Construction of Physically challegened person toilets in Goverment higher primary school in sudambi Gp

PÀ£ÁðlPÀ ¸ÀPÁðgÀ

f¯Áè ¥ÀAZÁAiÀÄvÀ, ºÁªÉÃj

¥ÀAZÁAiÀÄvÀ gÁeï EAf¤ÃAiÀÄjAUï «¨sÁUÀ, ºÁªÉÃj

¥ÀAZÁAiÀÄvÀ gÁeï EAf¤ÃAiÀÄjAUï G¥À «¨sÁUÀ, ¨ÁåqÀV

PÁªÀÄUÁjAiÀÄ ºÉ¸ÀgÀÄ :- ¨ÁåqÀV vÁ®ÆQ£À ¸ÀÆqÀA© UÁæªÀÄ ¥ÀAZÁAiÀÄvï ªÁå¦ÛAiÀÄ ¸ÀÆqÀA© UÁæªÀÄzÀ ¸ÀPÁðj »jAiÀÄ ¥ÁæxÀ«ÄPÀ ±Á¯ÉAiÀÄ°è CAUÀ«PÀ® ¸Éßû ±ËZÁ®AiÀÄ ¤ªÀiÁðt

CAzÁdÄ ªÉÆvÀÛ :- 111541/-

¯ÉPÀÌ ²Ã¶ðPÉ :- 2022-23 £Éà ¸Á°£À 15 £Éà ºÀtPÁ¸ÀÄ AiÉÆÃd£É

NAME OF WORK :- ¨ÁåqÀV vÁ®ÆQ£À ¸ÀÆqÀA© UÁæªÀÄ ¥ÀAZÁAiÀÄvï ªÁå¦ÛAiÀÄ ¸ÀÆqÀA© UÁæªÀÄzÀ ¸ÀPÁðj »jAiÀÄ ¥ÁæxÀ«ÄPÀ ±Á¯ÉAiÀÄ°è CAUÀ«PÀ® ¸Éßû ±ËZÁ®AiÀÄ ¤ªÀiÁðt

Division : P.R.E. Division Haveri

Sub Division : P.R.E. Sub Division Byadgi

Head of Account : 2022-23 £Éà ¸Á°£À 15 £Éà ºÀtPÁ¸ÀÄ AiÉÆÃd£É

This estimate prepared in the office of the Assistant Executive Engineer, P.R.E Sub Division, Byadgi.

Estimated Cost :- Rs. 111541/-

Estimated prepared by : Y.K.METAGAR

Estimate Cheked by :

¨ÁåqÀV vÁ®ÆQ£À ©¸À®ºÀ½î UÁæªÀÄzÀ D¹Û £ÀA 10/1 gÀ°è UÀæAxÁ®AiÀÄPÉÌ «ÄøÀ°lÖ UáæªÀÄ ¥ÀAZÁAiÀÄvï ¨É樀 eÁUÀzÀ°è £ÀÆvÀ£À UáæªÀÄ ¥ÀAZÁAiÀÄvï UÀæAxÁ®AiÀÄ ªÀÄvÀÄÛ CjªÀÅ PÉÃAzÀæzÀ PÀlÖqÀ ¤ªÀiÁðt ªÀiÁqÀĪÀÅzÀÄ ªÀiÁqÀĪÀÅzÀÄ 2025-26 £Éà ¸Á°£À vÁ®ÆPÀ ¥ÀAZÁAiÀÄvï C¤¨sÀðA¢vÀ C£ÀÄzÁ£À gÀÆ.12.00/-PÉÌ ªÀÄAdÆgÁVzÀÄÝÉ ,¸ÀzÀj PÁªÀÄUÁjUÉ ¨ÉÃPÁzÀ CªÀ±Àå«gÀĪÀ CA±ÀUÀ¼À£ÀÄß C¼ÀªÀr¹ CAzÁdÄ ¥ÀnÖ vÀAiÀiÁj¹ ªÀÄÄA¢£À CUÀvÀå PÀæªÀÄPÉÌ ¸À°è¹zÉ.

Section Officer Assistant Executive Engineer

PRE Sub Division, Byadgi PRE Sub Division, Byadgi

2017-18¹ÙÓ ÊÑŹРÊБÑþ§ »Ûõ®°Ð ÆÑÄÑ ‘Ù֬Я ºÀЦÑþ± ‘ÑÀÐԖѧ–Ù ÀÐԁ¡Ö¤Ñ·Ð ƒ¹ÐԷѹÐ

Name of Work :- ¨ÁåqÀV vÁ®ÆQ£À ¸ÀÆqÀA© UÁæªÀÄ ¥ÀAZÁAiÀÄvï ªÁå¦ÛAiÀÄ ¸ÀÆqÀA© UÁæªÀÄzÀ ¸ÀPÁðj »jAiÀÄ ¥ÁæxÀ«ÄPÀ ±Á¯ÉAiÀÄ°è CAUÀ«PÀ® ¸Éßû ±ËZÁ®AiÀÄ ¤ªÀiÁðt

Head of Account :- 2022-23 £Éà ¸Á°£À 15 £Éà ºÀtPÁ¸ÀÄ AiÉÆÃd£É

Estimate Amount :- 111541/-

Sl. No. Item L B D/H Qty Unit Rate Amount

1 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. (PWD SR 2023-24 Item nO 1.5.1 Vol 1)

2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. CHAPTEMix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates

(PWD SR 2024-25 Vol 1 Item no 2.1.2)

3 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with

:(PWD SR 2023-24 Vol 1 Item no 5.1.1)

4 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.

(PWD SR 2024-25 Item no 6.32 Vol 1)

Deduction 1 0.75 1.8

5 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

(PWD SR 2024-25 Item no 8.2.1 Vol 2)

6 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. ( PWD Sr 23-24 Item no 9.10 Vol 2)

( pWD SR 2023-24 Item no 9.17 Vol 2)

7 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops (

PWD SR 2021-22 Vol 2 Page no 8.29)

8 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Long pattern W.C Pan of size 580x440 mm

Karnataka Public Works Department Volume-2 Item no 20.44 Page - 202)

9 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fix- tures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Karnataka Public Works Department Volume-2 Item no 20.44 Page - 202)

10 RCC NP 2 900mm dia

Material ComponentBasic Rate (Excl GST) in Item no 55

11 Providing & fixing Chorinated Poly Venyl Chloride (CPVC) Pipes conforming to IS 15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete (internal work exposed on wall )

(PWD SR18-19 P.No.93. I.No.13.85.2)

12 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.

13 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

(PWD SR2024-25 Item no 2.2.1 Vol 1)

14 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures

(PWD SR 2023-24 Vol 1 Item no 2.11 )

Sub Total 94517

111530.28 Tender premium 3%

Other miscellionous charge

Section Officer Assistant Executive Engineer

PRE Sub Div Byadagi PRE Sub Div Byadagi