KMC/DG(S_D)/BDPS/M-5/22-23

Amount

Dismantling the stator of the motor and heated up to permissible limit for removing the moisture and varnishing the stator winding allow drying fully for 5HP stator of the motor

Rewinding the stator of motor with insulation coated super enamel copper wire as per original gauge insulation laid in each slot completing winding binding with glass/ampere cloth and varni shed cloth( impregnated) 5 H.P D.O.L, 2 pole starter

Dismantling the worn out impeller of pump and re fixing the same new as per original sample made of brass casting suitable to the shaft of pump

Replacement of the worn out/defective EN-8 shaft of the pumps by fitting fixing of new one strictly as per original sample matching with new impeller and bearings

Supplying and fixing the packing to make the pumps leak proof

SSupplying and fixing the ball bearing on the shaft of motor as per original sample

Replacement of damaged pump casing by supply fitting and fixing of new one as per sample

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes 65 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes 50 mm

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iii) 65 mm dia

Mathor mazdoor required for cleaning the silt from overhead tanks and underground reservoir 15 nos/day X 5 days =75 nos

Green Construction

DEY CONSTRUCTION