Repair/maint of manholes, drain, garbage bins, sewage line including cleaning of sewage line and certain misc B/R works of Zone B and C at Old Cantt Prayagraj.

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not specifically provided (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for precast RCC (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate) as in mahhole/ drain cover slabs and the like including providing necessary form work etc, set in cement mortar (1:4) complete all as specified and as directed. Note : Reinforcement to be measured and paid separately.

M&L for mild steel TMT bars, 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. including rubbish off the premises complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 (Except brick) complete all as specified and as directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces on wall, finished even and smooth without using extra cement complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces on wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of External weather Proof Paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for PCC 1:5:10, type E-2 (using 40 mm graded brick aggregate) as in filling up sunken floors complete all as specified and as directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, CI trap 100 mm Bore etc complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete. Note : Plastic seat cover shall be measured separately as Supply only as considered under respective items.

S&F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet float valve including bracket & with 32mm dia PVC flush pipe 600 mm long complete all as specified and directed.

Supply only plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or Aluminised hinging device complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing rubbish off the premises complete all as specified and as directed.

M&L for non skid joint free ceramic coloured tiles 7mm to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles 300mm X 200mm x 5mm to 6 mm thick, in vertical surface such as skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450mm X 300mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&L for light shade coloured Vitrified Ceramic tiles 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4complete all as specified and as directed.

M&L for light shade coloured Vitrified Ceramic tiles 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

S&F in repairs 25 mm dia stainless steel tube as in curtain rod of 304 grade for door & windows including one pair of SS bracket and steel end cover for each rod, cut to size and fixed in position complete all as specified and directed.

M&L for non skid coloured ceramic Heavy duty garden tiles, area not exceeding 0.11 Sqm each tile, 10mm thick, set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F in repair, Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or typing at crossings with and provision of galvanised mild steel wire, staples or steel pins in repairs, etc. complete all as specified and as directed. (each line wire to be measured)

Restraining/ Resecuring including making good wire staples of galvenised barbed wire etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not exceeding 10 cm in width or girth and applying two coats of Aluminium paint over a coat of redoxide primer complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not exceeding 10 cm in width or girth and applying one coat of aluminium paint complete all as specified and as directed.

M&L for PCC 1:3:6, type C-1 (using 20 graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel, 30 cm inner girth, in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in coping, bed block etc. including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.

M&L for 35mm thick precast cement concrete jallies 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate ), set in CM 1:4 any design or shape as instructed by engineer in charge including RCC pillars 10 CM X 10 CM for jallies, in repair complete all as specified and directed.

M&L for PCC 1:4:8 , type D-2, (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick cement concrete type-D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of floors path/ pavings etc complete all as specified and directed.

M&L for chequered cement concrete tiles having hard rubber finish top with polymer admixtures in any pattern or design of min size 30cm x 30 cm x 25 mm thick, set jointed and poited in neat cement slurry in floors over and including 15 mm thick screed bed in CM mortar 1:4 complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block having hard rubber finish top with polymer admixtures in any pattern or design any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade with grey cement and no pigment over and including 50mm thick dry sand bed or bedding layer complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed

M&L for 20mm thick granite stone slab, machine cut in vertical surfaces such as on gate pillars in single piece laid over and including 15mm thick cement screed in cement mortar 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including polishing complete all as specified and directed.

Cleaning of chocked sewer line of 100 mm dia at any depth below ground level, through manually or through mechanical appliances and making sewer line functional, depositing the sludge rubbish etc off the premises at an isolated places out side the MOD land, where directed (n'exc 5Km distance) complete all as specified and directed Note :-(i) Manholes connected with effected sewer line shall be measured separately. (ii) working to be exicuted under foul conditions and unit rates quoted shall deemed to includ this espect.

All as per item No. 43 above but 150mm dia sewer line.

All as per item No. 43 above but 200mm dia sewer line.

Desluding/dewatering/cleaning of existing manhole of any depth by any means ie mechanically or manually operated by taking out off sludge or solid waste night soil (silt) in any proportion and silted soil from the existing manhole of any size and including working under foul condition and depositing the removed sludge rubbish etc from the premises complete all as specified and directed by Engineer in charge. NOTE :- Sludge or soil night waste soil (silt) will be disposed of the area out of premises of MOD and covered the same by bleaching powder @ 1.5 Kg/Sqm over surface of night soil or sludge.

Cleaning of chocked water closet/ WC/ Floor trap/ Gully trap etc. manually by taking of sludge waste, night soil and silted soil from the existing pipe, by taking out accumulated garbage, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the floor trap/WC/gully trap with water complete as directed by the Engineer-in-Charge.

Demolition and breaking up SGSW drain pipes of internal dia 150 mm, set in cement mortar complete all as specified and directed. Note : Excavation, earth work, salt glazed stoneware drain pipes, concrete bed to drain pipes shall be measured & paid separately under respective items.

Demolition and breaking up SGSW drain pipes of internal dia 200 mm, set in cement mortar complete all as specified and directed. Note : Excavation, earth work, salt glazed stoneware drain pipes, concrete bed to drain pipes shall be measured & paid separately under respective items.

M&L for salt glazed stoneware drain pipes 200 mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.

M&L for salt glazed stoneware drain pipes 150 mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.

Concrete bed to drain pipes 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and directed.

All as per item No. 52 above but 150mm dia

S&F in repair PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor, 110 mm bore complete all as specified and directed

S&F in repair PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor, 75 mm bore complete all as specified and directed

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm dia PVC (SWR) bends with access door, any radius complete all as specified and directed

S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends with access door, any radius complete all as specified and directed.

S&F in repair PVC SWR floor trap 75 mm dia with grating incl jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and directed

S&F in repair 110 mm bore PVC (SWR) vent Cowl complete all as specified and directed

S&F in repair exterior digital Elevation tiles of size 300mm X 450mmx 7 to 8 mm thick on walls etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete all as specified and directed.

S&F in repair 3mm thick ACP panel as in wall panelling or cladding of required colour, fixed on mild steel framing or grid of specified spacing by drilling hole with screw complete all as specified and directed. NOTE : Joints of panels shall be sealed with silicon tape as per manufacturer instructions.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any weight not exceeding 4kg/sqm complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for mild steel work conforming to Fe 410-0 or Fe 310-0 in joist channel angle rolled section ,ms plate, sheet as in door , posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. complete all as specified and directed.

Supply only MS galvanised chain link fencing, any size or shape as per sample approved by GE complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5 cm long dia of neck 11 to 15 mm complete all as specified and directed.

Dismantling AC corrugated sheets in roof covering including ridges, hips, valleys and flashings etc complete all as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old /untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M/S Akhilesh Enterprises

vs construction

M/S SS Tarders

Shivagya Engineering

Vibha Enterprises

KRISHNA BAHADUR