Maintenance and Repairs to Buildings, Septic tank, Retaining wall, drains and other Related works

Amount

Demolition and dismantling to existing RR drain, footpath etc.,

Dismantling of tiles batten for tiles exc 15cm spacing

Removing building materials etc. to distance of 100 mtr or under beyond the lead included in the rates including loading unloading and stacking at the distenation

Surface Excavation n. exc. 30cm deep & avg 15 cm deep & getting out in hard dense soil.

Excavating over areas, n .exc 1.50 m depth and getting out in hard dense soil

Rough earth work excavation in ordinary soil up to a depth 1.5 mtr. From the starting point

Rough earth work excavation in ordinary soil up to a depth 1.5-3.0 mtr. From the starting point

Rough earth work excavation in ordinary soil up to a depth 3-4.5 mtr. From the starting point

Excavating in trenches n .exc 1.50 m depth and getting out in hard dense soil

P.c.c. with cement mortar 1:4:8,using 40mm graded metal.

R.c.c. footing with cement mortar 1:2:4,using 20mm graded stone aggregate as in foundation

R.c.c. wall with cement mortar 1:2:4,using 20mm graded stone aggregate as in walls, plinth beam, lintel, sunshade, roof slab etc and above.

Rendering 10 mm thick on other than fair faces of brick work in cement mortar 1:6 finished even and smooth W/o using extra cement

Ceiling plastering with cement moratr 1:4,15mm

White washing on wall surface three coats including preparation of surface

M&L for rendering in c.m.1:3, 15mm thick on fair faces of brick work or concrete surface finished even fair Sqm

R.C.C. 1:2:4,20mm graded stone aggregate in footings foundation beams etc. Complete.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hopping ends and binding with and including MS wire not less than 0.9mm dia.

Brickwork with subclass‘B’ bricks, straight or curved on plan to any radius in half brick thickwalls built in Cm 1:4

Form work sides of concrete surfaces in walls

Form work sides of concrete surfaces in foundation footings

Pre-painted galvalume aluminiyum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Aniodised aluminioum door shutters, aluminium section weighinh 0.55 kg/m including necessray joinining cleats glazing clips ruber neoprene packing handles 2 nos inch door, hinges anodised aluminium snap beadinghs, screws etc., complete all as specified

Heat absorbing glass, any size with solar control flim 50 micron reflective type sticked to glass panels as per instructions of manufactures and thickness of glass is 6mm thick

Steel work in tubular trusses including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to ISI1161-1979 st 240

S&F rolled MS framed work as in doors or gates of angel or other sections with and including hooks and hinges or steel hanging door fittings

Supplying and fixing steel doors & windows complete including protection type hings etc.with glazing bar

Supplying and fixing 75mm dia pvc pipe laid in trenches or in floors

Returning ,filling in spreading , levelling , wateringand well ramming watering etc. Complete.

Removing excavated materials n.exc. 50mtr and deposited where directed at level n.exc.1.5mtr above the starting point

Glazed ceramic tiles(300x200mm) 7mm thick in colour wall tiles including 10mm thick backing coats with CM 1:4

Synthetic enamel painting 2 coats on steel doors over one coat of red oxide

Exterior one coat of Brila White Cement and one coat of primer and two coats of exterior emulsion with wall prepatory

Brila White cement on wall surface one coats primer and two coats of interior emulsion including preparation of surface

Wiring with copper conductor cables one light point or fan point controlled by one switch with cables 1.5 sq mm size

M&L for pressed steel terminal boxes 150x75x60mm deep for mounting, switches, sockets, fan regulator, etc. with 3mm thick plastic animated sheet cover

S&F CFL light fitting, 1x9 w bulk head luminaries, with lamp holders, etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50HZ

CFL Bulb

Bulk head-1 nos

320 Wire - 20 RM

Wooden box-1