REPAIR TO WATCH TOWER AND GUARD POST IN TECH AREA AT AF STN SURATGARH.

BOQ (REPAIR TO WATCH TOWER, GUARD POST IN TECH AREA AT AF STN SURATGARH)

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish from the premises. complete all as specified and as directed.

M&L for 1 st quality Non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set & jointed in neat cement slurry and pointed in white cement and including bedding layer of 15mm thick in CM (1:6) complete all as specified & directed.

M&L for 1st qulaity Glazed ceramic tiles (400x400mm) x 7 to 8 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including bedding layer of 15mm thick in CM (1:6) complete all as specified & directed.

Ditto as item no 03 but in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile and including of 10mm thick screed in CM (1:4), complete all as specified and directed.

M&L 1st qulaity Coloured Glazed Ceramic Tiles 350X250X7 / 450x300x7mm thick in Vertical Surfaces i.e. Dado, set and jointed in Neat Cement Slurry and pointed in white cement, laid over and including Screed 10mm thick in CM 1:4, complete all as specified and as directed.

Demolition Stone Slabs of any description or thickness in Floors etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Granite (of any type) 20 mm thick machine cut,in window cills etc, bedded in 15 mm thick CM 1:4 and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L Granite (of any type) Tiles 20mm thick machine cut, in skirting laid over and including screed 10 mm thick CM 1:4 and jointed with grey cement slurry, and pointed with white cement including grinding and polishing complete all as specified and as directed.

M&L Machine cut Kota Stone Slab with Kota stone of min size 550x550 mm. 20-25 mm thick in Flooring, laid over 20mm thick Screed base in CM 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the stone including rubbing and polishing, complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings not exc 15cm thickness below or above ground level etc and removing rubbish form the premises complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B2 by using 20 mm graded cushed stone aggregate in surface channels and drains etc complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 ( 40mm graded stone aggregate) as in sub flooring/pavings and complete all as specified and directed by Engineer-in-Charge.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate), 75mm thick in Path/ Hardstanding in alternate Bay/Panel, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for 100 mm thick, PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate), as in sub base under floor , complete all as specified.

M&L Cement Concrete 1:3:6 (40 mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 2.50 metre interval and every change of direction, complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade conforming to IS 15658:2006 incl all amendments with approved colour, design & pattern as in footparth, light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, as directed .

Demolition of Brick work built in Cement mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in CM 1:6, complete all as specified and as directed.

M&L Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from demolition) including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in CM 1:6, complete all as specified and as directed.

Demolition of cement concrete reinforced in any positon and any desccription not otherwise specifically provided for and removing rubbish from the premises. complete all as specified and as directed by Engineer-in-Charge.

M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) Slabs supported on walls, beams, floors, roofs, Lintels and in shelves and the like,complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Rendering 15 mm thick, in CM 1:6 on Brick / Concrete Surfaces, Plastered Surfaces finished Even and fair , complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on Brick /Concrete Surfaces mixing with WPC as per Manufactures instruction, plastered surfaces finished Even and fair,complete all as specified and as directed. NOTE : WPC shall be Measured and Paid for as ‘Supply only’ separately under appropriate Item.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L Rendering 05 mm thick in CM 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and fair , complete all as specified and as directed.

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

M&L preparing new Plastered Surfaces of Walls by applying 1.5 mm thick Wall Care Putty including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.

M&L preparing newly Plastered Surfaces of Ceiling and applying Three Coats of white wash, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls by applying 1.5 mm thick exterior wall putty, rubbing to obtained a Smooth Surface, applying Two Coats of Exterior Emulsion Paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer shall be deemed to be included with following application as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint (Camouflage pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying Two Coat of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L for preparing old surfaces of walls by complete removal of existing treatment by sanding and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with rollers.complete all as specified and as directed.

M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of white wash, complete all as specified and as directed.

M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of white wash, complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as cooking platform, shelves, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat in fair finished surfaces of concrete all as directed by Engr in charge

M&L for TMT bars 10mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe 410-w or E-250 complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) white coloured, 03 layered hoisted and fixed in position all as specified in SSR part-I ,500 ltr capacity including,tank nipple, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed including dismantling/ lowering down U/s Water Storage Tanks ,complete all as specified and as directed.

Supply & laying as in replacment Steel Water Tubing 15mm bore, Galvanised, ‘medium grade’ with all Fittings,cutting and chasing, fixed on Walls, Ceiling or laid in Floors , complete as all specified and as directed.

Supply & laying as in replacement Steel Water Tubing 20mm bore, Galvanised, ‘medium grade’ with all Fittings,cutting and chasing, fixed on Walls, Ceiling or laid in Floors , complete as all specified and as directed.

S&F in repairs Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe , complete all as specified and as directed.

S&F in repairs stainless steel curtain rod 25mm dia(as approved) including fixing on stainless steel Bracket ,tightened with screw on both ends , complete all as specified and as directed.

S&F in repairs stainless steel Bracket (shaped as approved) not less than 80mm long to wall with screws, complete all as specified and as directed.

S&F in repairs CP plastic side dome(shaped as approved) secured with screws on curtain rod, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each and removing from site complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Sqm but not exc. 2.00 Sqm Each and removing from site complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each and removing from site complete all as specified and as directed.

S&F Factory made Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

S&F Factory made Pressed Steel Frame of size125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (12.5mm graded stone aggregate) as in Filling Back side of Chowkats, complete all as specified and as directed.

S&F 35mm thick factory made plain framed, panelled shutters of 2nd class hard wood (two panels) With lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated all as specified.

M&L Factory made Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles andPlain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Stainless Steel Hinges will be Measured and Paid under appropriate Item.

S&F Mild Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.

S&F Aluminium handle 125mm long Cast type, anodised, complete all as specified and as directed.

S&F Aluminium handle 150mm long Cast type, anodised, complete all as specified and as directed.

S&F Aluminium Barrel Tower Bolt 200mm long Extruded Section, complete all as specified and as directed.

S&F Aluminium Barrel Tower Bolt 150mm long Extruded Section, complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with harp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium and fixed,complete all as specified and as directed.

M&L Galvanised steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed

M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and Fixed-in-repairs, complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F Powder coated (50 Micron thick) aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Powder coated (50 Micron thick) double leaf aluminium window of galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.14mm along with aluminium section with 50 micron powder coated size of frame 125mm X 44.5 mm size of shutter, top, bottom and side rail 44.5mmx44.5x16mm gauge aluminium section with 50 micron anodizing and 5mm thick black/tinted sheet glass to be fixed on glazed portion and stainless steel hooks and eye to be provided as stay of shutter etc complete incl necessary jointing cleats, glazing clips, rubber packing attached aluminium snap beading, screws,aluminium grill, anodized aluminum fitting such as peg stay 150mm long(01 No. for each leaf) hinges type B-21 100mm long (02 Nos for each leaf) suitable handle (01 No for each leaf) and 100mm aluminium tower bolts (02 Nos in each leaf),brush weather strip,complete all as specified and directed.

M&L steel window box type using ERW ‘P’ Section comprising Double frame for Gauged and glazed skeleton shutter jointed internally with flat Iron 40x3mm complete including mild steel tower bolts, hinges, handle, Stops, lugs including GI steel wire cloth etc. all as directed. outer section of frame should be 50x25mm and Inner section should be 40x20mm, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double shutter with frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) guard bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item.

Hacking out old broken glass (any thickness, size, quality or description)from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane complete all as specified and as directed.

M&L for sheet glass 5.5mm thick, ordinary quality and glazing with rubber packing in squares exc 0.5 sq m in each pane complete all as specified and as directed.

M&L preparing New untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S&F as in repalcement Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets, complete all as specified and as directed.

S&F as in repalcement Brass Chromium Plated Mixer (Sink) 15mm bore (dia) for mixing hot and cold water including Flange suitable for wash hand basin ,complete all as specified and as directed.

S&F as in repalcement Sink with Drainage Board made of Stainless Steel 1.0mm thick Kitchen or Laboratory overall size 915x460mm having Bowl size 410x355x185 mm with Plugs, washers and Wastes, PVC Waste Pipe 40mm bore of suitable Length, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe, complete all as specified and as directed.

S&F in replacement Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, round head, screwed down, screwed for Iron Pipe or for Brass Ferrule , complete all as specified and as directed.

S&F in replacement Angle Valve (concealed type) 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe , complete all as specified and as directed.

S&F in replacement Brass Chromium Plated Mixer (WHB) 15mm bore (dia) for mixing hot and cold water including Flange suitable for wash hand basin ,complete all as specified and as directed.

S&F in replacement vitreous china wash hand basin 600x450mm in size, white (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, Making Good disturbed surfaces in CM 1:3 , complete all as specified and as directed.

S&F in replacement vitreous china white squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and as directed.

S&F in replacement PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC , complete all as specified and as directed.

M&L as in replacement PVC Flushing Cistern 10 Litre capacity white, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3. complete all as specified and as directed.

Dismantling structural steel or mild steel work of any description including including frame,truss, etc.,complete all as specified and as directed by Engineer-in-Charge.

S&F rolled Steel work in framing for cladding, glazing and the like fixed with angle cleats and connecting plates confroming to Fe410-W-(Grade E-250) quality 'A'. complete all as specified and as directed. Note :- All necessary precautions and safety measures shall be taken while execution of work.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,complete all as specified and as directed.

Dismantling of Plain or corrugated sheeting of any type , any gauge, thickness, roof coverings , complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile streangth of 550 Mpa as in roof covering\ cladding to wall , fixed with self tapping screws ,complete all as specified and as directed

S&F as in replacement Acrylic sheets 5.0mm thick as in window panes,completely transparent, complete all as specified and as directed.

Taking up or down PVC (SWR) Pipes any dia and bore (dia) with bends/ Connections, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with clamps , complete all as specified and as directed.

S&F PVC (SWR) 75mm bore, single socketed, in any length PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with clamps , complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.

Dismantling of bricks (laid flat or on edge) or brick tiles laid dry and pointed in any mortar in floors, over roof surfaces.complete all as specified and directed.

Demolition of mud in roofs any thickness and stripping out and taking down old existing tarfelt from any type of roof including plaster and removal from MOD land,complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in padding over roof slab laid to slope finished even and smooth, roof kerbs, rounded or chamfered on edges complete all as specified and directed.

Supplying and laying 1.5mm thick reinforced TPO membrane on the well cleaned and undulation free surface. The TPO membrane individual roll shall be laid over 300GSM geotextile laid over the prepared surface. All additional membranes shall then be laid with its overlaps of 50mm in longitudinal direction and side overlaps shall be minimum 100mm, fixed using hot air welding machine. Entire Surface area shall then be covered using Proofex Org or equivalent of other make in a similar manner including termination, sealing of earthing post and other ancilliaries proposed as per manufacturer methodology. The termination shall be done as per site requirement . Termination and membrane laying shall be done as per manufacturers approved methodology. Note:- (i) The waterproofing TPO membrane shall be BBA certified. (ii) Cleaning of Exisiting surface by suitable means and other contaminants manually to attain a fairly smooth and protusion free surface. Any protusions, shall be removed prior to laying of waterproofing membrane, Joints to be grouted should be clean and dust-free and remove the old tile grout before proceeding with new grouting. (iii) Termination of membrane on the parapet wall using a 1.5 mm thick, 25 mm wide aluminium strip fixed with suitable fasteners at 250 mm centres upto 300 mm parapet height and sealed using a PU sealant ( Nitoseal PU50 or equivalent of other makes), as per the manufacturer's instructions and the approved methodology.

M&L for Cutting into existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed by EIC.

M&L built in steel cup board (Godrej pattern) with pressed steel frame of size 75x45x1.25 mm thick with pressed steel shutter 1.00 mm fixed to masonry wall by hold fast made out of 25x3 mm thick flat iron incl MS hanging rod of 10mm dia with bracket fixed on inner side of cup board shutter and on other leaf provision of MS peg set of 03 including spray painting with synthetic enamel paint over one coat of red oxide primer all around steel surfaces of frame and shutter complete all as directed.

M&L for providing and fixing stainless steel (Grade 304) work made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor ,brick wk or the side of waist slab with suitable arrangement.complete all as specified and as directed.

M&L Aluminium Composite Panel 4.0mm thick (0.5mm PVDF coated Aluminium Skin on Top, 3.0mm thick Polyethylene Core and 0.5mm Aluminium Skin at Bottom finished as per Manufacturers Standard Finish) in Cladding of Approved Shade of required Profile to Brick/ Concrete Wall/ Mild Steel Frame, Canopy, Parapet, Coping, Bends, Pergola or any type Architectural Feathers wherever required/ ordered, either Segmental Curved or Straight in Plan wherever specified with extruded Aluminium Sections, Angle Cleats, Weather Sealants, Stainless Steel Screws, Rivets, Fasteners, Galvanised Brackets (Galvanising to be done conforming to IS:4759-1996 upto 610 GRAMS PER SQUARE METRE, 80-90 micron thickness), drilling and fixing the Cladding to either Masonry/ Reinforced Cement Concrete/ Mild Steel Structural Frame Work including providing and making grooves of required size, applying non staining Weather Selant, Backer Rod including all necessary Accessories, etc., complete all as specified and as directed.

M&L for plastic film upto 25 micron thick frosted/etched, reflective type ,Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high sticked to glass panes/ steel plates,including cutting letters & Insignia in the film as per instructions of manufactures,complete all as specified and as directed.

M&L for .63 mmMild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents.

Please Enable Macros to View BoQ information