Special Repair of NH-232 A km-155 Nihastha to Dulapur Link Road

Providing ,Laying and spreading material on a prepared sub-base, cement @ 4% by weight to the spread material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base/base. (Including all taxes but Excluding GST)

Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. (Excluding GST, Bitumen and Machinery)

Providing, laying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm stone grit @1.8 cum/100 sqm and 11.2 mm stone grit @0.90 cum/100 sqm stone aggregates using V.G.-10 bitumen to required line, grade over freshly laid tack coat of bitumen VG-10 with bitumen boiler and sprayer at the rate of 35 Kg. per 100 Sqm including mixing in a deptt. H.M.P. located in Km-208 (Chanda) of Bahraich-Banda Road (SH-13) in Distt. Raebareli, laying and rolling with a three wheeled 80-100 KN static roller capacity finished to required line, level and grades, including cleaning of granular surface, cost of labour & grit but excluding cost of bitumen, hire charges and fuel of HMP and allied machinery required for the proper completion of the work. As per MORD Technical Specification Clause-508. (Excluding GST, Bitumen and Machinery)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, excluding cost of bitumen, hire charges and fuel of all machinery required for the proper completion of the work. As per MORD Technical Specification Clause-510. (Excluding GST, Bitumen and Machinery)

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(Including all taxes but Excluding GST)

Please Enable Macros to View BoQ information