PROVISION OF TOILETS FOR COPALPUR SEAWARD FIRING RANGE FOR JCOS OR AND SPL REPAIR AND REPLACEMENT OF EM ITEMS AGAINST BEYOND ECONOMICAL REPAIR BER UNDER GE I GOS

Amount

Surface excavation n.exc 30 cm deep and getting out in Soft/loose soil , complete all as specified.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in Soft/loose soil , complete all as specified.

Excavation in trenches not exceeding 1.5m wide andadditional 1.5 m or part thereof in depth beyond the first 1.5 m and getting out in Soft/loose soil, complete all as specified.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , complete all as specified.

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Columns,pillars,piers,posts and struts etc complete all as specified and directed.

Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions , complete all as specified.

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span , complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc , complete all as specified.

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) , complete all as specified.

M&L for Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed.

Returning, filling in of soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm , complete all as specified.

Removing surplus excavated earth (soil) to a distance n. exc 50 m & Depositing where directed at a level n. exc 1.5 m above the starting point , complete all as specified.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified.

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified.

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar , complete all as specified.

M&L Brick work with Fly Ash bricks bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall , complete all as specified.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using waqter proofing compound @3% by wt of cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound ISI Marked , complete all as specified.

M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper , complete all as specified.

M&L for Preparation of newly plastered surfaces of wall and applying 2 coats of Exterior emulsion weather proof paint over a coat of primer complete all as specified and directed.

M&L three coats of white wash on new plastered ceiling surface including preparation of surfaces , complete all as specified.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface , complete all as specified.

M & L Cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair complete all as specified and directed.

M & L 50 mm thick Cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggreates as in flooring finished even and fair complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement all as specified.(Note- Joint 12 mm wide to the full depth of pcc shall be provided at every 3 metres and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. cost of this provision shall be deemed to be included in the quated rate for concrete in plinth protection , complete all as specified.

M & L 25 mm thick Cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggreates as in flooring finished even and fair complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15mm thick screed bed in CM 1 :6 complete all as specified and directed.

S&F glazed ceramic colored tiles 350x 250x 7mm/ 450X 350X 7mm thick coloured on vertical surface such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tile including rendering 10 mm thick on brick or stone masonry surfaces finished fair and even to recieve tile in CM 1 : 4 complete all as specified and directed.

S&F Powder coated Aluminium anodised glazed side hung door shutters with anodised aluminium frame of section of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle , screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No Aluminium butt hinges B-21 Type and one No mortice brass lock 100 size 4 leaver (Vertical Type) with 01 No door closer Aluminium (Diie cast) body hydraullically regulated designation ;No 02 universal type, for each shutters , complete all as specified.

S&F Powder coated Aluminium anodised galzed fixed window/ventilator made out from anodised aluminium frame of 'H' section size 34.00x43.5x2mm thick including with 4mm thick tinted sheet galss (Weight not less than 0.55 kg/RM and shutter 'Z' of size 34.00x43.5x28.00mm having thickness 2.00mm (Wt not less than 0.50kg/RM) and all necessary jointing cleats , glazing, clips rubber packing, aluminium snap beading including aluminium grill with Mosquito proofing wire mesh etc complete all as specified and directed.

M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern), white, incl 'P' or 'S' trap and plastic water closet seat cover, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as specified.

S&F PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as directed by Engr-in-Chrg

S&F in repair health faucet with flex pipe and hand shover ,the length of hose 1.50 mtr fitted to the tap.complete all as specified

S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting,waste coupling PTMT 32mm dia and waste pipe complete all as specified and directed.

S&F bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated long shank cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts , complete all as specified.

S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube , complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 600 mm , complete all as specified.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I , complete all as specified.

S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S&F 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI/PPR pipe complete all as specified.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors , complete all as specified.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complet all as specified

S & F 25 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complet all as specified

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S & F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed

S&F CP brass towel rail `D’ type 60Cm long fixed to wall , complete all as specified.

S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations , complete all as specified.

S&F 75mm PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement , complete all as specified.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement , complete all as specified.

S&F PVC(SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete all as specified and directed

S&F PVC(SWR) 110mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete all as specified and directed

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

M & L for water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying bot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paint @0.2kg/sqm on top complete all as specified and directed.

S&F MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Grade Fe 410 -W (Gde E- 250) quality A all as specified

S&F MS Rolled sections as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment to walls/floors or in concrete complete all as specified and directed

M&L preparation of new surfaces of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer , complete all as specified.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation/mass concrete, filling etc , complete all as specified.

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide .exc 3.0 m in depth but not exc. 4.5 mtr and getting out complete all as specified and directed.

M&L 150mm internal dia, SGSW pipe laid in trenches in any length, jointed as specified complete all as specified and directed..

M&L for PCC 1:4:8 Type D-2, (using 40 mm graded stone aggregate) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe with concrete after they are laid and tested complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded stone agg) as in surface channel benching etc laid to shapw and slop including all formwork etc. complete all as specified and directed.

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:4 in cement mortar all as Specified and Directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping weathering slightly rounded or chamferred angles and throating use of formwork straight or curved complete all as specified and shown on drgs complete all as specified and directed..

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds, mitered, stopped ends etc complete all as specified and directed..

M & L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone agg as in manhole/drain cover and the like set in CM 1:4 complete all as specified and directed.

M&L for RCC, (nominal mix) 1:2:4 Type B-1 (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L broken Brick bats of size 80 to 150 mm filling work with sub class -B bricks in soakage pit,soakage well

Material and labour for One light point controlled by one 10amps switch, one way point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate,inner frame, blank plate,GI sunken boxes,screws,washers and all modular electrical fixtures are used same make/brand only)

All as per item no. 86 but One fan point controlled by one switch 10 amps, and one regulator.

All as per item no. 86 but One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per item no. 86 but One 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item No.88 & 89 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the One 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent board.

All as per item No.90 One 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No 88 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed.

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :- Havells /Crompton/Philips

Supply and fix LED secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and complete all as specified and directed.Make:- Crompton/Havells / Philips as approved

Supply and fixed in repairs LED floof light light fitting of capacity 70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing complete all as specified and directed.Make:- Crompton/Havells / Philips as approved

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :-Havells /Crompton/Philips

Supply & fixing in repairs sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand /ABB/Havells

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/ABB/Havells

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc complete all as specified and directed.Make of GI pipe:- Jinadal/Tata/Surya Prakash

M & L for sub main wiring complete in repairs with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit in concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 16 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST

Material and labour for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.ISI Marked IS-15801 lying in trenches/wallc/ceilings or in floors and necessary clamps, saddles etc complete of size outer dia 25 mm complete all as specified and directed.

Supply and fixing PPR gate valve(Brass insert) of dia 25 mm fixing at near to building on wall upto one meter height complete all as spfd and directed.

Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 to75 mm by providing and fixing tee including cutting and making fusion joint etc

Supply & fixing modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fix and sheet metal enclosure with metal type AD/DD,415 volts AC,TPN DB,, flush mounting with 200amps copper busbar, 2 neutral/earth bar and MCB incomer,FP, and MCB SP /TP as outgoing and complete for IP54 DBs protection and including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.Make - Legrand/ABB/Havells

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand /ABB/Havells

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand/ABB/havells

Supply only in repairs MCB FP, 63 Amps 10 KA,"C" series,AC,415Volts,50 Hz,ISI Marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature aluminium jali and proper aluminium frame for to avoid insect protection fix at outer surface of wall and making good the disturbed surface area complete all as specified and directed.

M & L for sub main wiring complete with 2 run of 2.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade (MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices, junction boxes etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 2.5 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply and fixing sheet steel metal enclosures with socket and plug top and MCBs single pole and neutral enclosure with a two pin and earth plug socket complete with one single pole MCB 20 amps and including removing old unserviceable item complete all as specified and directed.

Taking down old unserviceable ceiling fan of any type/size from existing location and deposit in MES store yard and Supply and fix ceiling fan of size 1200 mm sweep,high speed, single phase, 240Volts,AC, 50Hz, BEE not lessthen 5 star rated as approved colour and including hanging GI hook with necessary connecting accessories and testing complete all as specified and directed.Make:-Havells( ES-50) or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing 230 V, 1200mm sweep smart brushless direct current decorative type ceiling fan complete with three blades, down rods, smart electronic regulator, smart remote control operating unit,LED down lights,metalic finish, dust resistant and connected accessories, . Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current copper winding motor, colour as per requirement complete all as specified and directed.Make:-Atomberg ( Renesa ) or equivalent in Havells/Orient as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers,holefastners etc complete all as specified and directed

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep with blades and frame with louvers hole fastners etc complete all as specified and directed

Taking down old unsv exhaust fan from existing location and including connected accessories completely and deposit in MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 450 mm and including all necessories complete all as specified and directed.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 300 mm and including providing all connected items complete all as specified and directed.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm and including providing all connected items like nuts, bolts and washers etc complete all as specified and directed.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 200 mm and including providing all connected items like nuts, bolts and washers etc complete all as specified and directed.

Taking down old unserviceable table fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix table fan 230Volts, single phase, oscillating type, 400 mm sweep, Hi-speed,low noise, heavy duty with blades and outer cover and including providing hanging hook and connected items complete all as specified and directed.Make::- Havells/Usha/Crompton

Taking down old unserviceable table fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix table fan 230Volts, single phase, oscillating type, 450 mm sweep, Hi-speed,low noise, heavy duty with blades and outer cover and including providing hanging hook and connected items complete all as specified and directed.Make::- Havells/Usha/Crompton

Taking down old unserviceable wall mounted fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix wall mounted fan 230Volts, single phase, oscillating type, 400 mm sweep, Hi-speed,low noise, heavy duty with blades and outer cover and including providing hanging hook and connected items complete all as specified and directed.Make:- Havells/Usha/Crompton

Taking down old unserviceable wall mounted fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix wall mounted fan 230Volts, single phase, oscillating type, 450 mm sweep, Hi-speed,low noise, heavy duty with blades and outer cover and including providing hanging hook and connected items complete all as specified and directed.Make:- Havells/Usha/Crompton

Taking down old unserviceable air circulators fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix air circulator heavy duty,metal body type fan 230Volts single phase oscillating 500 mm sweep and all connected accessories and including providing hanging heavy duty GI plate/clamp, nuts, bolts and washers complete all as specified and directed.Make:- Almonard/Havells/Usha/Crompton/Polar

Taking down old unserviceable air circulators fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix air circulator heavy duty,metal body type standing fan 230Volts single phase oscillating 600 mm sweep and all connected accessories and including providing hanging heavy duty GI plate/clamp, nuts, bolts and washers complete all as specified and directed.Make:- Almonard/Havells/Usha/Crompton/Polar

Taking down old unserviceable pedestal fan of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix fan farrata type, low noise,smooth functioning with telescopic height adjustment stand ,heavy duty motor,three speed control, 230Volts single phase oscillating 500 mm sweep,1400 rpm high speed and all connected accessories and including providing hanging heavy duty stand complete all as specified and directed.

Taking down old unserviceable pedestal fan of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix fan farrata type, low noise,smooth functioning with telescopic height adjustment stand ,heavy duty motor,three speed control, 230Volts single phase oscillating 500 mm sweep,1400 rpm high speed and all connected accessories and including providing hanging heavy duty stand complete all as specified and directed.Make:- Almonard/Havells/Crompton

Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, connection pipes,holefasterns etc.complete all as specified and directed.Make:- Havells/Crompton/Racold/Venus

Supplying and laying of CPVC /UPVC pipes SDR 11 & Plain SDR 11 incl all fittings of outer dia 16 mm on walls/ceiling or laying in floors and including removing old unservieable item complete all as specified and directed

Supply and fixing stop valve standard of PTMTany colour high pressure screwed ,for iron pipe or CPVC/UPVC and fixed minium weight 15 mm-90gms and including removing old unservieable item complete all as specified and directed

Supply and fixing bib tap standard of PTMTany colour high pressure screwed ,for iron pipe or CPVC/UPVC and fixed minium weight 15 mm-90gms and including removing old unservieable item complete all as specified

Supply and fixing stop valves,cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm dia iron or PVC pipes or for unions and fixed and including removing old unservieable item complete all as specified and directed

Supply and fixing bib taps,cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm dia iron or PVC pipes or for unions and fixed and including removing old unservieable item complete all as specified and directed

Supply and fixing15 mm dia pillar taps,cast copper alloy with capstan heads chromium plated screwed down, high pressure, with or withou lettered hot or cold with long screwed shanks and fly screwed for iron pipes and fixed for iron or PVC pipes and all connected accessories and including removing old unservieable item complete all as specified and directed

Supply and fixing 15 mm dia brass CP mixter for mixing hot & cold water screwed down for iron pipes or PVC pipes and fixed all accessories and including removing old unservieable item complete all as specified and directed

Supply and laying 3 layer PP-R (Poly-Proplene randam copolyermer) outer dia of pipes 16 mm dia, concealed pipes SDR 7.4(PN-16) UV stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PPR plan & brss threaded polypropylene random fittings complete to walls, ceilings or in floors ect 15 mm dia brass CP mixter for mixing hot & cold water screwed down for iron pipes or PVC pipes and fixed all accessories and including removing old unservieable item complete all as specified

M/s M M Engineering Systems

HARAGOURI SUPPLIERS

M/S. KISHAN ENGINEERING

Garima Construction Co

M/s Bapujee Builders and Traders

M/s Ats Electricals

GRAND SERVICES

R K Traders