Renovation of Old Envorimental chemical lab at AMPRI,Bhopal

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.7.1 Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form work for :Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form work for : Suspended floors, roofs, landings, balconies and access

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more

Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 110 MM Bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

12 mm cement plaster of mix :1:4 (1 cement: 4 sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.and colour. Two or more coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent designmix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7.6 50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.---- 18.8.4 32 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank

Half Brick work with chimny brick of in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand). Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing Labour for shifting, manual and other misclanious works as directed by E-in-C. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing of ISLAND Bench for working table with Granite of average thickness 16mm over Marble stone of size approx 1.60x 6.10M (approx) on plan and 0.80 high. Vertical wall of the cabinet will be of pink marble. On top of this 15mm thickness atleaset marble will be placed and over it Granite will be placed.The edges of plateform will be moulded in required shape.The back side of wall of the modular section surfrace will be of digital printed 600x450 tiles or as per site requirement up to hight of 60 cm above plateform . Below the plateform vitrified tiles of size 600x600 be fixed in wall by suitable cement mortar or adhesive as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing of cabinet with Granite average thickness 16mmover Marble stone of size approx 1x 3.5M (approx) on plan and 0.80 high. Vertical wall of the cabinet will be of pink marble. On top of this 15mm thickness atleaset marble will be placed and over it Granite will be placed.The edges of plateform will be moulded in required shape.The back side of wall of the modular section surfrace will be of digital printed 600x450 tiles or as per site requirement up to hight of 60 cm above plateform . Below the plateform vitrified tiles of size 600x600 be fixed in wall by suitable cement mortar or adhesive as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing of cabinet with Granite average thickness 16mm over Marble stone of size approx 1x 6.5M (approx) on plan and 0.80 high leaving space for doors 1.2M. Vertical wall of the cabinet will be of pink marble. On top of this 15mm thickness atleaset marble will be placed and over it Granite will be placed.The edges of plateform will be moulded in required shape.The back side of wall of the modular section surfrace will be of digital printed 600x450 tiles or as per site requirement up to hight of 60 cm above plateform . Below the plateform vitrified tiles of size 600x600 be fixed in wall by suitable cement mortar or adhesive as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing of L-Shape Wall Bench for working table with Granite average thickness 16mm average thickness 16mmover Marble stone of size approx 1.60x 6.10M (approx) on plan and 0.80 high. Vertical wall of the cabinet will be of pink marble. On top of this 15mm thickness atleaset marble will be placed and over it Granite will be placed.The edges of plateform will be moulded in required shape.The back side of wall of the modular section surfrace will be of digital printed 600x450 tiles or as per site requirement up to hight of 60 cm above plateform . Below the plateform vitrified tiles of size 600x600 be fixed in wall by suitable cement mortar or adhesive as required as per site requirement and instruction and decision of E-in-c.

Providing and fixing under cabinet in exiting structure of size approx 1.60x 6.10M (approx) on plan and 0.80 high.with dravers of required size of basket/ drawers/ door with channels and other fittings handles locks, hinges etc. as needed and plyboard and mica on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing under cabinet in exiting structuresize approx 1x 3.5M (approx) on plan and 0.80 high with dravers of required size of basket/ drawers/ door with channels and other fittings handles locks, hinges etc. as needed and plyboard and mica on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing under cabinet in exiting structuresize size approx 1x 6.5M (approx) on plan and 0.80 high with dravers of required size of basket/ drawers/ door with channels and other fittings handles locks, hinges etc. as needed and plyboard and mica on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing under cabinet in exiting structuresize size size approx 1.60x 6.10M (approx) on plan and 0.80 high. with dravers of required size of basket/ drawers/ door with channels and other fittings handles locks, hinges etc. as needed and plyboard and mica on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Making Chowkhat of granite slab 18mm thick equivant to width of wall 20 cm thick with central patam to hold vertical and horizontal sills. The work will include cutting and fixing hold fasterns use of areldite or equivalent compound to fix slab one over other moulding the edges in desired shape making holes for al-drop and other desire work to hold a bifold fold door as per site requirement.Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing 12mm thick Toughned glass incluidng making holes , cutout and suitable conectors of S.S. 12mm TF Glass Hole T.F. Cutout T.F ICGC-4 (4MM W TO G CONNECTOR) DORMA/ ICON/ HAFFELE, ICPE-1 (BIG L PATCH) - DORMA/ICON/HAFFELE, ICPF 610 ( SMALL PATCH) - DORMA/ ICON/HAFFELE, ICGC-5 (G TO G 180* CONNECTOR)- DORMA/ ICON/HAFFELE, Floor spring ICFH-8600 (FLOOR SPRING) - DORMA/ ICON/HAFFELE, ICGH-1 (32X600MM ) h-HANDLE-DORMA/ICON/HAFFELE) DOOR LOCK -( DORMA/ICON/HAFFELE) Approximate area of toughned glass 12mm thick is 800 sqm and includes door, openable Bifold windows and Bifold doors alongwith cabin partitions. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Fixing blockboard multilayer plyboard doors MR grade 30 mm thickwith 1mm mica on front sides and balancing lamination 0.75mm in backside in required colour and design, along with necessary fittings like aldrop, butt hinges, towerbolts, door closer and other fittings as required to make door fully functional.Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing square tublar section S.S. 1.5" including fabrication finishing and making smooth for supporting glass of 12mm thickness of required size for making cabins / windows of size 3.4x3.4M as per site requirement. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing square tublar section S.S. 1.5" including fabrication finishing and making smooth for supporting glass of 12mm thickness of required size for making cabins / windows of size 3.4x6.5 M as per site requirement.Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Removing dry or oil bound distemper, oil paint water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing Laboratory sink Glazed Ciramic in Granite plateform including cutting making suitable opening and fixing by suitable means as per instruction and direction of E-in-charge. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing projection system of size 54 x 37x11 cm, 6000L UST HDR 10 model LT 002 vava make to remove chemical fumes etc. with ducting etc.as per site condition.Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing fume hood with blower scaffolding and underneath storage shelf, dimension of fume hood (LxDxH): 1200mm x 940mmx2250mm Exterior construction : complete SS Interior construction : chemical and heat resistance, smooth finish, easily cleanable panels made out of fiber reinforced plastic (FRP), worktop: black grainte sash: 5mm thick transparent with vertical rising counter, acid storage shelf (complete SS): 1 flammable liquid storage shelf (complete SS):1 Drawers:2 watertap:1 watersink:1 Gas tap: 2 (N2 and Ar) vacuum: 1 flurescence light : 1 15amp electrical points: 3 blower: 3.0 HP, 3-phase electrical motor Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing on wall face unplasticised Chemical resistant pipes including jointing with seal ring leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 6 Inch diameter(6 kg per cm) Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing on wall face unplasticised Chemical resistant pipes including jointing with seal ring leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 4 Inch diameter (6 kg per cm). Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

BARKAT ALI KHAN

MAITRI ENTERPRISES