Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹48.4 CrAccepted-AOC | ₹48.4 Cr | 1 | Accepted-AOC Accepted |
| 2 | 2₹56.7 CrRejected-Finance | ₹56.7 Cr | 2 | Rejected-Finance Rejected |
| 3 | Rejected-Technical | - | - | Rejected-Technical as per Evaluation Report |
Tender Value
₹40.5 Cr
EMD Value
₹20.3 L
Closing Date
29 Oct 2024, 12:00 pmClosed
City ENgineer
MBMC Head Office
Proposed Construction of Hindu hriday Samrat Balasaheb Thackery Art Gallery at Res. 122 Bhayandar East (Basic Facility Development Fund)
2024_MBMC_1113280_1
MBMC/PWD/Tender/98/24-25
Open Tender
Civil Works
545 days
MBMC
Please refer Tender documents.
4 documents required · 4 mandatory
₹3,540
₹20.3 L
4 Apr 2025
14 Oct 2024
30 Oct 2024
14 Oct 2024
29 Oct 2024
14 Oct 2024
Amount
Description
Excavation for foundation of structure as per drawing and technical specifications including setting out, construction of shoring , brushing, removal of stumps and other deleterious matter, dressing of side and bottom and back filling with approved material etc. complete. (in marshy soil by mechanical means)
Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means
Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and struttingetc. complete (lift upto 1.5m) By Mechanical Means
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means
ITEM NO 03 TRANSPORTING OF EXCAVATED MATERIALS lead 20.00 k.m. SSR C1
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR 21.38 / 201
Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/ quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (PCC) SSR 24.10 / 227
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 21.37 / 201
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. SSR 21.36/195
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C columns and steel stanchion etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.15/231
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.74 / 237
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 26.33 / 245
Providing and applying Anti corrosive treatment to reinforcement as per cement polymer composite coating (C.P.C.C.) method developed by C.E.C.R.I. including cleaning the bar by means of any establish0ed mechanical or manual method for removing rust and deleterious material, applying rapid setting primer and cement polymer sealing coat of approved and licensed by CECR Iincluding redoing the process if damage occurs during handling, stacking etc. complete. (With prior approval of SE)
Providing filling of Micro -concrete and 10mm aggreagate (1:1)including scarificial leak proof MS shuttering includes the cost of hire charges of all machineries, barge, boat , cost of all tools and all labour charges etc., complete.
Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.
Providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. complete.
Providing and fixing in position steel fibre reinforced concrete (SFRC) frame and covers of approved make including, 0.90 x 0.60 m in size loading, unloading, transportation, all taxes etc. complete as directed by Engineer-in-charge(20 tonnes capacity)
Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter (as per IRC861983)embedded 125mm below ground level over M-10 PCC finished neatly withC.M.1:2, setting the same in C.M.1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge.Using Concrete Batching and Mixing Plant
Providing and Fixing Processed Stone Cladding on wall surface /plywood surface. RCC pardi /Wall and all type of Interior, Exterior Compound wall and Gateetc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures,Colour pigments, Fiber up to thick of 230mm/ 25mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)
Extra for providing additional thickness of brickbats over 100 mm in 1:5 c.s. either due to location of rain water pipes or due to increase in the travel length of flow of rain water or brick bats required in the sunk portion of baths, W.C.s nahani etc. The rate includes for fixing brickbats in C.M., with waterproofing compound as per specification as directed.
Providing and applying one pack bonding coat between concrete members like RCC slabs, columns, beams, chajjas, pardi setcand cement mortar plaster using Bonding Agent of approved make & approved by Engineer incharge. Clean the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface. Apply Bonding agent of approved make & approved by Engineer incharge by spray on the entire concrete surface. Provide a lean cement-sand dash coat over the same.Allow the dash coat to set for around 24 hours. Further plastering as per specifications
Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge, grooving, moulding etc in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge.(Gangsaw Granite or Equivalent)
Providing & Fixing in position, Carpet more than 1200 gsm, made with 100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etccomplete
Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.
Providing wax polishing to floors and dado, preparing the surface, scaffolding etc. complete.
Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring
Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Skirting
Rounding the edge in half round shape of the stone work specified below including high gloss machine polishing as directed by Engineer In Charge.a) Kota stone
Rounding the edge in half round shape of the stone work specified below including high gloss machine polishing as directed by Engineer In Charge.c) Any type of Granite stone
Champhering the edge of the stone work specified below including high gloss machine polishing as directed by Engineer In Charge.a) Kota stone
Champhering the edge of the stone work specified below including high gloss machine polishing as directed by Engineer In Charge.c) Any type of Granite stone
Providing & making 5mm gap in flooring & dado by using Spacer and gap to be filled with epoxy polymer based grout of Bal Endura make to match the colour & shade of flooring tiles as per instruction of Engg. In charge etc complete.
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of epoxy paint and over it two coats of oil painting of approved quality and shade etc. complete.
Providing and fixing double scaffolding system (cup lock type) on the exterior side ofbuilding/ structure, including additional rows of scaffolding in stepped manner as perrequirement of site, madewith 40mmdiaM.S. tube, placed 1.5metre centre to centre,horizontal & vertica ltubes jointwith cup & locksystemwithM.S.Tubes,M.S. tube challis,M.S.clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it there after. The scaffolding system shall best if fened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the work men etc., complete as per directions and approval of Engineer-in-charge.
Providing & fixing in position 35 mm thick 1st quality water proof Single Leaf Flush Door for w.c. with 1mm thick laminate on both sides with 12x35mm lipping patti on all egdes. Rate is Inclusive of s.s.fixtures & fittings, such as handles on both sides, tower bolts, locking arrangement,, door stopper of make ( Dorma,Geze,Hafle ) 450 x 150mm aluminum ventilation grill powder coated, as per architect's detailed drg.and design etc.complete
Single Leaf Flush Door Providing and fixing of single leaf flush door with, shutter to be made of 35 mm thick marine grade block board core with teak wood lipping patti & 1 mm thick approved decorative laminate finish on both faces. All exposed T.W. surfaces to be painted in 2 coats of flat enamel paint of approved shade over 1 coat of primer of approved make inluding prepatation of surface. All surfaces of frame, in contact with brock masonry or concrete should be tar painted. (Black Japan). All other necessary fittings and fastenings to be of chrome finish brass. (Unless otherwise mentioned in the drawing)
Fire rated Double leaf Door - Laminate Finish: Providing & Fixing of Wooden Fire door without Panic Bar of approved make and of required size, 120 minutes fire rating, integrity and insulation in accordance with the criteria of BS 476 ; Part 22 : 1987 and report 212 (1)/FR/2003; Insulation on door leaf only. Tested at Fire Research Laboratory, Central Building Research Institute, Roorkee with standard heating conditions as specified in IS : 3809-1979 and BS : 476 part 20 & 22, 1987 to achieve the required integrity & insulation (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140 degree Centigrade above the ambient temperature on the unexposed surface of the shutter). Red Mirranti Hard wood frame of section 145mm x 70mm with Intumescent strip (Imported) to take care of Hot and cold smoke of size 10mm x 2mm x 2Nos. Concealed in the grove of the frame and 55mm thick single leaf shutter made out of perimeter railing of Red Mirranti wood of size 100mm x 29mm and promina 60.9mm thick Calcium Silicate Board Fire Retardant compound on each side coated with Intumescent sealant and faced with 4mm thick marine ply with Fire and smoke Intumescent Seal of size 20mm x 2mm x 1 No., mounted in the grooves in the shutter on all sides except bottom with 10mm thick Hardwood beading on all side. The Fire Doors with frame will be as per IS: 3614 part 2 and BS: 476 part 20 at FRL CBRI Roorkee with standard heating conditions as specified in IS: 3809 - 1979 and BS: 476 part 20 & 22 1987. The door shall be finished with 1 mm thick fire retardent laminate on both side etc.,with approved Stainless steel fittings & Fixtures all complete to the entire specification as per Architect's Instruction.FRD -2 SIZE- 1.250 x 2.350m as Directed by Engineer Incharge.
Providing and fixing ISI marked double swing flush door shutters conforming to IS :2202 (Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel L- hinges with necessary screws Fittings & Fixtures per leaf SS kick plates on both sides of the door of 300mm height Heavy Duty satin finish butt SS Hinges (100mm x 75mm x 3mm in size) -4 nos. SS finished lever handle with mortise lock- 1 One Number Floor spring- 1 One Number 100mm x 100mm safety glass at the specified location
Supply,installation,testing and commissionig of extruded aluminium powder coated linear 8"Grilles for Supply /Return grill without volume control dampers.
Supply & Installataion laminate 1mm thk both side laminate hyadraulic pressed by machine make century virgo Or Equivalent as directed by Engineer in charge etc completed
Supply & Installataion SS ball bearing butt hinges 5" each door make ( Dorma,Geze,Hafle) as directed by Engineer in charge etc completed
Supply & Installataion Surface mounted door closer With standard arm size 2 each door make ( Dorma,Geze,Hafle ) as directed by Engineer in charge etc completed
Supply & Installataion Pull handle back to back fixing each door make ( Dorma,Geze,Hafle ) as directed by Engineer in charge etc completed
Supply & Installataion autodrop seal each door make ( Dorma,Geze,Hafle ) as directed by Engineer in charge etc completed
Supply & Installataion mortise Cylinder dead lock back, set,24mm foreend With Euro profile double cylinder keyed Diff.Door lock 1 each door make ( Dorma,Geze,Hafle ) as directed by Engineer in charge etc completed
Supply & Installataion 10mm thk rod SS tower bolt 4 each door make ( Dorma,Geze,Hafle ) as directed by Engineer in charge etc completed
Making holes in 75 mm to 200 mm brick/concrete/rubble walls for drainage pipes, fittings, etc. and making good the same in cement mortar 1:3 or cement concrete 1:2:4 & finishing on both sides with cement plaster and 3 coats of white or colour wash as directed by Engineer in charge etc. complete.
providing and fixing RCC CHAMBER COVER 900*450 size capacity 10MT /Sqm as per instruction by engineer incharge
Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.
Providing and laying wedge shear elemental layer (WSEL) by using rubble stone of size 15 to 20 cm thick in single layer of 230 mm including packing the same with 20 mm to 40 mm thick aggregates ( normal size) and using stone powder of 40 mm to 50 mm thick on surface and watering & compacting by vibratory roller confirming layer thickness of minimum 200 mm and as directed by Engineer - in - charge etc complete.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and VSat attachment.to the required density. By Manual Means Grading II (Using Screening Type B (11.2 mm) Aggregate)
Providing and Laying M60 grade cement concrete of approved mix design with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use of micro silica/alcofine, approved make super plastiser and retarder, fibriliated 100 % virgin polypropylene fibres, fly ash and transported by transit mixer and placing at work site. Compacting, finishing, initial curing by approved curing compound/ contractors water and tarring the sides of slab with hot bitumen as specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid separately) for Ultra thin White Topping (UTWT) pavement. etc completed.
Green Cutting of construction & dummy joints of concrete grade M 40 and above (UTWT) pavement by mechanical means within 10 to 12 hrs after casting of bay / slab upto 1/3 rd depth of pavement and 5 to 6 mm wide as directed
Providing and Placing 5mm thick Thermocole in dummy and construction joints immdtly after cutting of joints and removing the same before dressing of dummy and construction joint as directed etc. complt.
Providing and construction of cement vatta in C.M.1:10 at 0.6 M X 0.6 M c/c admeasuring 0.09 meter at bottom, 0.04 m at top and 0.075 m deep and maintaining the same throughout 7 days curing period and removing the same material as directed.
Sealing of M-35 & above new C.C. pavement dummy, transverse, longitudinal joints with hot rubberised sealing compound confirming to IS 1834-1984 after proper cleaning with compressed air, applying required primer & providing a layer of lime powder over hot sealing compound as directed. Sealing 5mm - 6 mm wide & avg. depth of 40 mm transverse & longitudinal joints
Providing and lyaing of hot applied themoplastic compound 2.5mm thick White /Yellow including reflectorising glass beads @250 gms.per sqm area,thickness of 2.5mm is exclusive of surface applied glass bead as per IRC 35. The finished surface to be level, uniform and free from streaks and holes etc.complete with 3 years guarantee
Providing and fixing Speed Breakers of Size 350 W x 500 L x 50 H mm yellow black color as shown in the drawing with necessary fittings & fixtures as directed by EIC.
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded bodyand reflective panels with microprismatic lens capable of providing total internal reflection of the lightentering the lens faceandshall support a load of 16000 kg tested in accordance to ASTM D4280 Type Hand complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97DOIII Dt 11.06.1997. The height, width and length shall not exceed 50mm, 100mm and 102+/-2 mm and with minimum reflective area of 13 Sqcm one ach side and the slope to the base shall be 35+/-5 degree.The strength of detachment of the integrated cylindrical shanks , (of diameter not less than 19+/-2mm and height not less than 30+/-2mm) from the body is to be a minimum value of 500Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.
Design, supply & installation of 4 mm thick Aluminium Composite Panels (ACP) of Alcopla make or other equivavalent approved make. material consisting of 3mm thick FR grade mineral core sandwitched between two aluminium sheets (each 0.5 mm thick The fixing will be done fabrication comparious Durol or other equivavalent company Backup MS GJ frame work, & aluminium frame along with backer rod, Dow corning Silicon sealant etc.complete as directed by the engineer. The rates should include provide design alongwith shop drawings and getting approval from consultant.ACP CLADDING
FIRE SEALANT FOR PIPE AND DUCT HOLES AND ANY OTHER. Supplying, Loading, Unloading, Installations, Testing , Commissioning of fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles ( Except hollow core conductors). The residual openings shall be closed with filler. as Directed by Engineer Incharge.
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.
Providing & Fixing Slidding window systems are manufactured from Rigid Thermo Vinyl Polymer (RTVP) Profiles suitable for tropical development.The profile are with multichambered construction.The nominal thickness of outer wall is 2 MM.The outer frame size is 105 x 52 mm.Roller shutter frame 60 x 27 mm & Handle shutter frame 52 x 30mm. Glass panels used in window system shall be of 6mm thick clear float glass manufactured by Modiguard/Saint Gobin/Asahi or any other approved equivalent. The window systems are prefabricated in fatory.All the corners of outer frame & shutter are fusion welded under pressure to a pre-determined temp.& time ,as per the specification & design.The structural reinforcement chambers are not exposed to any drainage routing.The steel reinforcements are 1.5mm thk.hot dip galvanised & passivated for corrosion resistance & tropical development.Slidding track is made of UPVC profile, which is the part of outer frame for smooth movement of shutter. Sliding roller assembly consist of Nylon Roller & Zinc Alloy casting body.Mosquito frame is part of the slidding outer frame.Gaskets are made of Ethylene Propylene Dienemer (EPDM).which has good wheathering properties & resistance,to tear & decay to OZONE & U.V.exposure.as per manufacturers specification as directed by Engineer in Charge etc. complete as Directed by Engineer Incharge.
Providing and fixing SS Mosquito mesh in anodised (anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodising must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) aluminium shutter fixed in sliding / openable / fixed windows conforming to IS:1948-1961 as per drawing and directed by Engineer In Charge.(Note: For Aluminum Sections, total weight shall be upto 3.5 kg/sq.m.)
SITC of Elevio Automatic Elevator with· Rated capacity :- 20 Passenger/1360Kg · Floors :- G+1 floor (2Stops/2 Landings) · Travel :- 4.5 mtrs · Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1000 mm wide x 2000 mm high · Clear Car size of 2000mm wide x 1550mm deep x 2200mm high · Lift shaft available having clear size of 2940mm wide x 3440mm deep, 1550mm Pit depth, 4250mm Overhead.-CAR DOOR of Two Panel center opening auto door matarial- SS304 Stainless Steel in Hairline Finish [SSHL]. FLOORING-SS Chequered Plate. False Ceiling-Stainless Stee l.LIGHT & FAN-LED Light & Axial Flow Fan. C.O.P--Illuminated Buttons with Colour LCD Display for Direction & Position Indicator. MAIN POWER SYSTEM-415 Volts, 3Phase, 50Hz A.C AUXILIARY SUPPLY SYSTEM-220/230 Volts, Single Phase, 50Hz A.C OPERATION-Simplex Full Collective System without attendant REQUIRED DRIVE--ACVVVF Advantages of CANBUS Controller,Three way Intercom,Car Ventilation, Battery Operated Emergency Alarm Bell & Light,Firemans Switch at main lobby,Overload Warning Indicator, Automatic Rescue Device (ARD),Full Curtain Infrared Door Safety,Machine Beam (ISMB),Floor Announcement System with Soft Music,Anti-nuisance,Car call Cancellation, Full Load Automatic Bypass,Direct Landing, Anti-stall timer Protection,Start Protection Control,Automatic power Light & Fan off Including required scaffolding & strctural steel bractes for erecting lift as per above specification obtaining required all necessary permissions of Lift inspector (PWD) to errect and complete the elevator work,Lisons to operate the elevators including all necessary charges,payments for the same etc complete.
SITC of Elevio Automatic Elevator with· Rated capacity :- 20 Passenger/1360Kg · Floors :- G+2 floor (3Stops/3 Landings) · Travel :- 4.5 mtrs · Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1000 mm wide x 2000 mm high · Clear Car size of 2000mm wide x 1550mm deep x 2200mm high · Lift shaft available having clear size of 2940mm wide x 3440mm deep, 1550mm Pit depth, 4250mm Overhead.-CAR DOOR of Two Panel center opening auto door matarial- SS304 Stainless Steel in Hairline Finish [SSHL]. FLOORING-SS Chequered Plate. False Ceiling-Stainless Stee l.LIGHT & FAN-LED Light & Axial Flow Fan. C.O.P--Illuminated Buttons with Colour LCD Display for Direction & Position Indicator. MAIN POWER SYSTEM-415 Volts, 3Phase, 50Hz A.C AUXILIARY SUPPLY SYSTEM-220/230 Volts, Single Phase, 50Hz A.C OPERATION-Simplex Full Collective System without attendant REQUIRED DRIVE--ACVVVF Advantages of CANBUS Controller,Three way Intercom,Car Ventilation, Battery Operated Emergency Alarm Bell & Light,Firemans Switch at main lobby,Overload Warning Indicator, Automatic Rescue Device (ARD),Full Curtain Infrared Door Safety,Machine Beam (ISMB),Floor Announcement System with Soft Music,Anti-nuisance,Car call Cancellation, Full Load Automatic Bypass,Direct Landing, Anti-stall timer Protection,Start Protection Control,Automatic power Light & Fan off Including required scaffolding & strctural steel bractes for erecting lift as per above specification obtaining required all necessary permissions of Lift inspector (PWD) to errect and complete the elevator work,Lisons to operate the elevators including all necessary charges,payments for the same etc complete.
Providing & fixing European type white glazed earthenware water closet of perryware,Hindware or equivelent MAKE,wall hung closet to be used with cistern as per Model No. 89334 with size (H X W X P) 51cm x 35cm x76cm pan including 'P' or 'S' trap with white bakelite including C.I. soil & vent pipes upto the outside Market Ratece of the wall and 100 mm dia. C.I. Plug bend, and flush bend and inlet pipe with brackets for fixing the cistern 40 mm dia. G.I. overflow pipe, painting of the exposed pipes and cutting and making good and floors.as directed by architect &Engineer-In-Charge etc.complete
Providing and fixing C.P.Two way BIB cock parryware make or equivalent Quattro collection (CAT.NO. T2334A1) including necessary sockets/union nut etc. complete.
Providing and fixing C.P.Auto Closing concealed urinal flush valve parryware make or equivalent lapis collection (CAT.NO. G2030A1) including necessary sockets/union nut etc. complete.
Providing and fixing C.P.Auto Closing concealed WC Dual flush valve parryware make or equivalent (CAT.NO. T3305A1/T3307A1) including necessary sockets/union nut etc. complete.
Providing and fixing 15 mm diameter PVC Aqua kraft type parryware make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete
Providing & Fixing 46 x 30cm. Size of white glazed vitreous chinaware Square shape wash Basin of perryware,Hindware or equivelent MAKE, Model No. 895V wash basin Square overcounter including cold water concealed piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, painted with two coats of white enamel paint over a coat of white enamel paint over a coat of anticorrosive primer, 32mm dia. PVC inlet connection etc. complete ( 32 mm dia. G.I. waste pipe is measured and will be paid separately ) Rate to include making necessary connection to Nahani trap / waste as directed by architect &Engineer-In-Charge etc.complete
Providing and fixing white vitreous urinal basin of perryware,Hindware or equivelent MAKE , Series whiz Model No. 0580 with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required as directed by architect & Engineer-In-Charge etc.complete
Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. T2316A1) including necessary sockets/union nut etc. complete.
Providing and fixing SS 304 Towel rail (24") perryware, hindware or equivalent make including all fitting etc completed
Providing and fixing SS 304 Soap dish perryware, hindware or equivalent make including all fitting etc completed
Providing and fixing SS 304 Toilet paper holder perryware, hindware or equivalent make including all fitting etc completed
Providing and fixing SS 304 Towel ring perryware, hindware or equivalent make including all fitting etc completed
Providing and fixing SS 304 Twin robe hook perryware, hindware or equivalent make including all fitting etc completed
Providing and fixing SS 304 Soap dispenser perryware, hindware or equivalent make including all fitting etc completed
Providing & fixing of HM-MCP Call Point are an addressable manual break glass call point, simple rotary decade, switch at the rear ofthe unit for addressing, nalogue addressable communications, Integral LED, EN54 approved. Make :- Honeywell Morley Model No. :- HM-MCP-FLEX
Providing & fixing of The Wall Mount sounder strobe integrates a 32 tone sounder and high quality strobe into one device. It is powered by the fire panel via the loop wiring. Control of the device is enabled using on-board switches, some of which can also be adjusted through SS Advanced Protocol. The device is installed simply by a twist fit onto the B501AP base.Supply Voltage: 15 to 29VDC (Non-isolation) 15 to 29VDC (Isolation) Standby Current: 120μA (Non-Isolation) 225μA (Isolation) Max current consumption sounder and strobe: 14.5mA (High Volume Tone 11 @15V) Max Sound Output 97dB(A) +/-3dB @1metre (High Volume, Tone 8 @24V) [Tone Dependant - Figure stated is based on high volume 970Hz continuous @24VDC] Make :- Honeywell Morley Model No. :- WSO-PR
Providng & fixing of addressable four-loop, fire detection system supports Morley protocol. It comes with two sounder circuits (1A max), a 2A power source, a general relay (Alarm and Fault), one programmable relay, a fixed auxiliary output and resettable 24V 250mA output, two keys and two inputs for programmable functions. It also includes a 6 * 40 LCD graphic display, an integrated USB port for PC programming and an RS485 port for repeaters. Total Loop Capacity (396 Detector +396 Devices) Networking up to 16 loops 6x40 characters, blue liquid crystal display with backlight illumination Configuration by keypad and PC 160 Fire Zones Fire, Fault and Auxiliary relays Loop-Battery calculator for reliable system design 7 day timer Onboard diagnostic EN54-2, EN54- 4 LPCB approved Optional: 40, 80 or 160 zone alarm LEDs Make :- Honeywell Morley Model No. :- DX4C
SITC of 1100 V grade XLPE insulated sheathed & steel armoured copper Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 2 C X 1.5 Sq. mm. A X F Y XLPE
Providing & fixing of HM Series Advanced Intelligent Thermal Sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel. The HM-RHSE, HM-RHSE-I provides fixed 58°C and rate-of-rise (10°C / minute) temperature sensing (Class A1R). The HM-FHSE, HM-FHSE-I provides fixed 58°C temperature sensing (Class A1S). 15 to 32Vdc 260µA at 24Vdc (no communications) 310µA at 24Vdc ( LED blink enabled, once every 5s) 3.5mA at 24Vdc REMOTE OUTPUT VOLTAGE REMOTE OUTPUT CURRENT ADDITIONAL LOOP RESISTANCE USING THE B501AP 22.5Vdc @ 24Vdc 10.8mA @ 24Vdc typ 20mohm (max 30 mohm) Make :- Honeywell Morley Model No. :- HM-RHSE
Providing & fixing of addressable optical smoke detectors, HM-PSE, HM-PSE-S2 has two integral red LEDs that provide 360° local visual indication of the device status.ELECTRICAL SPECIFICATIONS - NON-ISOLATED PRODUCT (HM-PSE-S2) HEIGHT OPERATING VOLTAGE RANGE MAXIMUM STANDBY CURRENT 52mm installed in B501AP base 260µA at 24Vdc (no communications) / 310µA at 24Vdc (LED blink enabled, once every 5s) 260µA at 24Vdc (no communications) 310µA at 24Vdc (LED blink enabled, once every 5s) LED CURRENT REMOTE OUTPUT VOLTAGE REMOTE OUTPUT CURRENT 3.5mA at 24V 22.5Vdc @ 24Vdc 10.8mA @ 24Vdc ADDITIONAL LOOP RESISTANCE USING THE B501AP typ 20mohm (max 30 mohm) ELECTRICAL SPECIFICATIONS - ISOLATOR VERSION (ONLY FOUND IN HM-PSE-S2-I) OPERATING VOLTAGE RANGE MAXIMUM STANDBY CURRENT ISOLATION CURRENT 15 to 28Vdc 200µA at 24Vdc (no communications) 300µA at 24Vdc (LED blink enabled, once every 5s) 15mA at 24Vdc MAXIMUM CONTINUOUS CURRENT REMOTE OUTPUT VOLTAGE ADDITIONAL LOOP RESISTANCE 1A (Switch Closed) 22.5Vdc @ 24Vdc typ 80 mohm @24V (max 170mohm @ 15V) ADDITIONAL LOOP RESISTANCE USING THE B501AP typ 20mohm (max 30 mohm)
Providing & fixing of addressable optical smoke detectors, HM-PSE, HM-PSE-S2 has two integral red LEDs that provide 360° local visual indication of the device status.ELECTRICAL SPECIFICATIONS - NON-ISOLATED PRODUCT (HM-PSE-S2) HEIGHT OPERATING VOLTAGE RANGE MAXIMUM STANDBY CURRENT 52mm installed in B501AP base 260µA at 24Vdc (no communications) / 310µA at 24Vdc (LED blink enabled, once every 5s) 260µA at 24Vdc (no communications) 310µA at 24Vdc (LED blink enabled, once every 5s) LED CURRENT REMOTE OUTPUT VOLTAGE REMOTE OUTPUT CURRENT 3.5mA at 24V 22.5Vdc @ 24Vdc 10.8mA @ 24Vdc ADDITIONAL LOOP RESISTANCE USING THE B501AP typ 20mohm (max 30 mohm) ELECTRICAL SPECIFICATIONS - ISOLATOR VERSION (ONLY FOUND IN HM-PSE-S2-I) OPERATING VOLTAGE RANGE MAXIMUM STANDBY CURRENT ISOLATION CURRENT 15 to 28Vdc 200µA at 24Vdc (no communications) 300µA at 24Vdc (LED blink enabled, once every 5s) 15mA at 24Vdc MAXIMUM CONTINUOUS CURRENT REMOTE OUTPUT VOLTAGE ADDITIONAL LOOP RESISTANCE 1A (Switch Closed) 22.5Vdc @ 24Vdc typ 80 mohm @24V (max 170mohm @ 15V) ADDITIONAL LOOP RESISTANCE USING THE B501AP typ 20mohm (max 30 mohm)
Providing & fixing of Two-Way Inlet Breeching, Body: Gun Metal or Aluminum Alloy or Cast Iron Inlet: Two Instantaneous with NRV, Outlet: 4” Flanged, Working Pressure: 10 Bar, Test Pressure: 23 Bar Make :- Newage
Providing & fixing of following sizes of pipes conforming to IS-1239 with all accessories GI class'C' heavy grade MS fitting with welded joint shall be used] including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts, bolts, washer including supporting/fixing the pipe on wall /ceiling with clamps, hangers (using anchor fastners) as per specification.
Providing protection to embedded MS/ GI pipes and fittings by applying protective primer (@ 100 gm/sqm) thereafter wrapping 4 mm thick protection coating by thermo fusion process. Overlap shall be maintained at 15 mm. The application process shall be strictly according to manufacturer’s specification.
Proving & fixing of High Power Amplifier high efficient Power/Booster amplifier provides audio signal amplification for public address and voice alarm system, It is reliable,efficient and light in weight 180~250 Volts AC | 50 Hz Mains power supply0.1% THD + N @ 1 KHz Unbalanced Line in - LineOut| 100 V signal input Signal input / OutputClass D >90% efficiency Amplifier topology 70 Hz to 20 KHz Frequency response102 SNR (dB) Make:- Honeywell
Proving & fixing of HN-CL06 has two spring clamps which can be used to easily fix the speaker into the false ceiling. It has three power taps (6/3/1.5W) with the built in 100V transformer. The round metal grille is well fitted in the front Make :- Honeywell Model No:- HN-CL06
Supplying, erecting, testing and commissioning of multistrand Sheilded bare copper conductor, transparent PVC insulated 2C x 1 sqmm speaker wire in provided trunking/conduit etc. as directed by Engineer in charge etc completed Blue colour
8 Zone Voice Alarm controller with built-in USB, MP3, AM/FM player, SD Card and 8 zone paging station, interface between field devices such as loudspeakers and local audio sources. EVACPRO-G2 is a cost effective solution for requirements less than 16 loudspeaker circuits(zones). The unit has 16 emergency inputs (15 Zone wise & 1 for all zones) and 16 loudspeaker circuits (zones). The unit also can store and play prerecorded emergency messages to alert or evacuate the fire zones, 540 X 577 X 250 mm Dimension (W x H x D)300mv Line Input 4 Pin DIN Condenser type with N/C contact Microphone InputBalanced and unbalanced through phoenix connector - 1.2 V Line Output 20Hz to 20 KHz Frequency Response0.01% Total Harmonic Distortion(THD)
SITC 4U 600 x 600 perforated wall mounted racks with shelf, front glass door, Power strip. as directed by Engineer in charge etc completed
Providing & fixing of 1 Port- 10 Gig Module for Staking incls. Of required card, standard accessories & Hardware." Make :- D-Link
SITC 6 Core single mode fiber optic cable with 25MM PVC conduit as directed by Engineer in charge etc completed
SITC 6 Port wall mounted fully loaded LIU with SC coupling as directed by Engineer in charge etc completed
Supplying, erecting & terminating 10 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete.
Supplying & erecting 4 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, Maximum sustained transfer rate 150MB/Sec to 180MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 64, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR
Proving & fixing of 12 -FIBER PORT SC- STYLE, SM, 19" RACK MOUNT LIU,1U, LOADED WITH ADAPTER PLATE
Providing & Fixing of non intilligant Power distribution unit with 6 indian standar sockets (6/15Amp), 16A modular MCB, surge & over voltage protection, Fuse protection, 3 Mtr. Long power cable, Black in colour.
Providing & fixing of 9U(550W X 5000 D)MM FLOOR FLOOR MOUNT CLOSED RACK WITH VERTICAL CABLE MANAGEMENT FOR CABLE, FRONT GLASS DOOR, REAR PERFORATED DOOR WITH STANDARD ACCESSORIES & 2 NOS. VERTICAL POWER STRIP.
Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping
Supplying and fixing 1 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of Cat 6 type, compliant ANSI/TIA-568.2-D standards in position
Supplying and erecting 12 fibers LSZH armoured multimode optical fiber cable with , core dia 50/125 μm (OM3), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ceiling or laid in provided pipe/trench
Supplying and fixing SC/SC type multimode pigtails (OM3) for LIU to terminate OFC in LIU
Supply, Installation, Testing & Commissioning of Under deck Insulation Underdeck Insulation With 19MM Thick “thermal nitril rubber with 36G Aluminium Foil
Providing and fixing trap door in the Gypsum board / POP ceiling system for elecrical and mecanical utilities with 18mm thk. plywood shutter and 12mm thk. teak wood lipping all around including wooden / G.I. frame with supports, fixtures, fastenings etc. complete as directed.
Providing and fixing aluminium powder coated trap door as per required size for AHU unit as per manufacture details specifications etc complete.
Supply / Installation / Testing / commissioning Ceiling Suspended Cabinet type Fresh Air Fans & Casing, drive, motor, Filter, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities :As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204 / ISO 1940 standard Supply, Installation, Testing & Commissioning of 1550CFM Cabinet Type
Supply / Installation / Testing / commissioning Ceiling Suspended Cabinet type Fresh Air Fans & Casing, drive, motor, Filter, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities :As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204 / ISO 1940 standard Supply, Installation, Testing & Commissioning of 1650 CFM Cabinet Type Inline Fan
Supply / Installation / Testing / commissioning Ceiling Suspended Cabinet type Fresh Air Fans & Casing, drive, motor, Filter, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities :As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204 / ISO 1940 standard Supply, Installation, Testing & Commissioning of 2100 CFM Cabinet Type Inline Fan
Supply, Installation, Testing & Commissioning of Freshair Axial fan For Lobby & other HVAC system Ventilation Unit With DIDW Fresh Air Fans & Casing. Supply, Installation, Testing & Commissioning of 4900 CFM
Supplying, installing, testing and commissioning of INLINE / PROPELLER FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±10% volt single phase 50 cycles AC supply. All units shall be complete with duct flexible connector and volume control damper. 800CFM
Supply, Installation, Testing & Commissioning of Exhaust Axial fan For Kitchen Ventilation Unit With DIDW Fresh Air Fans & Casing. Supply, Installation, Testing & Commissioning of 8900 CFM
Supply, Installation, Testing & Commissioning of Freshair Axial fan For Kitchen Ventilation Unit With DIDW Fresh Air Fans & Casing. Supply, Installation, Testing & Commissioning of 7000 CFM
Supply / Installation / Testing / BRICATED rectangular sheet metal ducts, as per specifications detailed in tender, made of Class VIII GI sheet as per SMACNA Standard for medium pressure air flow with MS angle / TDF flanges, supports, anchor fasteners, food grade gaskets and RTV sealant in accordance with the approved shop drawings. it is mandotary to use factory fabricated ducts for minimum 85% of the ducting system. Use of Site fabricated ducts should be restricted to only 'to suit' pieces. Cold rolled sheets continuous galvanized sheet steel with zinc coating as per class VIII confirming to IS:277-1962 (revised)(where ever specified) of LFQ (Lock Forming Quality) grade. Galvanizing shall be of 120gms/sq. m (Total coating on both sides) The fabrication of the ducting system for air-conditioning & Ventilation shall confirm to SMACNA-1995 standards ("HVAC Duct Construction Standards - Metal and Flexible - Second Edition - 1995"-SMACNA).Supply, Installation, Testing & Commissioning of G.I. ducting 22 G
Grills & Diffusers : Supply,installation,testing and commissionig of extruded aluminium powder coated linear 4"Grilles for Supply /Return grill without volume control dampers.
Supply,installation,testing and commissionig of extruded aluminium powder coated linear 6"Grilles for Supply /Return grill without volume control dampers.
Supply,installation,testing and commissionig of extruded aluminium powder coated linear 8"Grilles for Supply /Return grill without volume control dampers.
Supply,installation,testing and commissionig of Powder Coated Extruded Aluminium 1 slote diffuser Of Required Airflow Angles With Out VCD.
Supply,installation,testing and commissionig of Powder Coated Extruded Aluminium 2 slote diffuser Of Required Airflow Angles With Out VCD.
Supply,installation,testing and commissionig of Powder Coated Extruded Aluminium 3 slote diffuser Of Required Airflow Angles With Out VCD.
Supply / Installation / Testing / commissioning Of Fresh Air& Exhaust Air GI Duct Dampers with bird screen & Cowl Piece
Supply,installation,testing and commissionig of G. I. Dampers
Supply & Installation of the PVC Drain Piping complete with fittings, supports and insulated with 9 mm thick Nitrile Rubber Insulation 25 mm Dia/ or equivalent / as Directed by Engineer Incharge.
Supply & Installation of the PVC Drain Piping complete with fittings, supports and insulated with 9 mm thick Nitrile Rubber Insulation 32 mm Dia/ or equivalent / as Directed by Engineer Incharge.
Supply & Installation of the PVC Drain Piping complete with fittings, supports and insulated with 9 mm thick Nitrile Rubber Insulation 40 mm Dia/ or equivalent / as Directed by Engineer Incharge.
Supply & Installation of the PVC Drain Piping complete with fittings, supports and insulated with 9 mm thick Nitrile Rubber Insulation 50 mm Dia/ or equivalent / as Directed by Engineer Incharge.
Supplying and erecting elastomeric nitrile rubber tube type sleeves for coating and insulating on provided copper pipes having 13 mm thickness and inner diameter / sizes 6.4 mm for AC system
Supplying and erecting elastomeric nitrile rubber tube type sleeves for coating and insulating on provided copper pipes having 13 mm thickness and inner diameter / sizes 9.5 mm for AC system
Supplying and erecting elastomeric nitrile rubber tube type sleeves for coating and insulating on provided copper pipes having 13 mm thickness and inner diameter / sizes 12.7 mm for AC system
Supplying and erecting elastomeric nitrile rubber tube type sleeves for coating and insulating on provided copper pipes having 13 mm thickness and inner diameter / sizes 15.9 mm for AC system
Supplying and erecting elastomeric nitrile rubber tube type sleeves for coating and insulating on provided copper pipes having 13 mm thickness and inner diameter / sizes 19.1 mm for AC system
Supply,installation,testing and commissionig Centralize remote system for VRF system of hitachi make completed
Supply, installation, testing, commissioning of power Distribution panel with following specification. Panel made form 14 swg CRCA sheet, Free standing, floor mounted, front hinged, for indoor use, cubicle type, rear removable, underlined and removable bottom gland plates for incoming and outgoing connections, dust and vermin proof with TPN Alluminium bus bar, complete with internal wiring, ferrules name plates, powder coated, with complete interlock, gaskets, and following accessories. As Per single line diagram. HVAC LOAD PANEL
Supply, installation, testing, commissioning of power Distribution panel with following specification. Panel made form 14 swg CRCA sheet, Free standing, floor mounted, front hinged, for indoor use, cubicle type, rear removable, underlined and removable bottom gland plates for incoming and outgoing connections, dust and vermin proof with TPN Alluminium bus bar, complete with internal wiring, ferrules name plates, powder coated, with complete interlock, gaskets, and following accessories. As Per single line diagram. PHE LOAD PANEL.
Supply, installation, testing, commissioning of power Distribution panel with following specification. Panel made form 14 swg CRCA sheet, Free standing, floor mounted, front hinged, for indoor use, cubicle type, rear removable, underlined and removable bottom gland plates for incoming and outgoing connections, dust and vermin proof with TPN Alluminium bus bar, complete with internal wiring, ferrules name plates, powder coated, with complete interlock, gaskets, and following accessories. As Per single line diagram. UPS PANEL
Supplying and erecting ON LOAD automatic transfer switch 4 pole, 415V, 63A,50 Hz with enclosure, flexibility of neutral connection, line and load reversibility,changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging,connected with provided leads complete
ELECTRICAL WORKS- UPS & INVERTER BATTERY ACCESSORIES Supplying, Loading, Unloading, Installations,Testing , Commissioning of expandable moduler IGBT BASED 80KVA (20kva modules) UPS 3 PHASE INPUT & 3 PHASE OUTPUT with reversal protection, Nominal Voltage 415 V AC (3 Ph + N), +/- 15% Frequency 50 Hz, +/- 1%. Thd I <= 3% (at full load and Vthd<1%), Power Factor - 0.99 Inverter Bridge Space Vector Modulation & IGBT Technology Qty. Similer to DELTA make Modular UPS 80 kVA NH + frame 4 X 20 kVA power module with SNMP /Modbus Card.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of SMF battery set, Battery Bank Rack, and battery connecting accessories for 80 KVA incloding all terminals and enter battery cabling SMF batteries 12V 150Ah 40 Nos. SMF Batteries for 30 Mins Backup (72000VAH) / Quanta or Equivalent make.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 Pole MCCB 100/125 A of 35 kA SC rating, thermal and magnetic setting with provided leads on iron frame with Enclosure board as per specification For medical eq. I/c Incomeing and out going/UPS & INVERTER
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 Pole MCCB 160 / 200 A of 35 kA SC rating, thermal and magnetic setting with provided leads on iron frame with Enclosure board as per specification For medical eq. I/c Incomeing and out going UPS & INVERTER.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 Pole MCCB 250 A of 35 kA SC rating, thermal and magnetic setting with provided leads on iron frame with Enclosure board as per specification For medical eq. I/c Incomeing and out going.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 Pole MCCB 315/400 A of 35 kA SC rating, thermal and magnetic setting with provided leads on iron frame with Enclosure board as per specification For medical eq. I/c Incomeing and out going.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 6 WAY Incomer- 2 Outgoing- 4 IK 09-Horizontal SPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings. L&t, Schindler or equivalent
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 8 WAY Incomer- 2 Outgoing- 63 IK 09-Including Internal Wiring Horizontal SPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings L&t, Schindler or equivalent.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 12 WAY Incomer- 2 Outgoing-10 IK 09-Horizontal SPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings. L&t, Schindler or equivalent
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 WAY Incomer- 4 Outgoing- 4+4+4 IK 09-Horizontal TPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings. L&t, Schindler or equivalent
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 8 WAY Incomer- 8 Outgoing- 8+8+8 IK 09-Including Internal Wiring Horizontal TPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings L&t, Schindler or equivalent.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 12 WAY Incomer- 8 Outgoing-12+12+12 IK 09-Horizontal TPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings. L&t, Schindler or equivalent
ELECTRICAL WORKS- DISTRIBUTION BOARD AND MCB, RCCB, TPMCB, SPMCB ACCESSORIES WORK Supplying, Loading, Unloading, Installations,Testing , Commissioning of 4 WAY Incomer- 8 Outgoing- 4+4+4 IK 09-vertical TPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings. L&t, Schindler or equivalent
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 8 WAY Incomer- 8 Outgoing- 8+8+8 IK 09-Including Internal Wiring Vertical TPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings L&t, Schindler or equivalent.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of 12 WAY Incomer- 8 Outgoing-12+12+12 IK 09-Vertical TPN Distribution Board IP 43 - Metal Door for Single/double door DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cabel ties | blanking plates and circuit identification labels With provision for FP MCB/Isolator//RCCB/RCBO as incomer, DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings. L&t, Schindler or equivalent
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, alongwith standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti vibratring pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector/MSEB/MPCB/PWD as per specification, The engine filling of oil, diesel etc. whenever required upto handing over to User department. The DG set shall include all accessories items, protections, safety parameters, control Panel compatible with BMS (IP/BACNET/ ALL TYPE OF POTETIAL FREE CONTACTS/ MODBUS ETC.), base frame with anti-vibration mount pad, fuel tank of 8 Hour capacity(750Ltrs to 999 Ltrs Tank capacity) with indicator, fuel pipe with pump, residential type exhaust silencer, 2X12 volt 180 amp-hour battery complete with copper conductor battery leads of required length and socket/clamps including G.I. stands for battery with wooden base, adaptor box etc complete as required for a 400 KVA DG Set as per the manufacturer recommendations. 400 KVA DG Set as per CPCB II norms, including No Load and Full load testing at Factory Before dispatched at site. EXHAUST ROUTING TO ATMOSPHERE FROM ENGINE Exhaust system consisting of 10" ERW Pipe including bends, flanges & hardware etc.10" ERW Pipe including bends, flanges & hardware etc. r above exhaust pipe with 50 mm thk. Rockwool slab of 100 Kg/ M3 , wrapped with 24 gauge Aluminium sheet exhaust pipe with 50 mm thk. Rockwool slab of 100 Kg/ M3 , wrapped with 24 gauge Aluminium sheet exhaust pipe & silencer , with one coat of primer and 2 coats of Enamel Paint Insulation for silencer, 50mm thk. Rockwool Slab of 100 Kg/ m3 and wrapped with 24 gauge Aluminum sheet Notes :- 1) Supply of all Misc. materials, required to complete the installation on” Turnkey’’ basis are to be included in above offer.2)Required working Drawing for foundation to be furnished by Contractor. 3) Work excluded from the scope of supply under ‘’ EXCLUSIONS’’ in covering specification shall be carried out by others but as per D.G. Supplier’s instructions and supervision. 4) Charging of batteries is supposed to be included in quoted price./or equivalent / as Directed by Engineer Incharge.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Auto Mains Failure, Auto synchronizing, auto load shearing panel for 400 KVA 3 Nos D.G. SETSAs per specification. as Directed by Engineer Incharge.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 63A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 50A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 40A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 32A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 25A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 16A 4P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 16A 2P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 25A 2P MCB Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 40A 2P 100ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 32A 2P 100ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations / or equivalent / as Directed by Engineer Incharge.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 25A 2P 100ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating RCCBs 16A 2P 30ma RCCB Conforms to IEC 61008-1, EN 61008-1, IS 12640-1 Wide Range of Current Ratings - 16A to 100A Precise Sensitivities for variety of applications - from 10mA to 500mA 2P & 4P versions Suitable for Isolation 8 Protection Degree - IP 20 Availability of wide Range of Site Mountable Accessories Available in- Type AC : For standard AC installations.
Supplying, Loading, Unloading, Installations,Testing , Commissioning of Rating MCBs 6 TO 32A 1P 10KA Conforms to IS/IEC 60898-1, EN 60898-1, IEC 60898-1, EN 60947-2, IEC 60947-2 Wide Range of Current Ratings – 0.5A to 125A Short circuit Breaking Capacity 10kA (IEC 60898-1, EN 60898-1) 15kA (IEC 60947-2, EN 60947-2) - for 80A, 100A and 125A•
Supply And errecting Swicth board for light on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell push or Black of unit complete.
Supply And errecting Swicth board for light on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell Push or Blank of unit complete.
Supply And errecting Swicth board for light on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell Push or Blank of unit complete.
Supply And errecting Swicth board for light on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell Push or Blank of unit complete.
Supply And errecting Swicth board for light on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell Push or Blank of unit complete.
Supply And errecting Swicth board for light on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell Push or Blank of unit complete.
Supply And errecting Swicth board for light on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 12/16 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell Push or Blank of unit complete.
Supply And errecting Swicth board for light on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 18 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell Push or Blank of unit complete.
Supply And errecting Swicth board for Ceiling fan on wall, false ceilling and concealed in Wall, Panels, etc with modular type switch 6A / 10A S P, unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP using 3 x 1.5 Sq.mm. [P, N, E] Multistranded Copper Conductor, FRLS PVC inculated, 1100 V grade, Color Coded, ISI marked wires, & Accessories. The Point with Switch Board Light Points controlled by one 6A/10A S.P. Switch / bell Push With regulatort complete.
Supply and installationof switch board for UPS Plugs, with ISI mark 1.1 KV grade PVC insulated copper wire with 2.5 Sq.mm ISI mark PVC insulated copper wire in green color used for earthing in existing PVC conduit on the board complete with 3 Nos 5 pin 16A modular type socket and 1 No 16 Amp modular type Switch erected on original sheet metal / non metallic un-breakable box flush on wall / partation complete with double (mounting & cover) plate.
Supply and installationof switch board for Power Plug, on board with ISI mark 2-4 sq.mm 1.1 KV grade PVC insulated copper wire with 2.5 Sq.mm ISI mark PVC insulated copper wire in green color used for earthing in existing rigid PVC conduit on board for plug complete with 6 pin 6A & 16 A modular type socket and 16 Amp modular type Switch erected on original sheet metal / non metallic un-breakable box flush on wall with double (mounting & cover) plate.
Supply and installationof switch board for Telephone concealed type with existing telephone cable in existing concealed rigid PVC conduit for plug complete erected on original sheet metal / non metallic un-breakable box flush on wall with double ( mounting & cover ) plate. (Only Point)
Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above 2 x 1.5 Sq.mm. [P, N] Wires. + 1 x 1.5 Sq.mm. [E]
Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above 2 x 2.5 Sq.mm. [P, N] Wires. + 1 x 2.5 Sq.mm. [E]
Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above 2 x 4 Sq. mm. [P, N] Wires.+ 1 x 4 Sq.mm. [E]
Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above 4 x 4 Sq. mm. [R,Y,B, N] Wires.+ 1 x 4 Sq.mm. [E]
Supplying and erecting Multistranded Copper Conductor FRLS PVC insulated, Color Coded, 1100 V grade, ISI marked wires, to be laid in item above4 x 10 Sq. mm. [P, N] Wires.+ 1 x 10 Sq.mm. [E]
Supplying and erecting I.S.I. mark Rigid P.V.C. conduit 20 mm. dia. with necessary accessories 20mm H.G. PVC conduit, with accessories as Junction Boxes, Couplers, on ceiling, Wall, panels etc. for following. a) light board Submains b) 3P 6A Socket Switch computer Points c) 3P 6 / 16A Socket Switch Point d) Cat -6 Cable Point e) Telephone Cable Point. Etc.
Supplying and erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories 25mm H.G. PVC conduit, with accessories as Junction Boxes, Couplers, on ceiling, Wall, panels etc. for following. a) light board Submains b) 3P 6A Socket Switch computer Points c) 3P 6 / 16A Socket Switch Point d) Cat -6 Cable Point e) Telephone Cable Point. Etc.
Supplying and erecting I.S.I. mark Rigid P.V.C. conduit 32 mm. dia. with necessary accessories 32mm H.G. PVC conduit, with accessories as Junction Boxes, Couplers, on ceiling, Wall, panels etc. for following. a) light board Submains b) 3P 6A Socket Switch computer Points c) 3P 6 / 16A Socket Switch Point d) Cat -6 Cable Point e) Telephone Cable Point. Etc.
Supplying and erecting I.S.I. mark Flexible P.V.C. conduit 40 mm. dia. with necessary accessories 40mm H.G. PVC conduit, with accessories as Junction Boxes, Couplers, on ceiling, Wall, panels etc. for following. a) light board Submains b) 3P 6A Socket Switch computer Points c) 3P 6 / 16A Socket Switch Point d) Cat -6 Cable Point e) Telephone Cable Point. Etc.
Supplying and erecting I.S.I. mark Flexible P.V.C. conduit 50 mm. dia. with necessary accessories 50mm H.G. PVC conduit, with accessories as Junction Boxes, Couplers, on ceiling, Wall, panels etc. for following. a) light board Submains b) 3P 6A Socket Switch computer Points c) 3P 6 / 16A Socket Switch Point d) Cat -6 Cable Point e) Telephone Cable Point. Etc.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 3.5 C X 300 Sq. mm. A X F Y XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 3.5 C X 185 Sq. mm. A X F Y XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 3.5 C X 150 Sq. mm. A X F Y XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured copper Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 4 C X 16 Sq. mm. YWY XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Copper Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 4 C X 10 Sq. mm. YWY XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Copper Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 4 C X 6 Sq. mm. YWY XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Copper Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 4 C X 4 Sq. mm.YWY XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Copper Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 3.5 C X 35 Sq. mm. YWY XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Copper Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 3 C X 4 Sq. mm. YWY XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 4 C X 25 Sq. mm. A Y F Y XLPE
SITC of 1100 V grade XLPE insulated sheathed & steel armoured Aluminium Conductor cables. Unloading by crane, shifting to place of work and laid on walls / ceiling / ready made trench / Cable tray / Through underground RCC pipes / including spacers / saddles / clamps / G.I. Hardware as required, (M.S. cable trays supports / cable trays, RCC pipes covered by seperate items ) with Termination of cable using screwed flange type eliptical / conical, heavy duty brass glands, crimping sockets including 3.5 C X 95 Sq. mm. A Y F Y XLPE
Supplying & erecting single compression type brass cable glands for 4 core 10 Sq.mm
Supplying & erecting single compression type brass cable glands for 4 core 16 Sq.mm
Supplying & erecting single compression type brass cable glands for 4 core 25 Sq.mm.
Supplying & erecting single compression type brass cable glands for 4 core 35 Sq.mm.
Supplying & erecting single compression type brass cable glands for 3½ core 95 sq mm cable
Supplying & erecting single compression type brass cable glands for 3½ core 150 sq mm cable
Supplying & erecting Single Compression type brass cable glands for 3½core 185sq mm cable
Supplying & erecting Single Compression type brass cable glands for 3½core 240 sq mm cable
Supplying & erecting Single Compression type brass cable glands for 3½core 300 sq mm cable
Supplying & erecting crimping type aluminium lugs for cable 16 sq mm complete
Supplying & erecting crimping type aluminium lugs for cable 25 sq mm complete
Supplying & erecting crimping type aluminium lugs for cable 35 sq mm complete
Supplying & erecting crimping type aluminium lugs for cable 95 sq mm complete
Supplying & erecting crimping type aluminium lugs for cable 185 sq mm complete
Supplying & erecting crimping type aluminium lugs for cable 240 sq mm complete
Supplying & erecting crimping type aluminium lugs for cable 300 sq mm complete
Supplying & erecting crimping type Copper lugs for cable Upto 16 sq mm complete
Supplying & erecting crimping type Copper lugs for cable 25 sq mm complete
Supplying & erecting crimping type Copper lugs for cable 35 sq mm complete
Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete
Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete(8 SWG)
Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 500 x 75 mm.
Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 400 x 75 mm.
Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 300 x 100 mm.
Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 300 x 50/75 mm.
Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 200 x 50/75 mm.
Supplying and laying of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick), including couplers, G.I. Bolts, nusts, washers, necessary G.I. Hardware to be mounted on M.S fabricated supports (considered in separate item.) Sizes as follows 150 x 50/75 mm.
SITCof Hitech suspension Support G.I. 10 MM dia Therded Tie Rod for supporting of cable tray of any length with G.I Hardware,, install between Trusses G.I. Rail Channel Strip / Trusses welded clamp & supporting angle / GI Rail Channel strip below of cable tray. ( Supporting angle/ welded strip/ Rail Channel covered in sepreate item)
SITC of Hitech Support G.I. 2 MM Thick X 30 mm Width Rail Channel strip for supporting of cable tray of any length, install on Trusses & supporting of cable tray. ( Supporting Therded Rod & welded strip covered in sepreate item)
SITC of M.S fabricated supports for cable trays of M.S sections welded to structure / clamped to sturucture / wall, using anchor bolts where required including G.I. hardware & painting with Two coats of Red oxide primer & 2 coats of eamel paint of approved shade. (colour As per Ex. )
Supplying and erecting anodized aluminium mirror light LED fitting (2 feet) for toilet area Indirect lighting Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED.
Supply,Installation, testing & commissioning of following light fixtures complete with: a) All fixing accessories, mounting Brackets, anchor fasteners, suspension wires/chains etc. necessary for completeness of installation. b) Drivers / Controllers with housing. c) Lamp of specified wattage. d) Earthing of fittings. e) Diffuser shall lit up uniformly without any black spot on diffuser. f) Light fixture finishes should be as specified. g) Any visible power supply cable to light fixture shall be transperent. h) All suspended fixtures shall be provided with SS caps to put around suspension at flase ceiling level Note: 1) In addition to above mentioned accessories details, vendor to consider specific light fixture requirement mentioned along-with light fixture. 2) Light Fixtures final confirmation to be done by Architect and Lighting Consultant: MR 1.2M Long 25mm THIK Concealed Profile light with 30W PER METER LED STRIP LIGHT
Tube light- 4-FEET 48-WATT (DOUBLE) 6500K with wide angle Reflector
42 W LED DOWN LIGHT FITTING SURFACE MOUNTED / SUSPENSION MOUNTED
20 W TRACK LIGHT WITH COB LED & EXTRUDED ALUMINIUM HOUSING
SINGLE PHASE 1 MTR. TRACK FOR TRACK LIGHTS
38 W LED TYPE LIGHT FITTING SURFACE / SUSPENSION MOUNTED
32 W RECESSED MOUNTED LED TYPE LIGHT FITTING
4.0 W LED BATTEN TYPE LIGHT FITTING SUITABLE FOR SURFACE MOUNTIN
16 W BATTEN TYPE LED LIGHT FITTING
LED WALL WASH LIGHT FITTINGS
LED HANGING LIGHT FITTINGS
RGB FLOOR STRIP LIGHTS OF 300 mm. LENGTH WITH CONTROLLER
5 W LED STUDY TABLE LAMP
36W LED DOWNLIGHT
SITC of white Pop-Up box for Library area switch socket installation. The confirguration to consist of switch+socket complete in all respect, flushed with the table.
Providing and installing Nylon net for protection from Birds entry in Entrance Lobby.(Exterior Projection)
UST Lens MR Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge.Supply and installation of Ultra Short Throw Lens with specifications mentioned below and as per direction of Engineer-in-charge: Brand and Model Epson Ultra Short Throw Lens ELPLX02 Zoom Ratio 0 Throw Ratio (4.3) 0.35 Throw Ratio (16:10) 0.35 MR
LAN to HDMI Converter MR HDMI converters are devices that connect a non-HDMI source to an HDMI display. ... For example, the HDMI signal flows out of your DVD player and into your TV. MR
Live Action Shoot story 2 MR Undertake test Shoots and Experiments to deduce appropriate camera angles for the specific measurement requirements of the target environment ,Professional Services of the Director, Director of Photography, Camera Crew, Lighting Crew, Sound Recordist, and other sundry shoot crew totalling 40 crew members for mentioned days of shoot.Rent of Lighting Systems for Croma Lighting, subject lighting for camera, and Stage Lighting of the set, for mentioned days of shoot.Professional Services of the Visual Effects Supervisor for mentioned days of shoot MR
Writing the complete script story 2 MR .This refers to the forming of the story in written form,wherein the idea beind the installtion is visualised and thought of.The same script is then reffered for all cgi creation and further development . MR
Photorealistic Head Modelling story 2 MR Recreating Model Of The Personality Head in three dimension for it to be used in the process ahead. Three-dimensional (3D) models should represent a physical body using a collection of points in 3D space, connected by various geometric entities such as triangles, lines, curved surfaces, etc. Being a collection of data (points and other information), 3D models can be created by hand, algorithmically (procedural modeling), or scanned MR
. Photorealistic Head Texturing story 2 MR In this process you would need to create colours, paints and textures for the above model so that it is realistic, for which you will have to use a method called multi texturing. Multitexturing is the use of more than one texture at a time on a polygon. For instance, a light map texture may be used to light a surface as an alternative to recalculating that lighting every time the surface is rendered. Microtextures or detail textures will be needed to add higher frequency details, and dirt maps may add weathering and variation; this can greatly reduce the apparent periodicity of repeating textures. Modern graphics may use more than 10 layers, which are combined using shaders, for greater fidelity. Another multitexture technique is bump mapping, which allows a texture to directly control the facing direction of a surface for the purposes of its lighting calculations; it can give a very good appearance of a complex surface (such as tree bark or rough concrete) that takes on lighting detail in addition to the usual detailed coloring. MR
Rigging story 2 In this process you will be required to put digital joints and muscles so that the above model can be animated realisticlly. This technique is used by constructing a series of 'bones,' sometimes referred to as rigging. Each bone has a three-dimensional transformation from the default bind pose (which includes its position, scale and orientation), and an optional parent bone. The bones therefore form a hierarchy. The full transform of a child node is the product of its parent transform and its own transform. So moving a thigh-bone will move the lower leg too. As the character is animated, the bones change their transformation over time, under the influence of some animation controller. A rig is generally composed of both forward kinematics and inverse kinematics parts that may interact with each other. Skeletal animation is referring to the forward kinematics part of the rig, where a complete set of bone configurations identifies a unique pose.Each bone in the skeleton is associated with some portion of the character's visual representation in a process called skinning. In the most common case of a polygonal mesh character, the bone is associated with a group of vertices; for example, in a model of a human being, the 'thigh' bone would be associated with the vertices making up the polygons in the model's thigh. Portions of the character's skin can normally be associated with multiple bones, each one having a scaling factors called vertex weights, or blend weights. The movement of skin near the joints of two bones, can therefore be influenced by both bones. For a polygonal mesh, each vertex can have a blend weight for each bone. To calculate the final position of the vertex, a transformation matrix is created for each bone which, when applied to the vertex, first puts the vertex in bone space then puts it back into mesh space. After applying a matrix to the vertex, it is scaled by its corresponding weight. MR
Photorealistic Head Lighting story 2 In this Process you will need to match the lighting of the textured model to the shoot for it to look seamless. It refers to the simulation of light in computer graphics. This simulation can either be extremely accurate, as is the case in an application like Radiance which attempts to track the energy flow of light interacting with materials using radiosity computational techniques. Alternatively, the simulation can simply be inspired by light physics, as is the case with non-photorealistic rendering. In both cases, a shading model will be used to describe how surfaces respond to light. Between these two extremes, there are many different rendering approaches which can be employed to achieve almost any desired visual result. MR
Hologram Head Animation - 10 minutes :story 2 MR Computer animation is the process used for generating animated images. The more general term computer-generated imagery (CGI) encompasses both static scenes and dynamic images, while computer animation only refers to the moving images. Computer animation is essentially a digital successor to the stop motion techniques using 3D models, and traditional animation techniques using frame-by-frame animation of 2D illustrations. Computer-generated animations are more controllable than other more physically based processes, constructing miniatures for effects shots or hiring extras for crowd scenes, and because it allows the creation of images that would not be feasible using any other technology. It can also allow a single graphic artist to produce such content without the use of actors, expensive set pieces, or props. To create the illusion of movement, an image is displayed on the computer monitor and repeatedly replaced by a new image that is similar to it, but advanced slightly in time.
CGI Head Replacement on a Live Action Character and 3D Tracking ( 12 Minutes) MR This refers to the replacement of the actual human head with the one which is CGI created in a computer software with all the facial animations and lighting.The animated head is then places/tracked freme by frame over the moving human so as to completly overlap the actual head . MR
Hologram Visual FX / Holographic Imagery 12 minutes MR This refres to creating of various graphical/visual elements in tune with the script/storyboard of the desired intallation in order to enhance the visual story telling .This inolves creation of element in various softwares and then compiling into one visual element . MR
Creating and Editing the Sound Effects MR Combining (Mixing) the 4K Output Video, the dubbed voice track, the sound effects, and original music into a single Master Video for playback through the Holographic Projection System MR
Chroma Keying and Roto MR a photographic compositing technique based on the separation of colors in the original images especially : blue screen sense 1.rotoscoping is the technique of manually creating a matte for an element on a live-action plate so it may be composited over another background MR
4K Holographic Rendering MR This refers to the the image compilation of the composited output to form the final image/visual .The process invloves processeing of the various 4k element to be combined to form a single image. MR
Compositing MR It represents each media object in a composite as a separate layer within a timeline, each with its own time bounds, effects, and keyframes. All the layers are stacked, one above the next, in any desired order; and the bottom layer is usually rendered as a base in the resultant image, with each higher layer being progressively rendered on top of the previously composited of layers, moving upward until all layers have been rendered into the final composite. Layer-based compositing is very well suited for rapid 2D and limited 3D effects such as in motion graphics, but becomes awkward for more complex composites entailing a large number of layers. A partial solution to this is some programs' ability to view the composite-order of elements (such as images, effects, or other attributes) with a visual diagram called a flowchart to nest compositions, or "comps," directly into other compositions, thereby adding complexity to the render-order by first compositing layers in the beginning composition, then combining that resultant image with the layered images from the proceeding composition, and so on MR
Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR
Fabrication Design and 3D Visualisation MR This refers to creation of the physical inslation inside of a software program to visualise how its going to look in the real world before the actual onground production MR
Software Programming MR It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming will involve tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. The system splits the media in to two zones , low res for visualisation of the playback in the control room and 4K for the main holographic playback. Also gives turnkey playback system from the control unit. MR
Asset Integration MR asset integration refers to the compiling/placing/integration/optimsation of the various elements (graphics/cgi) needed to from the front end of the desired application/installation MR
Testing / Compilation It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test. Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR
Installation / Integration This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses (Hologram) MR
UI / UX This is design balance process it balances technical functionality and visual elements. this is to create a system that is is not only operational but also usable and adaptable to changing user needs.(Hologram) MR
Supply and installation of Projector with specifications mentioned below and as per direction of Engineer-in-charge.
Proejector Mount
Supply and installation of Computer Intel Core i7 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix or Simillar RAM 8GBx2 Hyperx Fury 3200MHz Storage 512GB NVME Display Adapter Gigabyte GeForce RTX 3060 Gaming OC 8GB GDDR6 Nework Adapter Gigabit Ethernet LAN 10/100/100
Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License)
Sensor
Sensor mount
Cables / Connectors for the Video on Lotus Pond Media Extension ( HDMI ) Power Cables Power Extention and Switches Network Cabling HDMI converter: 2
Speaker
Software Programming for Video on Pond: It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos.
Asset Integration for Interactive Lotus Pond
Testing / Compilation for Video on Interactive Pond: It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use.
Experience design
Storyboard design
Sound Design
3D Animation , VFX, Sound for Lotus pond
Rendering
Integration / Installation for Lotus Pond
Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix or Simillar RAM 8GB DDR4 Storage 250GB NVME Display Adapter Intel Graphics
Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License)
Supply and installation for Samsung 24" touch screen
Cables / Connectors for the Video onTransparent Display box Media Extension ( HDMI ) Power Cables Power Extention and Switches Network Cabling
Software Programming for Animal Kingdom:
Asset Integration for Kingdom
Testing / Compilation for Animal Kingdom:
Game design
Storyboard design
Sound Design
3D Animation , VFX, Sound for Animal Kingdom
Rendering
Integration / Installation for Video on Animal Kingdom
Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix or Simillar RAM 8GB DDR4 Storage 250GB NVME Display Adapter Intel Graphics
Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License)
Supply and installation of Projector with specifications mentioned below and as per direction of Engineer-in-charge.
Proejector Mount
Cables / Connectors for the Video on Projector Media Extension ( HDMI ) Power Cables Power Extention and Switches Network Cabling
Software Programming for Video on Led Wall : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos.
Asset Integration for Video on Led Wall
Testing / Compilation forVideo on Led Wall : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use.
Script design
Storyboard design
Sound Design
3D Animation , VFX, Sound for Video on Led Wall
Rendering
Integration / Installation for Video on Led Wall
Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix or Simillar RAM 8GB DDR4 Storage 250GB NVME Display Adapter Intel Graphics
Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License)
Supply and installation of Projector with specifications mentioned below and as per direction of Engineer-in-charge.
Proejector Mount
Supply and installation for Samsung 19" screen
Cables / Connectors for Auditrium Media Extension ( HDMI ) Power Cables Power Extention and Switches Network Cabling
Speaker
Supply and installation of Computer Intel Core i7 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix or Simillar RAM 8GBx2 Hyperx Fury 3200MHz Storage 512GB NVME Display Adapter Gigabyte GeForce RTX 3060 Gaming OC 8GB GDDR6 Nework Adapter Gigabit Ethernet LAN 10/100/100
Camera
Biamped, coaxial two-way point source loudspeaker with a single 12-15" LF driver and compression driver with 3" or better Voice coil. Frequency Range (-10dB) of 60Hz - 20kHz or better & long term Continuous Power Handling of 300W (Low frequency) and 45W for High Frequency driver or better. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 131 or better. It should have Horizontal dispersion pattern of 110º or better, vertical dispersion of the loudspeaker shall be 60 degrees or better. The loudspeaker shall be enclosed in a Baltic birch plywood enclosure with perforated steel grille.
Multipurpose subwoofer with a single 15" neodymium LF driver. Frequency Range (-10dB) of 35Hz - 130Hz or better & long term Continuous Power Handling of 500W or better. It should have an axial Sensitivity of > = 90dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of >=124db or better. The loudspeaker should have a nominal impedance of 8 ohm or more. The loudspeaker shall be enclosed in a Baltic birch plywood enclosure with perforated steel grille. Complete with installation as per the site requirement.
Active Portable loudspeaker system with 2 combo XLR-1/4'' inputs, 3.5 mm input, Bluetooth inputs and 1/4'' TRS line output with 11 hours of play time using the rechargeable lithium ion battery with Freq Response 62Hz - 17kHZ and 109dB peak SPL, 120 H x 50V Nominal coverage.
Gooseneck mic with mute button
Wireless Lapel mic
Wireless Handheld Mic set
Black anodized, table mic stands., EIC approved
Mixer for live stage mics as per the no. of mics
2 core 14 AWG/2.5 Sq mm, Twisted, unshielded Speaker cable with stranded annealed bare copper conductors, Semi-rigid PVC insulation, NEC CL3R, CEC CMG, RoHS compliant
2 core Twisted, shielded balanced Audio and control cable with 22AWG or better 7 strand annealed bare copper conductors, Semi-Rigid PVC insulation, Riser rated PVC jacket. UL 444, UL 13 CMR rated
Floor Box for Stage
Mic port connectivity boxes
Connectors like LAN, CAT 6Sheilded, RCA, XLR etc
12U Rack
MAIN CURTAIN: Providing & Fixing of Main Curtain in Hitech Velvet Cloth with lining cloth 50% gatherings Satin Border at bottom of 6" and 4” in two pieces (Centre Parting) size 38' x 17'.6'
MAIN CURTAIN FRILL : Providing &. Fixing of main .Curtain Frill in same cloth as main Curtain 50% gatherings & Golden Fringe at Bottom of the Frill size 38' x4'
WINGS: Providing &. Fixing of wings in Alluminium Box pipe 70mm X 40mm with two intermediate supports. Rollers to slide the wings. Providing of Alluminium channels to slide the wings. Fixing of Cloth on both sides. Rollers at bottom Sixe ( 16' X 4' )
MID & BACK CURTAIN : Providing & Fixing of Mid & Back Curtain in Fire Retardant casement cloth stretched Fat of size 30' x 16'. Fixed to electrical hoisting mechanism.
CYCLORAMA: Providing & Fixing of cyclorama in Bombay Dyeing cloth of size 30' x 16' stretched flat. Fixed to Electrical hoisting mechanism.
FRILLS: Providing & Fixing of Frills in Drill cloth with 50% gatherings fixed to Grid in 25mm G.I. Pipe suspended by wire rope Size ( 45' X 4')
LIGHT BARS : Providing & Fixing of Light bars in 40 mm G.I. Pipe (Dual Barrel) 'B' Class with Brackets. M.S. Tray for Electric wire.( Size 100mm X 50mm ) a) 30 Fts. 3 on stage
CENTRE PARTING MECHANISM : Providing & fixing of Centre Parting Mechanism fixed with 1 H.P. 3 Phase Motor Aluminum 'C Track, 3mm Steel wire rope, runners, M.S. Drum, Reduction Pulley Sets. Wooden Panel, M.S. Angle stand 500 x 50mm (Siemens) contactors, Push Button sets, limit switches, electric wire2.5 sq m.m 7 core as required, a. Main Curtain
ELECTRIC HOISTING MECHANISM : Providing & Fixing of hoisting Mechanism for- Light Bars ( 3 ), Cyclorama ( 1 ), Back Curtain ( 1 ) , Mid Curtain ( 1 ), Frills ( 3 ) FOH, with following details. a.) 2 H.P. 3 Phase motor (Navjyot make) b. ) Gear Box 40:1 (Elecon ) c.) 100mm Pulley Set with Bearings one way two way, three way, four way, five way d.) Guide Pulley sets e.) 6mm steel wire rope. Appox 400ft f.) 75mm x 50mm M.S. Stand g.) M.S. Drum 9" dia h.) Limit switches with Plate & Rods i.) Electric wire 2.5 sq.mm 8 core j.)Panel Board with siemens/L&T Contactors k.) Pedestal Bearing 2 Nos. l.) G.I. Pipe 25mm
PIPE GRID: Providing & Fixing of Pipe Grid to be suspended form ceiling in M.S. Flat of 40mm x 5mm. The grid to be provided G.I. Pipe of 50mm ' B' Class. M.S. ' C ' Channel of 75mm x 40mm on three sides. Painting etc complete. Size ( 38' x 30'
Providing and Fixing LED PAR 102as per design and drawing .etc complete
Providing and fixinf the LED sharpy lights as per desing and drawing .etc complete.
Providing and Fixing LED fresnsl spot light 200 w. as per drawing.etc complete.
Providing and fixing a LED Blinder 400 watt as per drawing etc .complete.
Providing and fixing a Four gold LED PAR FOH. As per desing etc. complete
LED profile light
LED follow light DMX
LED PAR RGBW
MINI perl board console AVO LIGHT CONSOL
Supply laying in pvc. Conduit 2 core XLR cable. Approx.
Supply fixing XLR or socket male &female 1 No with m.s.box
Supply,fixing splitter 8 way
SITC.of G.I.pipe earth electrode,backfil compound,chamber cover .
SITC.of main L.T.panel' 1 No 100 A 4 pole MCCB 25 ka 1 No 100 A TPN bus bar allu. 3 Nos 40 A 4 pole MCB 10 ka 6 Nos 20 A 2 pole RCBO 30 mA 39 Nos 10/16 A SPMCB 10 ka. 1 Set R.Y.B.Lamps,Volt meter, Ammeter,KWH meter floor monting type with stand below,top and bottom cable entries,powder coated paint,vermin proof,door lock,earth studs 2
Supply,fixing 16 A / 6 A socket Anchor brand with m.s.box. Section as per requirement etc complete.
Supply,fixing circuit wiring 3 Nos 2.5 sq mm. copper FRLSHS,ISI wires in rigid, PVC MMS,ISI. conduit. Approx.
Providing different types of books such as historical, mythological, educational, current affairs, general knowledge, dictionary, Balasaheb Thackerys journey and many types at Library area (1100 BOOKS)
Supplying and providing synthetic carpet of 450 gsm of approved colour with pesting on surface as per direction of engineer incharge complete
FRP design as per Architect and Vendor Specification / Design FRP with approved paint finish ,Providing,supplying and fixing of FRP Item -of required shape and size as per the specifications by the vendor and design provided by the architect .The cladding should withstand external pressure .with interlocking arrangements, with lifting eyebolts.And as per specifications mentioned in the Technical spectications and product features excluding GST\ children zone-pedu
FRP design as per Architect and Vendor Specification / Design FRP with approved paint finish ,Providing,supplying and fixing of FRP Item -of required shape and size as per the specifications by the vendor and design provided by the architect .The cladding should withstand external pressure .with interlocking arrangements, with lifting eyebolts.And as per specifications mentioned in the Technical spectications and product features excluding GST\-sounds of jungle tree
FRP design as per Architect and Vendor Specification / Design FRP with approved paint finish ,Providing,supplying and fixing of FRP Item -of required shape and size as per the specifications by the vendor and design provided by the architect .The cladding should withstand external pressure .with interlocking arrangements, with lifting eyebolts.And as per specifications mentioned in the Technical spectications and product features excluding GST\-Apollo Prop
FRP design as per Architect and Vendor Specification / Design FRP with approved paint finish ,Providing,supplying and fixing of FRP Item -of required shape and size as per the specifications by the vendor and design provided by the architect .The cladding should withstand external pressure .with interlocking arrangements, with lifting eyebolts.And as per specifications mentioned in the Technical spectications and product features excluding GST\-Astronaut costume
FRP design as per Architect and Vendor Specification / Design FRP with approved paint finish ,Providing,supplying and fixing of FRP Item -of required shape and size as per the specifications by the vendor and design provided by the architect .The cladding should withstand external pressure .with interlocking arrangements, with lifting eyebolts.And as per specifications mentioned in the Technical spectications and product features excluding GST\-solar system planets
Providing and Fixing brass work for the balasaheb Thackrey cut out & project Title letter box at main entry of structure.etc complete
K E INFRASTRUCTURE PVT LTD (BID ID -6344195)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid