REPAIR/MAINT OF STREET LIGHTS AND CONNECTED ALLIED WORKS INCLUDING LED FLOOD LIGHTS, LED STREET LIGHTS FOR DMSRDE COMPLEX, WAR MEMORIAL COLONY, 60 SCIENTIST HOSTEL, TRANSIT HOSTEL AND MES COLONY UNDER GE (I) R and D KANPUR.

Amount

Supply and fixing of PVC insulated, PVC sheathed flat twin core of stranded aluminium conductor cable/wire of 6.0 sq mm with ISI marked as per IS- 694/1990 with latest amendments including removing old connection and making service connections to street light feeder in replacement of old unserviciable/worn out complete all as specified and directed. Make:- Havells/Plaza/Polycab.

Supply & fixing bldg/poles light bracket made out 32 mm dia bore G.I pipe, light grade of length not less than 1.5 Mtr, bend to required shape for holding the fitting including Clamps 50x6 mm Flate Iron ,Nut & Bolts for supporting the brackets and taking down the old bracket from existing pole/building complete all as specified and directed.

Supply and fixing in replacement of flood light fitting by LED flood light 120 Watt aluminium die cast powder coated housing and frame , high efficiency long life LEDs, high purity PMMA lenses for superior performance , toughened glass with EPDM gaskets for IP 65 protection ,loop in loop out connector, complete assembly with LED driver and accessories pre wired up to terminal block in control gear compartment , intergal covered control gear compartment with connector 240 volt AC, complete with all acessories as specified and directed . MAKE:- LED Flood light: Orion 2.0 series. Cat No LTEFI120WHPLED of Make C&S/or its equivalents of Crompton/Philips/Bajaj

Supply, fixing and testing in replacement of Old unserviceable/ worn out street light fitting by pressure die cast powder coated LED street light 100 watt 240 volt Mains current 0.39 Amps, in built integrated electronic LED driver toughened glass with silicon gaskets for IP 65 protection complete all as specified and directed including all accessories complete . Make :Cat part no. LSTP-100-CDL-M of Crompton equivalent model in Phillips/HavellS/BAJAJ/Wipro/Cat part no. LTESSS100WHPLED/LS 100 watt of C&S as approved by GE (I).

Supply and fixing in replacement of flood light fitting by LED flood light 200 Watt with unique design and thermal managemtn , high efficiency long life LEDs, high purity PMMA lenses for superior performance , toughened glass with EPDM gaskets for IP 65 protection ,loop in loop out connector, complete assembly with LED driver and accessories pre wired up to terminal block in control gear compartment , intergal covered control gear compartment with connector 240 volt AC, complete with all acessories as specified and directed . Cat No LFLPI-200-CDL/60 of Make Crompton or its equivalents of Bajaj/Havells/Philips.

Supply, fixing and testing in replacement of old unserviceable/ worn out LED BOLLARD Canis Series, housing material is powder coated Zn Plate ERW MS Tublar sections.LED street light 9 watt 240 volt Mains current 0.045 Amps,Light source SMD LED array having IP 66 protection complete with all accessories complete all as specified and directed. Make:- C&S Cat part no. LTGLCW9WLED / Bajaj Cat part no. BGBOS 600 9W LED or equivalent in Philips / Crompton as approved by GE. NOTE: Quoted rate included the fixing arrangemetns like nut bolts washers, PCC all types of fixing arrangemetns as required as per instructions.

Dismantaling of cross arms, bracings, supports, clamps, flood light/ street lights supporting arrengement/ring on top and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending colt or hot, drilling holesfor bolt. In any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint.

Supply and fixing of cross arms, bracings, supports, clamps, flood light/ street lights supporting arrengement/ring on top and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending colt or hot, drilling holesfor bolt. In any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint.

Routine and periodical work required for trimming / cutting of tree branches of any girth, touching /obstructing the over head lines of HT/LT poles of three phase distribution system at places not more than 40 mtr span distance so as to keep minimum 2.0 mtr clearance all around the lines and poles with due care after taking proper electric shoutdown from concern JE including disposal thereof ( trimmed branches) to a distance not exceeding 100 mm complete all as specified and directed.

Cutting/ chassing or Boring as required in hard standing/PCC / Road exceeding 10 Cm girth for concealed to GI tubing and making good to disturbed surface with cement mortar 1:3 to match with existing surfaces including facing/finishing where as required or as directed by GE(I).

Replacement of GI tubing light grade 40 mm dia with all fitting and fixed complete to wall laid in trenches floor, road crossing and fixing arrangement complete for under ground cable protection including such as MS flats iron clamp nut & bolts washers all as directed and specified.

Supply and fixing of PVC insulated, PVC sheathed flat twin core of stranded aluminium conductor cable/wire of 10.0 sq mm with ISI marked as per IS- 694/1990 with latest amendments including removing old connection and making service connections to street light feeder in replacement of old unserviciable/worn out complete all as specified and directed. Make:- Havells/Indo Asian/Plaza.

Excavation in trenches not exceeding 1.5mtr wide and above 1.50 mtr and not exceeding 3.00 mtr deep in soft/loose soil and getting out for laying the cable complete all as specified and directed.

Returning re-filling of excavated soil after laying the cable with spreading leveling watering with ramming in layers not exceeding 25cm thick in loose/soft soil complete all as specified and directed.

Removal of surplus soil/excavated material obtained from ground level to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5mtr above from the starting point complete all as specified and directed.

Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Cement concrete 1:4:8 type. D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping for electric poles etc above ground level finished to required shape including necessary form work complete all as specified and directed.

Supply & spreading locally available ganga sand in trenches for cable cushioning complete all as specified and as directed by Engr-in-charge.

S&L bricks burnt for protection of cable Sub class 'B' bricks laid dry flat across the cable with length of whole brick complete.

Taking out existing worn out/old PVC insulated cable in 2/4 core of 16/25 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site complete in all respect and as directed at site.

Supply, Laying, jointing, testing and commissioning of XLPE insulated, PVC sheathed armoured, 25.0 Sq.mm, 3.5 core, solid aluminum conductor electric cable for working voltage of 1100 V grade incl Aluminium lugs, thimbles complete confirming to IS:7098 Part-I complete all as specified and directed. Make: Havells/Finolex/Polycab/Gloster

M&L for preparing scraping the old painted surfaces and applying one coat of aluminium paint on steel tubular swaged poles and swan neck /bracked, chanels/angles including making/pasting three nos cricular strips of 300 mm wide yello & black colour with synthetic reflected enamel paint and marking /stencil writing of pole numbers with black paint complete and all as specified and directed.

Supply, errecting and fixing in replacement of in true vertical position steel tubular swaged pole complete with coat iron base plate, finial taper plug, bolt, nuts and screw,weld and reduced section and logitudional weld Seam through out entire length of pole including 2 coats of black bituminious paint through out intrnely and externely up to planting depth and remaining exterior portion of pole with two caot of aluminium paint over a coat of red oxide as specified type 410 SP 31 (9.00 Mtr long) conforming to IS-2713-1980 complete all as specified and directed. Note:- Excavation, Earth work and PCC in foundation shall be included in quoted rates.

M&L for pre- fabricated street light junction /distribution box of size 200mm x250 mm with hinged cover system made of MS Sheet/ CRCA sheet duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer suitable for mounting on pole including fixing on pole with clamp 50x6 and nut, bolts and suitable size Aluminium bus bar 04 Nos (3 Phase,1N) connecting incoming and out going connection with proper lugging as latest practice acting as control circuit for street light including MCB SP 'C' 6 Amps for control of s/light complete all as specified and directed.

Disconnection taking down and opening for replacement of unserviceavle parts with internal wiring and refixing after rectification of defects and functioned properly of street lights /security lights/post top lantern/flood lights any type, size, capacity from poles/sentry posts/top of buildings complete all as specified and directed.

SAKSHAM SUPPLIERS BUILDERS

Bharat Sales Corporation

BRIGHT TRADRES

Kumar Electricals

Himanshu Construction and Suppliers