with two SS decorative brackets fixed with SS screws and PVC sleeves etc., wherever necessary complete. 25 mm dia

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board DP box. including drilling holes in cubicle panel, making connections, etc. as required.

Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all materials, Labours, T and P etc. complete required for proper completion of the work.

(a) Painting 1st coat over priming coat on steel and other materils surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sqm in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. :-Steel surface

Wood surface

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm nominal outer dia Pipes

(b) 20 mm nominal outer dia Pipes

(d) 32 mm nominal outer dia Pipes

Providing and fixing PVC pipe confirming to IS make working pressure 6 Kg./Cm2 incuding testing labour Tand P and all complete fittings i) 75 mm diameter

ii) 90 mm diameter

iii) 110 mm diameter

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.

P/F white glazed earthane ware 580 mm Orissa pan type WC pan with low level Cistern i/c all cost of fitting labour, material T and P etc. for proper completion of work.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: - - a) White Vitreous China Wash basin size 630×450 mm with a pair of 15 mm C. P. brass pillar taps.

Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing P.V.C. Water Storage Tank Sintex or Equivalent. Required 1000 L tank.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC: 67 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting, 2 mm thick supported on a SS steel section post 100 mm × 100 mm × 3 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement conc. 45 cm × 45 cm × 60 cm, 60 cm below ground Ievel as per approved drawing atteched.

Laying of I shaped precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50Kg.) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. Including VAT

Kota stone slabs 20 mm thick in floor, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Supplying and fixing Main Steel Gate of 4.00x2.00 (2x2.00X2.00 M) & Side Steel Gate of 1.50x2.00 (1x1.50X2.00 M) on Retangular hollow Section Pipe frame 122x61x3.2 mm Filling With 50x25x3.20 mm rectangular Pipe with one coat of red oxide primer & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.(all work Done as par Drawing/ direction of Engineer-in- charge) including cost of all material, Labour T and P etc .

S/F 1.5 H.P. Sammarsable pump ISI mark with jali,cable, stater etc. Complete.

Supplying & Installation of Solar Power Plant 3.0 KW-12V 150AH x 6 no. all accessories at site inculding all cost of material, labour and T and P etc.

CA CONSTRUCTION WORK AND ENGINEERING SERVICE

M/S S K BUILDERS

Rakesh kumar

priyakant

M/S SUBHASH GAUTAM

HARENDRA SINGH

KRISHNA KANTA

M/S ANIL KUMAR