Balance Work for the construction of NT PHC Domana ( Contract No. 15)

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed ( including lead, lift and carriage all complete)

Providing and laying cement concrete in kerbs, steps and 4.8 the like at or near ground level excluding the cost of centring, shuttering and finishing. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Crushed ( including lead, lift and carriage all complete)

Providin.9 and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) ( including lead, lift and carriage all complete)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) ( including lead, lift and carriage all complete)

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level ( including lead, lift and carriage all complete)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. ( including lead, lift and carriage all complete)

Centring and shuttermg including strutting, propping etc. and removal of form for

Foundations: footings, bases of columns etc. for mass concrete

V\lal!s (any thickness including attached pilasters, buttresses, plinth and string courses etc

Columns, Pillars, Piers, Abutments, Posts and Struts

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and centilevers.

Edges of slabs and breaks in floors and walls.Under 20cms wide

Edges of slabs and breaks in floors and walls.above 20cms wide

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1:3 ( 1 cement: 3 coarse sand) ( including lead, lift and carriage all complete)

Extra for half Brick masonry in superstructure above plinth level upto floor V level. ( including lead, lift and carriage all complete)

Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size ( including lead, lift and carriage all complete)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) ( including lead, lift and carriage all complete)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) ( including lead, lift and carriage all complete)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) ( including lead, lift and carriage all complete)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) ( including lead, lift and carriage all complete)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement prime

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 litre/1 Osqm over and including base coat of water proofing cement paint applied@ 2.20kg/10 sqm)

Providing and fixing stainless steel (grade 304) railing mode of hollow tubes channels plate etc including welding , grinding , buffing , polishing and making curvature (whereever requried ) and fitting. The same with necessary stainless steel nuts and bolts complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm ( including lead, lift and carriage all complete)

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 course sand) including pointing the joints with white cement and matching pigment etc., complete ( including lead, lift and carriage all complete)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete ( including lead, lift and carriage all complete)

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shape (Area of slab upto 0.5 sqm) 18mm thick ( including lead, lift and carriage all complete)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed. ( including lead, lift and carriage all complete)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 12. 5mm nominal size) Crushed ( including lead, lift and carriage all complete)

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand) ( including lead, lift and carriage all complete)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth ( including lead, lift and carriage all complete)

Providing and laying integral cement based water proofing treatment including prepration of surfaces as required for treatment of roofs, balconies, terracies etc consisting of following operations. a) applying a slurry coat of neat cement using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick jointless cement mortar of mix 1 :4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved byEngineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finially finishing the surface with trowel with neat cement slurrv and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm. ( including lead, lift and carriage all complete)

Providing gala 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase ( including lead, lift and carriage all complete)

Making khurras 45x45 em with average minimum thickness of 5 em cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. ( including lead, lift and carriage all complete)

Tile brick masonry work Scm thick with tile bricks of class designation 100 in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure ( including lead, lift and carriage all complete)

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished seamless type tubes

Construction of brick masonary manhole in cement mortal 1:4 foundation, concrete 1:4:8 mix inside plasters 12 mm thick with cement mortar 1:3 finished with floating coat of neat cement and channels in cement concrete 1:2:4 finsihed with floating coat of neat cement complete as per standard including PVC cover ( including lead, lift and carriage all complete)

Inside size 600 X 600 mm

Inside size 300 X 300 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement ( including lead, lift and carriage all complete)

Providing and fixing aluminium composit panel 4mm/3mm thick exterior grade with aluminium channel (Complete Job) ALSTONE make

Providing and fixing 8mm thick toughen glass in structural gazing with alminium frames (complete job)

Providing and fixing wall cladding size 4" X 10" of UNISTONE make

Providing and fixing PVC letters for nomination of Size (12" X 18") as per directions of site engineers

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 fine sand) ( including lead, lift and carriage all complete)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Providing and laying PVC Pipe of approved brand and manfacturer

150 mm dia

110 mm dia

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: INTERNAL WORK

15 mm dia. nominal bore medium

20 mm dia. nominal bore

Providing and supplying earthfilling on back of the wall including consolidating all complete

Providing and fixing powder coating aluminium work for doors, windows ventilaters and partitioned with extruded build up standard tabular / appropved Z Section and other section making, glazing panelling , fitting all complete including filling up of gaps (14 Gauze)

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous Chinawash basin size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers lSI marked

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception ,, of pipes and fittings

Providing and fixing kitchen sink with C. I. brackets, C.F'. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

Providing and fixing PVC Waste Pipe for sink or wash basin including PVC waste fitting complete 32 mm dia

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gm

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing Sanitary fitting / fixtures of approved brand like Jaguar, Cera or equivalent

CP Bib Cock long Nose

CIP Bib Cock Short Nose

CP Angle valve

PVC Connection

Wall Bend mixtures

Wash Besin Mixtures

Over head shower

Soap Dish

Seat Jet

ROMESH CHANDER

QAZI aftab

CHANDER MOHAN

RAVINDER KUMAR GOVT CONTRACTOR

Karan Singh

PACHNANDA GOURAV

M/s Shashi Sharma

Ghulam Mohammad Bhat