Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹19.2 L
EMD Value
₹20,200
Closing Date
20 Jun 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
sunil
Construction of a community hall near Rajivnagar Anganwadi, Ward No. 7 in Nrpura TP limit
DMA/2025-26/BD/WORK_INDENT40252/CALL-2
DMA/2025-26/BD/WORK_INDENT40252/CALL-2
Reserved
Buildings
Two Tender Document System(Two Cover)
DMA Town Panchayat Narasimharajapura
6 documents required · 6 mandatory
KPWD Class IV and above Registration
Tenderers, will only be qualified, if their available tender capacity is more than the total tender value. i.e. AxNx5 - B as per KW-1 Document for the last five years i.e.,2019-20 to 2023-2024 OR 2024-25. The Bidder must submit the Annual Turnover Certificate issued by Auditor/Workdone Certificate issued by not below the rank of Executive Engineer for computing the value of A and B
The contractor belonging to Category II(A) should upload Caste Certificate issued by Competent Authority.
The contractor belonging to Category II(A) shall be domicile of the State of Karnataka for more than 10 years.Should upload Certificate issued by Competent Authority.
existing commitments and on-going works to be completed during the next Four months in the prescribed format from the Competent Authority not below the rank of Executive Engineer /District Level Officer
Name, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer
Contractors has to upload the EPF Registration (with Challan April-25)
Contractor has to upload GST Declaration Certificate in the prescribed format.
₹500
₹20,200
4 Jun 2025
4 Jun 2025
21 Jun 2025
17 Jun 2025
Construction of a community hall near Rajivnagar Anganwadi, Ward No. 7 in Nrpura TP limit
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depthnot exceeding 300mm as per drawing and tec...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(2023-24 SR Details: Vol 2, Page 9, It No 5.2) ---- Including co...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(2023-24 SR Details: Vol 2, Page 9, It No 5.4) ---- Including cost and conveyance o...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
GST DECLARATION CERTIFICATE (1) (1).docx
Instructions to Tenderers • 0.01 MB
required docs only upload in eproc (2).pdf
Instructions to Tenderers • 0.84 MB
40252 KW-1 catII(A).docx
Instructions to Tenderers • 0.76 MB
caste list.new.pdf
Instructions to Tenderers • 11.52 MB
kw-1 Qualification information (3).docx
Instructions to Tenderers • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .