Spl rpr Bldg N E-16, E-17, E-18, E-22, E-23 of TPTR Asc, provn of 21 Geysers for JCOs/ OR Md accn at 550 acre, 15 x Geysers JCO/ OR govt Md accn and single JCOs living accn of Fd Hosp and 10 x Geyser at JCO/ OR Md accn at manoj enclave GE (E) FZR

Amount

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

All as per item 02 above but using old bricks retrieved from srl item No 01 above including cleaning and removal of mortar from old bricks etc complete all as specified and directed.

M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed.

Demolition RCC Roofs, floors (other than ground floors), beams staircases, landing, facia, chajjas, and similar suspended work, complete all as specified and directed.

M&L for use & waste wooden form work (rough finished surfaces ) to sides & soffits of Chajjas, parapets & facia and similar work n. exc 200 mm thick, complete all as specified and directed.

M&L for RCC type B1, 1:2:4 (20 mm graded Stone agg) as in RCC Facia/ platfrom/ chajjas/Beams etc, complete all as specified and directed.

Mild steel TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips. complete all as specified and directed.

S&F mild steel TMT bars as in reinforcement 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length,bent to shape required including cranking, bending spirally for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & directed.

Material and labour for shotcreting average thickness 50 mm in RCC columns, beams and slab etc. with cement concrete M-25 design mix having minimum cement content of 350 Kg per Cum. Concrete having the specified minimun characterstic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregates of 6 mm maximum size in proportion as per design criteria and Hardener/ admixture) incl the cost of centering and shuttering at edges and corner etc as directed by Engineer-in-Charge incl chipping of unsound/week concrete mateial 50 mm average thickness from slabs, beams/ columns etc with mannual chiesels or standerd power driven percussion type machine incl tapering of all edges, make square shoulder of cavities incl cleaning the exposed concrete surface and reinforcement with wire brushes and throughly washing with water and allowing it to dry etc incl removal of rust by applying approved rust remover chemical and the coating with Dr Fixit Epoxy zinc primer @ 6 Sqm per Litre at DFT of 100 micron, applying the SBR Latex based bonding agent on each layer of the shootcreting work of Dr Fixit Pidicrete URP on the entire surface complete all as directed including pressure grouting with epoxy injection grout including 5 mm thick cement plaster in CM (1:3) finished even and smooth without using extra cement including removing rubbish material from building and thrown in low lying lying area at any distance upto 500 metres from the site complete as directed by Engineer-in-Charge. Contd...10.01/-

Make of chemical : Epoxy bonding agent, Rust remover, Anti corrosive coating, Epoxy grout, Hardener/ admixture shall be of Berger/ Sika/Fosroc/Pidilite or Techno commercial or equivalent make approved by GE. Notes : (i) Complete treatment to be executed by approved applicator (Applicator to be approved by GE). (ii) The Contractor and manufacture of shotcrete shall give the warranty before commencement and also for the strengths achieved in the post completion of work. (iii) The chemicals to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (iv) Hard drawn steel wire fabric will be measured and paid seperately.

Material and labour for applying bond coat of epoxy bonding agent & cement mortor in 1:1 ratio for bonding old and new concrete on damaged surfaces applying ready mix polymer modified mortar upto 60mm thickness (Chajjas fins, border,slab, beams etc) :- (i) Including application of rust remover on exposed reinforcement and subsequent application of anticorrosive coating. Also, pressure grouting with epoxy injection after application of polymer modified mortar. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repeat this step after 24 hrs as required. (iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as directed by Engineer-in-Charge. Contd...11.01/-

Make of Chemicals : - Epoxy bonding agent, Rust remover, Anti corrosive coating, Polymer modified mortar, Epoxy grout shall be of Berger, Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika or Equivalent as approved by GE. Notes : (i) Complete treatment to be executed by approved applicator (Applicator to be approved by GE). (ii) The Contractor and manufacture of polymer modified mortar shall give the warranty before commencement and also for the strengths achieved in the post completion of work. (iii) The chemicals to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (iv) Hard drawn steel wire fabric will be measured and paid seperately

Supply and fixing hard drawn steel wire fabric not exc 4 kg/sqm cut to lengths, wire mesh to be fixed and firmly anchored to the concrete surface by means of 'L' shaped mild steel shear key welded with existing reinforcement including cost of material, labour, tools and plants incl welding/L-clip/tying with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed.

Dismantling floor ,hearth or wall tiling including cement morter beddind (but not backing removing seviceable tiles to store and rubbish off the premises, complete all as specified and as directed

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles, complete all as specified and as directed.

M&L for Glazed ceramic tiles, coloured (colour as approved), of size 300x450x7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles, complete all as specified and as directed.

Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for Rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling, complete all as specified and as directed.

M&L for Preparation of new plastered wall surfaces and applying two coats of cement base paint over a white wash, complete all as specified and as directed.

Preparation of New surfaces of wall and applying Two coat of OBD on walls including corneces, pillars, complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash, complete all as specified and as directed.

M&L for Preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including preparation cornice and pillars by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots complete all as specified and directed.

M&L for washing rubbing down and stopping of emulsion painted surfaces and applying one coat of exterior weather proof acrylic paint of exterior grade including preparation of surfaces all as specified and directed

M & L PCC (1:2:4) type B-0 using 12.5mm graded stone agg as in roof kerbs or mud stops, bed blocks,benching, sunken or similar work etc including necessary form work complete all as specified & directed.

Dismantling of brick tiles or terracing tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and directed

Demolition mud in roofs, any thickness, including plastering and leeping etc complete all as specified and directed

M&L for rendering/screeding 10 mm thick cement plaster on roof surfaces in cement mortar (1:4) finished even and fair and using with water proofing compound complete all as specified and directed

M&L for water proofing treatment to sunken/roof surface including parapet wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions.

M&L for two coat of aluminium paint over APP membrane, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, complete all as specified and as directed.

All as per item No. 32 above herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each, complete all as specified and as directed.

Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm complete all as specified and as directed

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc, complete all as specified and as directed.

All as per item above here-in-before but size 125x60mm with double rebate, complete all as specified and as directed.

M&L for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified, complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-I using 20mm graded stone agg. as in bed block of hold fast coping incl. necessary form work, complete all as specified and as directed.

S&F for 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II, complete all as specified and as directed.

S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed

M&L in repair for Floor door stopper Overall length of cover plate 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S&F factory made double rebate box type side hung steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle with & without glazing bars, one side two shutters with glazing bars & other side glazed shutter with glazing bars including 8mm mild steel guard bars dovetailed or welded and with framed with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. Note Wiremesh & glass will be measured separtely.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 sheet 1/3 to 3/3.

S&F Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames, complete all as specified and as directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and as directed.

S&F Aluminium tower bolt of extruded section, 150 mm length of bolt and fixed with screws, complete all as specified and as directed.

S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws, complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws, complete all as specified and as directed.

S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia PVC coated approved pattern & design including side cups,rings @ 10 Nos per Rm & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over priming with a coat of red oxide, zinc chrome primer, complete all as specified and as directed.

M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.

M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on old surface of wall incl complete removal of existing surface, complete all as specified and as directed.

M&L for Complete removal of existing treatment including preparation of surfaces of walls & applying two coats of cement base paint, complete all as specified and as directed.

Demolition of un-reinforced cement concrete in any position, complete all as specified and as directed.

M&L for Cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in apron & floor in alternate bays, 150mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified & as directed by Engr-in-Charge.

M&L for forming 12mm thick expansion joints in 150mm thick concrete slab, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A', complete all as specified and as directed.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and as specified.

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004), complete all as specified and as directed.

S&F for PTMT tower bolts, 200 mm long and fixed with steel screws, complete all as specified and as directed.

S&F for PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and as directed.

S&F for PTMT handle 125mm long fixed with steel screws, complete all as specified and as directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed.

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings, complete all as specified and as directed.

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings, complete all as specified and as directed.

S&F 300mm Mild steel helical door spring including roller and roller plate, complete all as specified and as directed.

S&F Towel rail, 19mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as complete all as specified and as directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and as directed.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and as directed.

S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

S&F in repair stop cock 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe etc. complete all as specified and as directed.

S&F in repair Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

S&F in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) complete including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) but fixed in repair complete all as specified and as directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and as directed.

S&F Low density polyethylene (LDPE) pipes 32mm bore of pressure rating 6 kgf/sq. cm, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.

S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs, complete all as specified and as directed.

S&F in Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and as directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. (Make : Prince, Kissan, victus)

S&F 110mm bore, PVC (SWR) bends any radius, complete all as specified and as directed.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door, complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius, complete all as specified and as directed.

M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc, complete all as specified and as directed.

S&F 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, ccomplete all as specified and as directed.

Supply, fixing connecting and testing energy efficient (BEE 5 Star rated) electric water heater vertical storage type of 25 Ltrs capacity with stainless Steel inner tank, brass assembly, pressure release valve, heating element 1500/2000 W including all other accessories with high quality external finishes single phase with working Voltage 240 volts, 50 Hz, ISI marked complete all as specified and directed. Note: The cost of fixing of geysers including NRV,stud/ nuts/fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface is deemed to be included in the unit rate quoted.

Supply and fix Galvanised iron steel tubing medium grade of size 20mm complete including cutting of existing pipe line for jointing with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers,laid on wall and making good to the disturbed surface after making hole,complete all as specified and directed.

Supply and fix Galvanised iron steel tubing medium grade of size 15mm complete with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers ,laid on wall and making good to the disturbed surface after making hole,complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy fancy type, chromium plated screwed down, high pressure with crutch or butterfiy handle screwed both side for iron pipe 15 mm bore complete all as specified and directed.

Supbly and fixing PVC connection 15mm size with brass nuts of length 600 mm for Hot/cold water supply complete all as specified and directed.

Supply and fxing bib tap fancy type cast copper alloy with crutch or butterfly handle, screwed down with chromium plated for iron pipe 15mm dia complete all as specified and as directed.

Supply and fixng Sheet metal enclosure with socket plug Top and MCBs single pole and neutral enclosure with a two pin and eath plug socket complete with one single pole MCB of 20 Amp 'B Series capacity including fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface complete all as specified and directed.

Supply and fixing sub main wiring two Run of 4 sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 voll grade, drawn through and including PVC conduit medium duty including accessaries of 25mm size and fixed with PVC sadles and cadmium plated steel screws to the surfaces of the wall/ceiling including one run of 4 sqmm single core PVC insulated unsheathed copper eath continulty conductor complete all as specified and as directed. Notes: 1. Two runs of single core cable with one run of earth continuty conducto including PVC conduit and accessories shall be measured and paid as one unit. 2. The rate quotes against this item is deemed to be inclusive of making good the distrubed sufaces to match with the existing surfaces.

M/s Bansi Lal (BID ID -3506077)

Kissan contractor and engg works (BID ID -3506329)