REPAIR OF WOODEN FURNITURE AT FURNITURE YARD OF JAIPUR MIL STN

Amount

Teapoy wooden (1.01 to 1.03) : Removing of old unserviceable following wooden part and S&F new part made out of 1st class hard wood (Teak wood), size, shape & design as shown on drg, including tightening the joints by pinning, screwing, nailing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No. FD-278,382)

Side rail

Front/back rail

Table 3'x2' with or without drawer (2.01 to 2.07): Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. (Drg No. FD-283, 284)

Front/rear rail

Side rail

Middle stiffeners

Side stiffeners

Bottom ply of drawers (commercial ply woods of size 550mm x 310mm x 6mm).

Side members of drawer

Table dining 4 x 3 (3.01 to 3.03): Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing complete all as specified in drg and directed by Engr-in-charge. (Drg No.FD/MAP-II/-03)

Front/back rail

Side rail

Table dining 6 person (4.01 to 4.03): Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing complete all as specified in drg and directed by Engr-in-charge. (Drg No.FD-239, 269, 273, FD/Map-II/03)

Front/back rail

Side rail

Table dining 8 person (5.01 to 5.03) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No.FD-239,FD-273,FD-376)

Front/back rail

Side rail

Table writing (6.01 to 6.06) : Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood ) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No.FD-249, 275)

Front/ back rail

Bottom base of box 18mm thick commercial particle board (ISI marked)

Back ply box 6mm thick commercial ply (ISI marked)

Front door 18mm pre-laminated particle board including knob and hinges piano type continuous.

Bottom of drawer 6mm thick commercial ply (ISI marked) of size 600mm x 450mm .

Table 3x3 (7.01 to 7.02) : Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No.FD-88M, 291)

Front/side rail

Table Peg (8.01 to 8.04) : Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No. FD-25, 277, 384, 236)

Front rail

Side rail

PVC Shoes (4 nos in one chair)

Table Centre(9.01 to 9.04) : Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No. FD-274, 134(M), 235,267,393)

Front/rear rail

Side rail

PVC Shoes (4 nos in one chair)

Chair WB (10.01 to 10.07) : Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No. FD-285)

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes (4 nos in one chair)

S&F Plywood 6 mm thick BWR grade ISI marked as per drg

Sofa Set (11.01 to 11.06) : Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No. FD-373,281)

Side planks of sofa seat

Bottom planks of sofa set

Handle of single seat

SOFA SETs . Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 40 density 530 mm x500 mm covered with best quality of tapestry cloth Make - Sleepwell/Kurlon or equivalent all as shown on drgs and as approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.150/Mtr

Removing of old unserviceable tapestry cloth from cushion of sofa set and S&F new tapestry cloth and stitched on cushion as shown on drawing.

Table Bed Side (12.01 to 12.02): Removing of following u/s part and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No.FD-248,FD-276)

Top/middle/bottom shelf

Sides pane including legs

Polishing description (for 13.01 to 13.15) : M&L for preparation of exposed wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polishing on the wooden part of following furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing

Teapoy wooden (Drg No.FD-278, 382)

Table 3'x2' with drawer (Drg No.FD-284)

Table 3'x2' without drawer (Drg No.FD-283)

Table dining 4’ x 3’. (Drg No.FD-273)

Table dining 6 person (Drg No FD-239, 269, 273, FD/Map-II/03)

Table dining 8 person (Drg No FD-239,FD-273,FD-376)

Table writing (Drg No FD-249, 275)

Table 3x3 wooden (Drg No FD-88M, 291)

Table Peg (Drg No FD-25, 277, 384, 236)

Table Centre (Drg No FD-274, 134(M), 235,267,393)

Chair WB without arms (Drg No FD-285 )

Table Bed Side wooden (Drg No FD-248,FD-276 )

Bed with plytop

Sofa set 5 seater. (Drg No FD-281, FD-373 )

Sofa set 4 seater. (FD-281, FD-373)

Replacement of TOP (14.01 to 14.09): Taking out unserviceable top from following Tables and S&F new top made out of 18mm thick pre laminated particle board exterior quality including 4mm thick teak wood edging al- around the top duly polished size shall be as shown on drg and as directed.

Teapoy wooden (FD-278, FD-382)

Table 3'x2' with or without drawer (FD-284)

Table dining 4’ x 3’. (FD-273)

Table dining 6 person (FD-239, 269, 273, FD/Map-II/03)

Table dining 8 person (FD-239,FD-273,FD-376)

Table writing (FD-249, FD-275)

Table 3x3 (FD-88M, FD-291)

Table Peg ( FD-25, 277, 384, 236)

Table Centre (FD-274, 134(M), 235,267,393)

S&F in repair ‘L’ type steel bracket of size 75mm x 75mm x 20mm of 04 mm thick fixed with screws complete all as required.

Schedule of Credit

AJAY TRADERS

F.M. KHAN SONS

B.S Constructions