Work for various types of Civil Works at 220kV Sub Station, BBMB, Kurukshetra

Amount

Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material & staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means) (Ref. Pb. CSR-2020, 8.39)

Dismantling concrete (a) Lime concrete, cement concrete of 1:6:12 or leaner mix (Ref. Pb. CSR-2020, 8.6 (a))

Dismantling concrete Cement concrete plain 1:2:4 mix (Ref. Pb. CSR-2020, 8.6 (d))

Earthwork in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (Ref. Pb. CSR-2020, 6.6)

Cement concrete 1:6:12 (a) With brick ballast 40mm gauge (i) mixing by manual means (Ref. Pb. CSR-2020, 10.8 (a) (i))

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth (Ref. Pb. CSR-2020, 11.5)

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded. (Ref. Pb. CSR-2020, 10.26)

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (Ref. Pb. CSR-2020, 11.8)

12.5 mm thick cement plaster 1:4 (Ref. Pb. CSR-2020, 15.9)

Cement pointing 1:2 deep variety (Ref. Pb. CSR-2020, 15.59)

Cement concrete 1:2:4 (a) With stone ballast or shingle (i) mixing by manual means (Ref. Pb. CSR-2020, 10.13 (a) (i))

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade (Ref. Pb. CSR-2020, 16.13)

White washing (two or more coat) (Ref. Pb. CSR-2020, 16.2)

Dismantling brick work tile, masonry or tile lining (b) In cement (Ref. Pb. CSR-2020, 8.5 (b))

Cement concrete 1:8:16 (a) With brick ballast 32mm / 40mm gauge (i) mixing by manual means (Ref. Pb. CSR-2020, 10.6 (a) (i))

Scraping (c) Cement plaster (Ref. Pb. CSR-2020, 8.31 (c))

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses inwalls when the wall is not to be dismantled. (Ref. Pb. CSR-2020, 8.26 (a) (b) & (c))

(a) Doors of area 3 sqm and below.

(b) Windows of area 3 sqm and below.

(c) Clerestory windows of area3sqmand below.

Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolt sand finished, fixed in position including the cost of cement concrete1:3:6for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. (a) Doors and windows frame of size 118mm x 60mm with 40mm wide single rebate weighing 3.43 kg per meter. (Ref. Pb. CSR-2020, 18.51 (a))

Providing and fixing 12 mm thick frame less toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge. (Ref. Pb. CSR-2020, 17.101 (TR))

Providing & fixing of knob set made of stainless steel body, having provision of latch and bolt, 3 nos key set, inside push lock model ETL-101A, Finish SS/PB/AB make-ENOX or any equivalent (Lock should be releasable from out side in case of emergency) as per requirement for unisex toilet for PwD complete as per specifications, Harmonised guidelines for PwD and as desired by engineer-in charge. (Ref. Pb. CSR-2020, 17.109)

Red meranti Normal Super (18 to19kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position (b) Battened and framed (ii) 45m thick taking size of door (Ref. Pb. CSR-2020, 17.10 (iii) (b) (ii))

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b) Glazing area above 0.09 sqm (iv) 8.0mm thick Plate glass(weight not less than 20 kg/ sqm) (Ref. Pb. CSR-2020, 17.26 (b) (iv)

The Shri Guru Gorakh Nath Co Op L&C Society (BID ID -957314)

Ram Construction Co. (BID ID -955635)