MAINT/SOPD-G/2025-26/73

Amount

1- SPT Br.No 1/1 on Barpeta Dangarkuchi road :- Making 120 cm wide bomboo foot bridge with 100 mm Bhaluka or Barua bamboo posts driven 120 cm to 180 cm underground 3 Nos in each row and rows being 3 m apart bholuka or barua bomboo dham placed over the posts and tied with cane or wore , bhaloka or barua bamboo struts in each row both up and down stream ,jati bamboo longs gorths closely packed and tied with dham ,single layer of mat placed over 75 mm thick brush wood and tied with bholuka or Barua bomboo rail stand fixed in one side of the bridge etc. comple.

Labour for dismemtelling all members of the timbers bridge ( excluding piles) with necessary scaffolding ,jati bamboos ,jumper ropes etc. complete and stacking them at suitable places as directed ( all members will be under custody of the contractor till taken over by the department)

Labour for taking out old piles of timber bridge with necessary scaffolding , Jati bamboos , Jumper ropes etc, complete and stacking them at suitable places as directed

Supplying and driving timber piles 25 cm to 30 cm dia dressed to heart wood including making length in every 30 cm interval , coaltering two (2) coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar(a) Mechanically with road monkey and crab winch i) Portion of pile actually driven under ground

Supplying and driving timber piles 25 cm to 30 cm dia dressed to heart wood including making length in every 30 cm interval , coaltering two (2) coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar (a) Mechanically with road monkey and crab winch i) Portion of pile remaining above ground

Scarfing and joining piles 25 cm to 30 cm diameter. Dressed to heart wood each joint 90 cm in length including supplying ,fitting, and fixing with 2 nos. of 50mmx10mm MSFI and 16mm dia MS bolts and nuts etc complete as directed ( Timber for piles and coal tarring shall be measured and paid separately)

(a)Supplying fitting and fixing sal swan timber beam and bearing beam rectangular in size fitted with MS straps etc including supplying spikes etc necessary and caol tarring two ( 2) coats with tar applied hot as directed ( Rate is inclusive of cost of the required quantity of tar

Labour for fitting and fixing RSJ beams , CI saddle etc. in position including necessary scaffolding ,and fixing with necessary bolts & nuts , painting two coatscomplete (Tar -Steel paints to be supplied by the contractor at his own costs ) including all lead and lifts PWD Godown ( RSJ of size 300 mm x 140 mm )

Supplying fitting and fixing U shaped flat iron strap making0.50 x 0.30 m size from 150 mm x 12 mm size MS flat including providing 10 bolts holes and fitting with 0.35 m long 20 mm dia MS bolts including fitting tightly with bearing beam , pile and RSJ beam etc as directed bu the department

Sal wood work including supplying fitting fixing complete with necessary M.S bolts,nuts, nails, screws etc and coal tarring two (2) coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar) Undressed in floor planks, collars, bracing, standards, wheel guard, runner ,belt, railing etc

In Trackway planks (alternate nailing to be done in staggered way)

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m transporting to site , spreading grading to required slope and compecting to meet requirment of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Spcification Clause 301.5 ( Private Land)

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site , spreading , grading to required slope and compected to meet requirment of Table 300.2 with a lead upto 1000 m as per Technical Spcification Clause 303.1 ( Private Land)

Construction of Granular surface course by providing well graded material , spreading in uniform layers with motor graded on prepared surface , mixing by mix in place method with rotavator at OMC , and compecting with three wheel 80 - 100 KN static roller capacity to achive the desired density , complete as per Technical Spcification Clause 402 .(ii)

Single bamboo spur and palisading of whole 1st class bamboo (Bholuka or Barua ) 85 mm to 100 mm dia. closely packed & driven, including fitting, fixing with half 2nd class bamboo (Jati or Behua) horrizontally in three rows with cane or tying wire complete and struts 1500 mm apart longitudinally and providing brush wood in the spur as per drawings and technical specifications Clause (A) Driven at least 900 mm below ground and 1800 mm above ground

Providing and dumping sand filled cement bags including sand filling in empty cement bags and tied with coir string on mouthof cement bags and carriage to work side and dumping at proper position as directed by the department.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 800mm x 600mm rectangular

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

2_ SPT Br No 1/1 at Deuri kuchi Bhalukamari road:- Making 120 cm wide bomboo foot bridge with 100 mm Bhaluka or Barua bamboo posts driven 120 cm to 180 cm underground 3 Nos in each row and rows being 3 m apart bholuka or barua bomboo dham placed over the posts and tied with cane or wore , bhaloka or barua bamboo struts in each row both up and down stream ,jati bamboo longs gorths closely packed and tied with dham ,single layer of mat placed over 75 mm thick brush wood and tied with bholuka or Barua bomboo rail stand fixed in one side of the bridge etc. comple.

Labour for dismemtelling all members of the timbers bridge ( excluding piles) with necessary scaffolding ,jati bamboos ,jumper ropes etc. complete and stacking them at suitable places as directed ( all members will be under custody of the contractor till taken over by the department)

Labour for taking out old piles of timber bridge with necessary scaffolding , Jati bamboos , Jumper ropes etc, complete and stacking them at suitable places as directed

Supplying and driving timber piles 25 cm to 30 cm dia dressed to heart wood including making length in every 30 cm interval , coaltering two (2) coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar(a) Mechanically with road monkey and crab winch i) Portion of pile actually driven under ground

Supplying and driving timber piles 25 cm to 30 cm dia dressed to heart wood including making length in every 30 cm interval , coaltering two (2) coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar (a) Mechanically with road monkey and crab winch i) Portion of pile remaining above ground

Scarfing and joining piles 25 cm to 30 cm diameter. Dressed to heart wood each joint 90 cm in length including supplying ,fitting, and fixing with 2 nos. of 50mmx10mm MSFI and 16mm dia MS bolts and nuts etc complete as directed ( Timber for piles and coal tarring shall be measured and paid separately)

Supplying fitting and fixing sal swan timber beam and bearing beam rectangular in size fitted with MS straps etc including supplying spikes etc necessary and caol tarring two ( 2) coats with tar applied hot as directed ( Rate is inclusive of cost of the required quantity of tar

Labour for fitting and fixing RSJ beams , CI saddle etc. in position including necessary scaffolding ,and fixing with necessary bolts & nuts , painting two coatscomplete (Tar -Steel paints to be supplied by the contractor at his own costs ) including all lead and lifts PWD Godown ( RSJ of size 300 mm x 140 mm )

Supplying fitting and fixing U shaped flat iron strap making0.50 x 0.30 m size from 150 mm x 12 mm size MS flat including providing 10 bolts holes and fitting with 0.35 m long 20 mm dia MS bolts including fitting tightly with bearing beam , pile and RSJ beam etc as directed bu the department

Sal wood work including supplying fitting fixing complete with necessary M.S bolts,nuts, nails, screws etc and coal tarring two (2) coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar) Undressed in floor planks, collars, bracing, standards, wheel guard, runner ,belt, railing etc

Labour for taking out old wood works of bridge and the refitting the same including supplying and fixing necessary new MS bolts, nuts ,spikes,nail etc. complete and coal tarring with coal tarring with best tar applied hot as directed (Rate inclusive of cost of the required quantity of tar

In Trackway planks (alternate nailing to be done in staggered way)

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m transporting to site , spreading grading to required slope and compecting to meet requirment of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Spcification Clause 301.5 ( Private Land)

Single bamboo spur and palisading of whole 1st class bamboo (Bholuka or Barua ) 85 mm to 100 mm dia. closely packed & driven, including fitting, fixing with half 2nd class bamboo (Jati or Behua) horrizontally in three rows with cane or tying wire complete and struts 1500 mm apart longitudinally and providing brush wood in the spur as per drawings and technical specifications Clause (A) Driven at least 900 mm below ground and 1800 mm above ground

Providing and dumping sand filled cement bags including sand filling in empty cement bags and tied with coir string on mouthof cement bags and carriage to work side and dumping at proper position as directed by the department.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 800mm x 600mm rectangular

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

M/S Royal Smart Construction (BID ID -276176)