REPAIR AND MAINTENANCE TO WOODEN, STEEL, PVC AND DOOR, WINDOW AND VENTILATORS AT ALBERT EKKA ENLCAVE, BATRA ENCLAVE, KAREN LINE, TUNSIA LINE, MINI LINE UNDER AGE B/R-I OF GE PANAGARH

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar fcings, dressed stone work and precast concrete and removing and rubbish off the premises (outside MD land) complete all as specified and as directed.

M & L for brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

All as per item No. 2 above but except bricks complete all as specified and as directed.

M&L for brick work with old size sub class ‘B’ bricks straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and as directed.

M & L Providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and as directed.

M&L for 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floors, pavings etc. complete all as specified and directed.

M & L for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth complete all as specified and as directed.

S&F 38 mm wide and 3 mm thick glass dividing strips as in flooring complete all as specified and as directed.

M&L 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing fair and even complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premisescomplete all as specified and as directed.

Dismantling of stone slub and tiles of any description or thickness in floor complete all as specified and as directed.

M&L for coloured non skid ceramic joint free tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with white /colour cement complete all as specified and as directed.

M & L glazed ceramic tiles 300 x 200 mm x 7 mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match brick or concrete surfaces complete all as specified and as directed.

M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors or skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cment to match complete all as specified and as directed.

M&L for coloured vitrified ceramic tiles (joint free) 10 mm thick (Square/Rectangular) area of each tile exceeding 0.36 sqm in floor area, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes and pointed in white or coloured cement to match complete all as specified and as directed.

M&L 10 mm thick rendring in cement mortar 1:4 for laying wall/dados finishes and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed and specified.

Material and labour for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm complete as per manufacturer instructions complete all as specified and as directed.

Material and labour for 10 mm thick Endura cement concrete tiles of size n.exc.0.16sqm, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg /sqm all as per manufacturer instructions complete all as specified and as directed.

M&L 20 mm thick black granite machine cut bedding and jointed with gray cement slurry including polishing and half round edges complete all as specified and as directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cementcomplete all as specified and as directed.

M&L for rendering 20 mm thick cement plaster in two coats (each coat 10 mm thick) on external surfaces of brick work in CM 1:4 and second coat to be applied with WPC and recrone polyster fibre including fair finished complete all as specified and as directed. (WPC & Recron polyster fibre will be measured and paid separately).

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 5 mm thick cement plaster in CM 1:3 on concrete surfaces as in ceiling, chhajja, shelves etc to match with existing surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L Preparation of new plastered surface of wall applying of two coats of cement base paint over a coat alkali resistant primer.

M&L Preparation of new plastered surface of wall applying two coar of OBD.over a coat of primer

M&L Preparation of old plastered surface of wall applying one coar of OBD.

M&L prepration of plastered surface of wall and applying one coat of 3mm thick wall putty all as specified and directed

M&L Preparation of new plastered surface of ceilling applying three coat white wash complete all as specified and as directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost ) complete all as specified and as directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n.exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost ) complete all as specified and as directed.

Taking down aluminium door exc 1.00 Sqm but not exc 2.00 each and refixing at same opening after repairing of shutter by using glass sheet and pre laminated partical board as direction of Engineer-in-Charge . (glass sheet and pre laminated partical board measurd and paid seprately.)

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and as directed.

S&F factory made 35 mm thick 2nd class Hard wood plain framed panelled shutters (three panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per ISI 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed.

S&F 2nd class hard wood 30mm thick glazed and skelton shutters, open rebated for window and ventelaters shutters and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (b), supplied and fitted to chowkhats complete all as specified and as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

M&L framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 complete all as specified and as directed.

S & F steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement as per specification and drawing complete all as specified and as directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F SS butt hinges 100 mm with stainless steel pin complete all as specified and as directed.

S&F aluminium anodised handle 100 mm size complete all as specified and as directed.

S&F aluminium tower bolts 150 mm long complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete all as specified and as directed.

S & F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and as directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and as directed.

S&F aluminium anodised handles, cast type,150mm long complete all as specified and as directed.

S&F MS Butt hings medium weight cold rolled 100mm size complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and as directed.

S & F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles exceeding 200 cu cm and n. exc. 500 cu. cm each complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.50 sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc. 0.50 sqm each pane complete all as specified and as directed.

S&F in repair MS.PVC caoted drapery rods of 25 mm dia of PVC coated in curtain rods complete all as specified and as directed.

S & F MS PVC sheeted/power coated bracket size 150mm made to shape suitable for holding curtain/drapery rod of 25mm bore fixed with PVC rawl plugs and MS steel screws complete all as directed by Engr-in-Charge and as per approved sample kept in AGE B/R 1 office for single/double rod system.

S & F for coloured conical end balls dia not less then 50mm and PVC coated made to shape suitable for fixing as end of curtain/dropery rods complete all as directed Engr-in-Charge and as per approved sample kept in AGE B/R 1 office.

Taking up or down steel tubing of 15 mm dia bore and connection including cleaning for refixing or removed to store complete all as specified and as directed.

Fixing only in steel tubing and connection 15 mm dia bore complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Taking up or down steel tubing of 20 mm dia bore and connection including cleaning for refixing or removed to store complete all as specified and as directed.

Fixing only in steel tubing and connection 20 mm dia bore complete all as specified and as directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and as directed.

S & F in repair sink with out drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410 mm x 330mm x 160mm complete all as specified and as directed.

S & F in repair PVC waste pipe 32mm dia, 01 meter long for wash basin and sink complete all as specified and as directed.

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unionscomplete all as specified and as directed.

S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and as directed.

S&F in repair 15 mm bore stop valve cast copper alloy fancy type, chromium plated with long sunk and cup (concealed type), screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (With brackets) complete all as specified and as directed. Make:- Hindware, Parryware, Commander (Slim Line).

Fixing only in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with brackets complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and as directed.

S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair vitreous china squatting pan of Orrisa pattern size 580 x 440mm white with integral foot rests including connection to trap and to flushing pipe, antisyphonage pipe ect complete including making good to existing floor / Tiles complete all as specified and as directed.(Make :- HINDWARE / Parryware)

S&F in repair Vitreous china Water closet (pedestal pattern) complete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and incl CP jet nozzle for EWC including connection to GI pipe line complete all as specified and as directed.

S&F PVC (SWR) P trap 110/110 mm bore all as spfd complete all as specified and as directed. Make : Supreme/ Finolex

Supply & Fix in repair CP health faucet with 1.50 mtr long tube & hook complete all as specified and as directed.

S&F in repair vitreous china wash basin white, flat back, size 550X400 mm including cutting for pinning in ends of brackets complete all as specified and as directed.

S&F in repair 15mm bore pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and as directed.

S&F in repair chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms) complete all as specified and as directed.

S & F in repair 15mm bore Brass CP Mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and as directed.

S & F for GI frame work seamless ceilling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall useing nylon sleeves and screws at 450 mm centre to centre/intermediate channel o.9 mm thick two equal flanges of 15 mm each and web of 45 mm seuspended from soffit at approx 900 mm C to C with GI cleat and steel expansion fasteners with and including cilling section ( not exc 1.2 m length ) of 0.55 mm thicknes having kurled web of 50 mm and flang of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457 mm C to C complete all as specified and as directed.

M&L non asbestos fibre cement building boards 4 mm thick fixed to celling flat including fixed in repair complete all as specified and as directed.

S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position including dismalting water tank exc 250 ltr but not exc 500 ltr all as specified in SSR Part I complete all as specified and as directed.

All as per item No 99 above but 1000 ltr capacity complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and as directed.

S&F Pre - Painted galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre - Painted galvanized aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) of any thickness including ridges, hips, valleys as in roof coverings complete all as specified and as directed.

M&L 6 mm thick asbestos cement corrugated or semi corrugated sheets in roof walls fixed with L type or J type or cranked hooks bolts complete all as specified and as directed.

All as item No 106 above but fixing only complete all as specified and as directed.

S&F for anodised aluminum frame of doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

Supply and fixed in repair aluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size, quality or description) from frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

All as per Item No. 111 above but exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M&L in repair for 9mm thick prelaminated particle board, interior grade, prelaminated both sides decorative choice lamination fixed with aluminum beading and gaskit to aluminum frame work complete all as specified and directed.

M&L for RCC M-20 Design Mix using 20 mm graded stone aggregates as in shelves/slabs supported on walls /beams complete all as specified and as directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No 115 but 6 to 8 mm dia complete all as specified and as directed.

Use & waste wooden form work (rough finished) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal/sloping), complete all as specified and as directed.

S&F in repair brass choromium plated tubular towel rail 20 mm dia with brackets complete all as specified and as directed.

S&F in repair Mild steel ordinary rat tail rod pattern springs including roller and roller plate of 300mm complete all as specified and as directed.

SCHEDULE OF CREDIT

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

CHANDRA CONSTRUCTION AND CO

subash chander bahl

M/S Dey Construction

M/S BHATTACHARJEE ENTERPRISE

Jaibalaji Enterprise

Anmol Yash S.D. Construction Pvt. Ltd.

rahul enterprise