SPECIAL REPAIR TO SERVANT QTR AT BLDG NO SM-151, SM-152 AND SM-153 AND PROVN OF GUARD ROOM NEAR BLDG NO B-154 UNDER GE (MCTE) MHOW

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 sqm and not exc 4 Sqm each complete all as specified

Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work complete all as specified

M&L for Fly ash Brickwork straight or curved on plan exc 6m mean radius built in Cement morter 1:6, complete all as specified

S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing complete all as specified

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge, Paneling of 2mm thick prelam PVC sheet on bothfaces i.e front face & back face with particle board core to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing. given SSR 2020 complete all as specified

S&F pressed steel door frames of size 125 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified

S&F Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete wiith glazing bars/ guard bars dovetailed or welded complete all as specified

S&F Steel window or ventilator fixed type/ top hung type with glazing bars/ guard bars complete wiith glazing bars dovetailed or welded complete all as specified

M&L for 4mm thick sheet glass ordinary quality in panes exec 0.5 sqm each fixed with & including rubber gasket in alu frame work/ putty complete all as specified

S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified

S&F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8.20 (a), complete all as specified

M&L for stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; complete all as specified

M&L for PCC 1:2:4 Type B0 (12.50mm graded aggregate) as in bed block for holdfast and filling door frame complete al as specified.

S&F 250mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S&F 100mm size of Butt hinges, medium weight cold rolled mild steel complete all as specified

S&F aluminium anodised barrel tower bolts of extruded section with 100mm long bolt, complete all as specified

S&F aluminium anodised barrel tower bolts of extruded section with 200mm long bolt, complete all as specified

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified

S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified

M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified.

M&L for preparation of new steel or iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish, complete all as specified

S&F repair stainless steel curtain rod with brackets 25mm dia including necesary SS clamp complete all as specified

Demolition of cement concrete (including floor tiles, kota stone flooring etc) (un-reinforced) of any description and in any position not otherwise specifically provided for incl remoal the demolised materials to a distance exc 50 mtr and not exc 100 mtr complete all as specified

M & L for 75mm thick cement concrete 1:3:6, type C1, with using 20mm graded stone aggregate in floor/ plinth protection, finish the surface even and smooth without using extra cement complete all as specified.

M&L for forming construction dummy joints 65mm deep x 10mm wide fillied with Grade B sealing compound complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles, complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified.

All as per item No.31 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified

M&L for Glazed Coloured ceramic tiles (textured and designed as required) in vertical surfaces size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat in CM 1:3 complete all as specified

M&L for granite slabs 20mm thick machine cut bedded laid over cement screed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl grinding moulding rounding chamfering and polishing complete all as specified

Rounding to edges of stone slab slab one edge such as in steps, cooking platform, and other similar situation complete all as specified

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, complete all as specified

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified

S&F angular stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

Taking down old GI tubing ISI marked medium grade 15mm bore with all fittings including connection etc, complete all as specified

Taking down old GI tubing ISI marked medium grade 20mm bore with all fittings including connection etc, complete all as specified

Taking down old GI tubing ISI marked medium grade 25mm bore with all fittings including connection etc, complete all as specified

M&L for GI tubing ISI marked medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified.

M&L for GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified.

M&L for GI tubing ISI marked medium grade 25mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified.

Cutting chases for concealed water tubing in brick wall and making good in CM 1:3 cutting n.exc 10cm girth. complete all as specified

S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 500Ltrs incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float including removing the existing one complete all as specified

S&F SS Sinks with drainage board in repair made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and including waste pipe complete all as specified

M&L for steel plate rack of size 900 x 750 x 250 made up of 1mm thick steel complete all as specified

S & F in repairs PVC (SWR) Floor trap/ Nahani trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified

S & F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls complete all as specified

S & F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to floors or in trench complete all as specified

S & F in repair 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified

S & F in repair 110mm bore PVC (SWR) vent cowl complete all as specified

S & F in repair 75mm bore PVC (SWR) vent cowl complete all as specified

S & F in repair 110mm bore PVC (SWR) bend any radius complete all as specified

S & F in repair 110mm bore PVC (SWR) bend with acess door complete all as specified

S & F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified

S & F in repair 75mm bore PVC (SWR) bend any radius complete all as specified

S & F in repair 75mm bore PVC (SWR) bend with acess door complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified

Dismantling of cast iron/ PVC pipes jointed in cement mortar 110/ 75mm bore complete all as specified

S&F 75mm PVC reducers PVC (SWR), complete all as specified

S&F 110mm PVC reducers PVC (SWR), complete all as specified

S&F PVC waste pipe fixed to any type of coupling of 40mm threaded complete all as specified

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified

M&L for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement all as specified incl mixing with water proofing compound (WPC shall be measured and paid separately), complete all as specified

M&L for 10mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on in ceiling finished even and smooth without using extra cement, complete all as specified

M&L for complete removal of existing treatment and preparation of old surfaces and applying two coat Acrylic emulsion with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed (Note:- Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means), complete all as specified

M&L for preparation of newly plastered surfaces and applying two coat Acrylic emulsion with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed (Note:- Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means), complete all as specified

Complete Removal of Existing tretment on ceiling surfaces including washing rubbingdown and stopping of distempered and painted surfaces complete all as specified

M&L for prpeparation of old plastered surfaces of ceiling and provision of 1mm thick putty and applying chalk whiting primer on new plastered surfaces ceiling and applying two coats of oil emulsion distemper complete all as specified

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered / decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed by Engr -in-Charge. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site), complete all as specified

M&L for newly plastered/ decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed. (Note : painting will be done by brush/ spray/ roller of building upto the height G+3 all as per directed by Engr-in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site), complete all as specified

Supply only liquid water proofing compound, complete all as specified

Demolition of reinforced cement concrete of any description and in any position not otherwise described, complete all as specified

Formwork to sides and soffits of coping beam finished surfases fair, complete all as specified

M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

M&L for RCC 1:2:4 type B1 (20mmgraded aggregate) as in Chajjas & roof slabs, complete all as specified

M&L for taking down existing waterproof treatment of tar felt of any description from roof surface and removing rubbish to a distance not exec 100 mtrs, complete all as specified.

M&L for water proofing on roof/ parapert with the following steps:- Step - I : SurfacePreparation : All loose and de-bonded concrete/ screed, loose particles, dirt & should be removed. Roof substrate must be pressure-washed with water with, a minimum working pressure of 1,400 psi is to be used to and/or remove all dirt, dust, chalking and waster products.Remove algae,mold by using bleach solution or biowash. Step - II : CrackRepair : All visible hairline cracks on concrete roof screed more than 0.50mm and not giving hollow sound, should be cut and widenin V shape with mechanical cutter in the size (10mm W x 6mm D). Apply a coat of (Dr. Fixit Pidiprime A/ Equivalent make) on the well-prepared groove; allow the coat to dry for 30 minutes before application of (Dr.Fixit PU/ equivalent) seal and withsuitable gun. Allow sealant to cure a minimum 72 hours. Step - III : ScreedRepair : Remove loose and damaged concrete roof screed in pockets with mechanical cutter. Clean the concrete screed with high pressure water jetto remove dirt and loose particles.Brush apply abondcoat of (Dr.Fixit Pidicrete URP mix/ equivalent) in the ratio of 1:1 (URP 1: Cement 1) by volume to makeit lump free slurry when applied on in the pre wet surface. Laid to fall roofscreed in correct slope and gradient. Mix Dr. Fixit Pidicrete URP 10%/ equivalent byweight of cement in (M20) concrete in ratio of 1:1.5:3 i.e., one bag of 50kgcements: 1.5 times volume of sand: 3 times volume of aggregates: 25L water. Level the repair mortar and finish with trowel. Moist cure should bedone for 7days. Air cure screed for 7days, before application of roof topcoatcoatingsystem Step - IV : Rain water outlets treatment : Hacking and chipping the surface around the rainwater drain outlet up to25mm in depth.Apply bond coat of Dr.Fixit PidicreteURP/ equivalent in the ratio of 1:1 (URP 1: Cement 1) by volume over the corners and pipe insert outlet gaps. Filling the gaps around drain mouth with (PMM) polymer modified mortarmixed with Dr. Fixit Pidicrete URP 10%/ equivalent by weight of cement in the ratio of 1:3.Providing & fixing 100mm width 45gsm glassfiber mesh all around the periphery of drain mouth of rainwater outlet sandwiched with Dr. Fixit Roof seal Classic/ equivalent. Apply the second coat of Dr.Fixit Roof seal Classic/ equivalent with an interval if 5-6 hoursall over the rain wate routlet.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on water proofing treatment with preparation of surface as on non assessable area complete all as specified

M&L for cement concrete 25mm thick type B-1, 1:2:4 (12.5mm graded aggregate) as in roof top etccomplete all as specified

M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry as on roof surface with grey cement and pigments, and cut and polished etc incl 15mm thick cement plaster in CM 1:4, complete all as specified

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out hard/ dense soil, complete all as specifed

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil. complete all as specifed

M & L for cement concrete 1:4:8 type D2 (40mm graded stone aggregate) using for foundation bed and filling, etc complete all as specifed and as directed.

M&L for RCC M-20 (nominal mix) (20mm graded stone aggregate) for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under reamed piles and mass concrete complete all as specifed

M&L for RCC M-20 (nominal mix) (20mm graded stone aggregate) for columns, pillars, piers, posts and struts, complete all as specifed

M&L for RCC M-20 (nominal mix) (20mm graded stone aggregate) for beams, cantilevers, bressummers and structs, complete all as specifed

M&L for RCC M-20 (nominal mix) (20mm graded stone aggregate) for chajjas supported on walls, beams and column in floors, roofs, alndings, blaconies, canopies, deck slabs and in shelves and the like, complete all as specifed

M&L for mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90mm dia or securing with chip)., complete all as specifed

All as per item No.97 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders complete all as specifed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter with rough finished sufraces of concrete, complete all as specifed

M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions with fair finished surfaces square, complete all as specifed.

M&L for Formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves includings supports, overhangs, etc also splays between floors and beams complete all as specifed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges, complete all as specifed.

M&L for fly ash Brick work straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specifed.

S & F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:- (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter - 01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall - 06 No per window.

S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified.

M&L for Framed work such as guarders, purlins, trusses, framed guard bars; barred iron doors; ladders; framed balusters; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specifed.

M&L for broken stone or boulders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a floor/ true surface, complete all as specifed.

M & L for 100mm thick PCC type D-2 1:4:8 (40mm graded stone aggt) in sub base of floor, complete all as specifed.

M & L for 50mm thick PCC type B-2 1:2:4 (20mm graded stone aggt) in top layer of floor to be finished even and smooth with using extra cement., complete all as specifed.

Returning fillng in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specifed.

Removing excavated material exc 1.5 km but n exc 5 km away from MoD Land form the starting point. complete all as specifed.

M&L for PCC 75mm thick type C-2 (1:3:6) using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specifed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and as directed.

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid( Frame work) complete all as specifed.

S&F Stainless steel curtain rod/ rail 25mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed.

S & Fixed Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specifed.

S&F vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specifed.

S&F low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specifed.

S&F vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specifed.

S&F chromium plated brass Central hole basin mixer swan neck pattern without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed.

S&F chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed.

S&F 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook. complete all as specifed.

S&F Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern), Stop cock/ angle cock all as specfied and directed.

S&F 110mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F Grating 100mm dia of CP with or without hole complete all as specifed.

S&F of waste coupling of any size and dia for stainless steel sink with drain board or without drain board, complete all as specifed.

S & F Vitreous China bowl urinal flat back, size of 430 x 370 x 340mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specifed.

S&F Chromium plated Urinal spreader/ flushing valve for urinal (As approved by accepting authority) fixing with 15mm dia pipe complete all as specified.

S & F Corner Glass Shelf of Size 300 x 300mm with Silver chromium finished border Oval Range premium quality complete all as specifed.

S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical vertical with closed top) hoisted with and including 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part-I complete all as specifed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specifed.

S & F PVC (SWR) Floor trap of 75mm outlet plain with grating including jointing with solvent cement, complete all as specifed.

M & L for cement concrete bed in PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) including packing under and haunching against sides of pipes after they are laid and tested complete all as specified. Note : Thickness of bed below the barrel of pipe 10cm for pipe 100mm and 150mm dia, 15cm for 200mm dia & over, complete all as specifed.

M & L for Salt Glazed stone ware pipes, 200mm dia grade "A", jointed with cement mortor, laid in trenches andincluding fittings of same grade, complete all as specified

M & L for Chequered cement concrete tiles 300 x 300mm, 25mm thick, as in floor/ path, set, jointed and pointed in neat cement slurry with grey cement and pigments, laid over and including 15mm thick screed bed in CM(1:4) all as specified, complete all as specifed.

Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M No-III Mhow after winding of the fan, replacement of defective parts, painting of the complete fan with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed.

Taking down carefully copper/ aluminium Sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- Note:- Make of modular GI sheet metal flush box should be same with switch/ socket.

(a) One light point controlled by one, one way switch 5 Amps, complete all as specified and directed

(c) One fan point point controlled by one, one way switch 5 Amps and regulator, complete all as specified and directed

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board., complete all as specified and directed

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad., complete all as specified and directed

(f) One bell point controlled by one, bell switch 5 Amps, complete all as specified and directed

All as per item No.141 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 2.5 Sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F for Modular Switch flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module flush type complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module flush type complete all as specified.

S & F for for Bell push modular 6 Amps single module complete all as specified.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 Sqmm for P and N and one run of same size earth and one run of PVC conduit will be measured as one unit

S & F for lamp holder, PVC/ Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed.

Supply and fixing Inverter LED batten 4 feet 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 4-10 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and directed

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed

S & F for sheet metal enclosure MCB DB SPN 6/8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed

Supply and fix MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed

Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed

S&F replacement of ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, electronic regulator and remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 26W (+ 10%) and rate speed 350 RPM (+ 10%) Min air delivery 210 CFM with service value shall not be less than 8.46 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including writing the MES number with synthetic enamel paint complete all as specified and directed.

Supply and fixing 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed.

Supply & fix metallic exhaust fan AC single phase 230/ 240 V of size 300mm sweep with louver/ mesh wire including cutting the existing wall for making a hole of appropriate size for fixing the exhaust fan and making good the disturbed surface complete duly connection with copper wire etc completeincl taking down of ceiling fan in safe custody and deposit to E/M Store, complete all as specified and directed.

Sppply & Laying XLPE insulated, armoured, electric cable of size 10 sqmm 2 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply laying and jointing GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. (Note : Punned thickness shall be measured)

M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate No 3 of SSR Part-I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4mm dia and 15mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supply and laying of Galvanised Iron water pipe, medium grade, of size 25mm bore laid in trenches/ on wall etc complete with all stop valve, reducer of suitable size and GI accessories bends sockets complete all as specified

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of size 25mm bore complete all as specified

M & L for drilling/ cutting and tapping CI/DI/GI water mains (in position) for branch connection of the internal dia 80mm and connecting tee of suitable size complete all as specified.

Supply laying and jointing Stop valves, 25mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified

RK CONSTRUCTION (BID ID -3277848)

Sameer Auto Engineers (BID ID -3281258)