GE 874/EWS-30/2021-22

Amount

B/R Portion

Excavation in post holes each not exceeding 0.5 cum getting out, returning, filling in, including spreading, leveling, watering and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surface in any soil, complete all as specified.

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in foundations filling and mass concrete complete all as specified.

Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Fe- 290 (Gde E-165) (cut toordinary lengths i.e. within20mm of the length indicated)

Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

10 to 15 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long complete all as specified and directed.

Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire stapples or steel pins etc. as directed and all as specified. (Each line wire to be measured)

Mild steel galvanised 3.14 mm dia chain link fencing including line wires any mesh, size of aperture hole 75mm x 75mm standards, rails, straining bolts, exc including provision of binding wires, complete all as specified.

Preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & including one coat of red oxide primer complete all as specified.

Preparation of new or previously untreated surfaces of steel of any description not otherwise described n. exc. 10cm in width or girth and applying two coats of synthetic enamel paint over & including one coat of red oxide primer complete all as specified.

Javeed And Co

M/S GHULAM NABI KHUROO AND CO

M/S SS SHAH WALI & CO

M/S M.S. BUILDERS

Bidder Name

M/S GHULAM NABI KHUROO AND CO

M/S M.S. BUILDERS

M/S SS SHAH WALI & CO

M/S Mohammad Saleem and Co

Javeed And Co