Repairs to sunken floors roofs joinery sanitary fittings plastering internal water supply and certain other misc works at BTR in the area of AGE B/R II under GE (N) Ahmednagar

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided etc complete all as specified and directed by Engineer-in-Charge

Dismantling timber scantlings 40 Sqcm and over in section, in any position etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 10 mm thick on brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement including taking down cement mortar plaster on brick or stone walls, raking out joints, hacking for key etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surface of wall and apply two coats of OBD surface finished with roller finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for providing water proofing treatment on roofs, as per manufacturer's instructions and as specified after taking down/out as existing tarfelt at site etc complete all as specified and directed by Engineer-in-Charge:- (a) Rendering 10 mm thick in cement and sand mortar (1:3) by using 100% coarse sand on roof mixed with & including WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement. (b) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqm and allow to dry. (c) Applying and laying torch APP polymer modified bituminous membrane 3 mm thick with non woven polyester mat as reinforced weighing not less than 3 kg/sqm by thermo fusion process as per manufacturers specification including applying one coat of aluminum paint.

S&F in repairs roof tiles, Mangalore pattern, interlocking at side joints, laid dry including dismantling etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for 2nd class hard wood for clean swan battens at 25 cm centre to centre of size exc 5 & n exc 15 Sqcm etc including dismantling etc complete all as specified and directed by Engineer-in-Charge

M&L preparation surface of tiles or slate battens, any size and spacing and treated all over measured overall on one side only(spaces not deducted) and apply one coat of Creosote oil etc complete all as specified and directed by Engineer-in-Charge

M&L in repair pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

M&L in repair pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE including dismantling of plain steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

M & L in repair 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc including dismantling etc complete all as specified and directed by Engineer-in-Charge

Fixing only in repair 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc including dismantling etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Steel work in tubular trusses including special shaped washer etc complete all as specified and directed by Engineer-in-Charge conforming to I. S.1161-1979 grade St.-240

S&F in repair steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc complete all as specified and directed by Engineer-in-Charge as per Fe 410 -W (Gde- E- 250) quality- A

M & L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

M & L in repair pre-cast cement concrete solid blocks, exc. 10 cm in width type C-1 1:3:6 using 20 mm graded stone aggregates and setting in mortar 1:6 including demolition etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new plastered surfaces of wall and applying two coats for cement paint etc complete all as specified and directed by Engineer-in-Charge

M & L for moorum filling in floors or paving laid in layers n.exc. 15 cm thick spread leveled and rammed including watering etc complete all as specified and directed by Engineer-in-Charge

M & L for hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and leveled in layers n. exc. 15cm thick water and rammed etc complete all as specified and directed by Engineer-in-Charge

M&L for providing 75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour in repair 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

M&L for coloured glazed ceramic tiles digitally printed premium designer series of size exc 0.12 Sqm and n'exc 0.18 Sqm , 7-8 mm thick as approved by GE as in dado / skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed by Engineer-in-Charge

M&L for joint free / rectified anti skid ceramic coloured tiles SSR series Johnson/ FT series of orient bell or equivalent to make as specified in Particular Specification, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6 ) set and jointed with grey cement and pointed with white or coloured cement to match the shade of tile etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exc 0.06Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with grey cement and pointed with white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

M&L for Digitally printed paver tiles 300x 300x 10mm thick as approved by GE with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors, over and including screed bed 15mm thick in cement and sand mortar (1:4) surface finished even and fair etc complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed 15mm thick in cement and sand mortar (1:4) surface finished even and fair etc including dismantling etc complete all as specified and directed by Engineer-in-Charge

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over and including 15 mm thick backing coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L for 16mm to 18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round molding the edge including 10 mm thick backing coat in CM (1:3) jointing & pointing in white cement (1:2 ) using marble dust with admixture of pigment to match the shade of granite rubbing including dismantling etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old steel surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old plastered surface of wall and applying one coat of cement base paint etc complete all as specified and directed by Engineer-in-Charge

M & L for complete removal of existing treatment of wall and apply two coats of OBD over a layer of POP finish finished with roller finish including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old decorated surfaces of walls by brooming down and applying one coat of weather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces etc complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of old distempered and painted surfaces of walls and applying two coats of Luster (any tint) over a coat of primer etc complete all as specified and directed by Engineer-in-Charge

S&F in repair rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting including taking down old water tank etc complete all as specified and directed by Engineer-in-Charge

All as per item No. 39 (here-in-before) but 1000 ltr capacity

All as per item No. 39 (hre-in-before) but 2000 ltr capacity

Supplying and laying in repair 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying in repair 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 25 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia male Brass Threaded Adaptor (MTA/ MBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Female Brass Threaded Adaptor (FTA/ FBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Brass Elbow etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Brass Tee etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia male Brass Threaded Adaptor (MTA/ MBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Female Brass Threaded Adaptor (FTA/ FBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Elbow etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Elbow (3/4 X ½) etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Tee etc complete all as specified and directed by Engineer-in-Charge

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in cement and sand mortar (1:4). Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providing PCC (1:5:10) type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC (1:4:8) type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge Make : Super Thermo lay MT of STP / TEXSA / FosRoc Note : Work has to be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L in repairs for false ceiling with Vinyl faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metalized polyester foil backing with Vinyl covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturer's instructions / specification and including taking down/ out existing etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A(Oriental series) of MARC or equivalent make as mentioned in list of make in Appendix `C'

S&F in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1010 (Oriental series) of MARC or equivalent make as mentioned in list of make in Appendix `C'

S&F in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No C0471 (CHT) Indus series of Parryware or equivalent to list of makes mentioned in Appendix `C'

M&L for 2mm thick wall care putty etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed.Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 of Hindware

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap all as directed. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent in Hindware

Supply and fix PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed. Make :- Sleek essence series Of Hindware or Cat part No E8303 Of Parryware .

Material and labour for Vitrified ceramic tiles Full body vitrified tiles GVT series of Johnson or equivalent in makes specfified in PS ,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE in floor etc laid over and including roughning existing surface , making good the damaged surface, levelling, and fixing with cement based tile adhesive ( Make FOSROC, DR FIXIT) as per the manufecturer's instructions and pointed in white or coloured cement to match complete all as specified.

All as per Sl item No 5 above but in skirting including 10mm thick in cement and sand mortar (1:4) backing coat

Preparation of old surfaces of walls, washing down and applying one coat of Oil Bond Distemper (OBD)with roller finish at any height including scaffholding etc complete all as directed by Engineer-in-charge.

An amount of Rs 94,260.00 shall be deducted from BOQ on account of schedule of credit

M/s IBEX Engineers and Contractors

Arihant Construction

M/s.Abhay Kulkarni and Associates

MS. G.A. CONSTRUCTION

OM SAI ASSOCIATES

M/s. A P INFRA

M/s. Sagar Traders