PETTY REPAIR AND CERTAIN B/R WORKS LIKE PLASTERING , CHAJJA REPAIR, INTERNAL WATER SUPPLY AND ALLIED WORK SERVICES IN CQAE (WE) BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and 15mm thick screed bed in CM 1:4, all as specified & directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick backing coat in cement mortar (1:4) complete all as specified & directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough.

M&L for 20mm thick Granite (of any type) work(table rubbed and polished) in cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade .

M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for glazed ceramic colour designer concept glazed ceramic tiles 450x350x7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified & as directed by Engr-in-Charge.

M&L for non skid coloured ceramic tiles area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick backing coat in cement mortar in (1:6), complete all as specified and as directed by Engr-in-charge.

M&L for repairing of 40mm thick flooring in patches with PCC (1:2:4) 20mm graded stone agg. & finished even & smooth w/o using extra cement. . The rates include demolition of existing concrete complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar all as directed.

M&L for brick work with sub class 'B' bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete incl demolition of brick work built in cement mortar all as specified & directed by Engr-in-charge.

M&L for brick work with sub class 'B' (old size) straight of curved on plan to any radius built in half brick wall using CM 1:4 complete all as specified & directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster in CM (1:6) including finished even and smooth (without using extra lime or cement).

M&L for rendering 10mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling of old Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work.

S&F ceiling board 12mm thick in ceiling all complete as per manufacturer’s instructions . Make:Amstrong Board or equivalent as approved by GE.

S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Eng-in-charge.

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No 18 above but exceeding 1.5 sqm but not exceeding 4 sqm

Taking down shutters of any description exc 1sqm and n.exc 2sqm each

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

S&F 30 mm thick flush shutter, soild core construction, with particle board core and plywood face panels, (membrane doors of any colour any Code/model name of Maxon doors only)all specified and directed.

S&F second class hard wood glazed and skeleton shutter for doors open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or mitered and rebated sash bars any number, edges or framing, plain chamfered or rounded fitted with beads for securing glass gauge size of members of shutters as specified in SSR part I factory made shutters of 35 mm thick all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with 19mmx19mm MS square tube. EPDM rubber gasket weather seal to be provided throughout the frame. The profile shall be mitre cut at two corners and joined by inserting 2mm of 150mm long brackets of 15x15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed. The door frame shall be fixed to the wall using 65x100mm long cdium plated screws through the frame by using PVC fasterness. A minimum of 06 Nos screws to be provided for each frame supplying & fixing in opening as per specified and directed Note : Cuting holes, providing cement concrete for holdfast finishing all disturbed surfaces (CM 1:4) around door frame etc are deamed in this item

S&F factory made Moulded solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lack rail & bottom rail on either side & as far insert for top rail & bottom rail ; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beating and joined together with solvent cement supplied and fixing in the frame at site including all fixture & fittings etc all as specified and as directed.

S&F 100 mm Stainless steel hinges of any colour all as specified & directed by Engr-in-charge

S&F 75 mm Stainless steel hinges of any colour all as specified & directed by Engr-in-charge

S&F Stainless steel barrel tower bolt 150mm of extruded section

S&F Stainless steel handle 150mm all as specified and directed by the engineer -in -charge.

S&F Stainless steel handle 100mm all as specified and directed by the engineer -in -charge.

S&F in repair 100mm floor door stopper of Stainless steel body ,fixed in floor all as specified and directed by Engr-in-Charge.

Easing of aluminium doors including taking out door shutters and changing of certain parts if required like pilots,hinges,rubber beadings etc as required and re-fixing in same position and size of doors n.exc 4 sqm each.

All as per item no 32 but for windows.

S&F aluminium annodised section for door/window/ventilator not less than 2mm thick and for fully glazed door with 5.50mm thick tinted/frosted glass with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F aluminium annodised door/Windows/ventiliator shutters aluminium section weighing 0.55kg/m including necessary joining, fixed type, cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges, anodised alumnium snap beading, screw etc, complete all as spd.

Taking down wire mesh any size all as specified and as directed.

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .

S&F 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.

S&F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers.

S&F in repairs ISI marked hydraulically regulated door closer designation no.03 universal type,suitable for door shutters of 851 to 1000 mm in width and weight betwwen 61 to 80 kg width upto 1.50 mm mtr and weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge..

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge

S&F as in repairs Mortise lock, vertical type, size100 mm four lever .

Easing of wooden window shutters/CB shutters (One unit shall comprising of one window/ CB/ Showcase/ irrespective of number of leaves) for properly closing/ opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc complete all as specified & directed by Engr-in-charge.

All as per srl item No 43 above but door shutter all as specified & directed by Engr-in-charge.

M&L for replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrought for glazing or gauged joinery for fixing wire gauge/ securing glass pane complete all as specified and directed by Engr-in-Charge.

S&F in repair MS 180mm( Powder coated), ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-Charge. Note:- one unit shall be comprising of one window irrespective of no of leaves/shutter work to be carried out up to 12m height.

M&L for 3mm thick acrylic sheet n exc 0.50 sqm in each pane & fixed to steel window by drilling holes/punching/screwing fixed with beads with metal panel pins/spring clips in metal surrounds including taking down old glass with putty. Work to be carried out up to 12m height complete all as specified and directed by Engr-in-Charge.

M&L for Running welding in repairs on metal to be welded of thickness exc. 6mm but n.exc. 9mm including preparation of surface, etc complete all as specified and directed by Engr-in-charge.

S&F in repairs Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; etc including dismantling of old sections complete all as specified & directed by Engr-in-charge.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type lockable cover complete all as specified and directed by Engr-in-Charge.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type cover complete all as specified and directed by Engr-in-Charge. Make- Sintex

Taking down water tank cover all as specified and directed by Engr-in-Charge.

S&F in repair for PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system. complete all as specified and directed. The cover to be provided 500/1000 ltrs capacity.

Removal of air lock/blockage of water in G I Tubing 15,20,25mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-Charge.

S&F Ball Brass valve 25 mm dia high pressure, with polythene float and flynut complete all as specified and as directed.

All as per item 56 above but 20 mm dia

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F 15mm GI steel tubing medium grade with all fittings and fixed complete to walls and ceiling and laid in floors.

S&F 20mm GI steel tubing medium grade with all fittings and fixed complete to walls and ceiling and laid in floors.

S&F CPVC pipes 20 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

Taking down and re-fixing of old steel tubing connection in new or old position (wall etc) including cleaning for re-fixing bore of pipe 15mm/20mm dia complete all as specified and directed by Engr-in-Charge. Note: - New GI fittings such as elbow, socket, Tee, Union, Nipple are included in rates if required for re-fixing of pipe.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repairs PVC(SWR) bends 110mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repairs PVC(SWR) bends 75mm dia complete all as specified & directed by Engr-in-Charge.

S& F in repairs PVC (SWR) P trap 110/110mm bore, all as specified.

S&F in repairs PVC (SWR) S trap 110/110mm bore, all as specified.

S&F High density polyethylene pipes 50 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls,floors,ceiling etc. Including necessory fittings.

M&L for 75mm dia of outlet PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engr-in-charge . Make:Cera or equivalent as approved by GE.

S&F in repair wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed by Engr-in-Charge. Make - Cera or equivalent as approved by GE.

S&F in repairs plastic EWC seat cover of white colour pedestal pan , closed pattern withg flat bottom & cover including MS chromium plated ,alum hinging devices complete all as specified and directed by Engr-in-Charge. Make: Cera or equivalent as approved by GE.

S&F in repairs 10ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets complete all as specified and directed by Engr-in-Charge. Make- Cera or equivalent as approved by GE.

S&F PVC syphon kit for low level flushing cistern .Make: cera or equivalent as approved by GE.

M&L in replacement of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture and valve mixture of any description fixed in repairs complete all as specified and directed by Engr-in-Charge. Suitable for make Jagur,Cera,Sieko and Zollota etc or equivalent as approved by GE.

S&F in repair for vitreous china wash basin white flat back size 550x400 including cutting for and pinning in ends of brackets including of fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, PVC connection with 15 mm PTMT cheknuts, brackets all complete as directed by Engr in Charge.

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 300gms) in repair.

S&F in repairs CP Towel rail including fiitings of neccessary screws etc complete all as specified and directed by the Engr-in-Charge. Make:Cera Model 500103 or equivalent as approved by GE.

S&F in repairs CP Towel ring of including fiitings of neccessary screws etc.complete all as specified and directed by the Engr-in-Charge. Make:Cera Model 500105 or equivalent as approved by GE.

S&F in repairs CP health fauccet of including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make-Cera 8030103 or equivalent as approved by GE.

S&F in repairs Glass shelf of cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make:Cera Model F-5005102 or equivalent as approved by GE.

S&F PVC Cabinet mirror (size 500x400mm) all as specified directed by engr in charge. Make: Prayag Cat No.556 or equivalent as approved by GE.

S&Fin repairs Basin mixer 15 mm dia Fancy type Cera model F-2008461 or equivalent as approved by GE.

S&F in repairs swan neck Pillar cock CP 15 mm dia model Cera F2008105(Right)or equivalent as approved by GE.

S&F in repair Waste coupling of CP ( half or full threaded) of 40 mm dia.

S&F as in repair 15mm dia PVC connection 450/600 mm long all as specified.

S&F in repairs PVC waste pipe 32/40 mm dia for urinal

S&F in repairs PVC waste pipe 32/40 mm dia for WHB/Sink

Taking down the existing bottle traps of wash hand basin refixing the same after cleaning including replacement of washers, packing etc if required complete all as specified & directed by Engr-in-charge.

S&F brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or all as specified, fixed as in repairs complete all as specified and directed by Engr-in-Charge.

M&L in replacement of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs complete all as specified & directed by Engr-in-charge.

S&F in repair 70 mm long fancy type shower roses brass chromium plated with CP arms for 15mm bore GI pipe with 235 mm long shower arm complete all as specified & directed by Engr-in-Charge. Make:Cera Model F- 702106 or equivalent as approved by GE.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera Model F3002152 or equivalent as approved by GE.

S&F in repair 15 mm dia bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera model No F2002161 or equivalent as approved by GE.

S&F in repair bib tap of PTMT any colour 15mm dia in repairs all as specified. Make:Prayag or equivalent as approved by GE.

S&F in repair stop valve of PTMT any colour screwed for iron pipe and fixed 15mm bore all as specified. Make:Prayag or equivalent as approved by GE.

S&F in repair gun metal globe gate valve 20 mm bore.

S&F in repair Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H) or equivalent as approved by GE.

S & F Wall mixer non telephonic Shower arrangement with connecting legs & Wall flanges, fixed in repairs. Make - Jaguar, Cat Part No - CON-219KN or equivalent as approved by GE.

S&F in repair 15 mm dia CP Pillar taps (fancy type), cast copper alloy with capstan heads, chromium plated,handle screwed down high pressure, with or without lettered HOt or cold with long screwed shanks and fly nuts ,screwewd for crewed for iron pipe and fixed complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera Model 3002101 or equivalent as approved by GE.

S&F in repairs Angle cock with wall flange 15 mm dia Fancy type. Make:Cera Model No QTF 2006201 or equivalent as approved by GE.

S&F in repairs stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15mm bore dia.

S&F in repairs stop valve fancy type chromium plated long shank and cup (concealed type)

S&F in repairs Soap Dish holder all as specied and directed by Engr-in-Charge. Make : Jaguar (Code No ACN-1131N) or equivalent as approved by GE.

S&F Paper holder with Flap Recessed Type (Stainless steel), in repairs, all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No AQN-7753) or equivalent as approved by GE.

S&F Corner Glass shelf with bracket, in repairs, all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No CAN-1173) or equivalent as approved by GE.

Taking down & Refixing of CP Fittings such as 15 mm dia Angle valve, Bib cock, stop cock complete all as specified and directed by Engr- in - charge.

S&F in repair Sink with drainage board made of stain less steel 1mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as approved by Engr-in-Charge. Make : Nirali, Diamond ,Neelkant ,Parryware Shakti, Prayag,Blue Star or equivalent as approved by GE.

S&F in repair Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr . Make :,Blue star,NIRALI,Nilkhant or equivalent as approved by GE.

S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia all as directed and specified by Engr in charge.

S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete.

S&F in repair Corner bracket golden colour suitable for drapery rod As per sample complete all as specified and directed by Engr-in-Charge.

S&F in repair knobs golden colour suitable ISI marked as per sample complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified.

S& F as in repair 15mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed

M&L 12mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs

M&L 19/20mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs

S&F continuous (Piano) hinges mild steel, powder coated, width of flaps 30mm

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distempering on walls with 1mm thick wall care putty complete all as specified and as directed.

Writing letters or figures (Block, Roman, italic or Indian) n exc 30 cms height.

Writing stops, commas, short lines dashes, hyphens, brackets, etc.

Removal and cleaning of vegetation, fungus, moss small trees etc from the roof top, chajja and removing spoils to a distance n.exc 100 m from the periphery of the single/Double story building.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed by Engr-in-charge.

M&L for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for one coat of synthetic enamel paint (1st grade quality) to old decorated wooden surfaces of any description ,not otherwise described over 10 cm width or girth incl preparation of surface complete.

M&L for one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of any description ,not otherwise described over 10 cm width or girth incl preparation of surface complete.

M&L for one coat of synthetic enamel paint (1st grade quality) to old decorated plastered surfaces of wall of any description ,not otherwise described over 10 cm width or girth incl preparation of surface complete.

M&L for one coat of white wash on old decorated surface of internal /External walls including preparation of surface by scrubbing down on steel wire brushing scrubbing down smokes spots moulds, moss and efflorescent salts and treating oil and greasy spots all as specified and directed.

M&L for one coat of white washing on old decorated ceiling surfaces incl preparation of surfaces.

M&L for two coat of white wash on old decorated surface of internal /External walls incl preparation of surface by scrubbing down on steel wire brushing scrubbing down smokes spots moulds, moss and efflorescent salts and treating oil and greasy spots all as specified and directed.

M&L for one coat of cement base paint to old decorated surfaces of wall incl preparation of surfaces complete all as specified and directed.

M&L for two coat of cement base paint to old decorated surfaces of wall incl preparation of surface & curing complete after complete removal/scarpping of existing treatment.

M&L for old painted surfaces of wall washing rubbing down and stopping of distembered surfaces on walls,removing nails making good holes cracks etc and applying one coat of oil bound distempering on walls with 1mm thick wall care putty incl preparation of surfaces.

M&L for old plastered surfaces of wall washing rubbing down and stopping of distembered surfaces on walls,removing nails making good holes cracks etc and applying two coat of oil bound distempering on walls with 1mm thick wall care putty incl preparation of surfaces.

M&L for old painted surfaces of wall at one coat of oil bound distempering incl preparation of surfaces as in ceiling .

M&L for one coat of exterior paint to old decorated surfaces of wall ,floor, interloking & chequred tile or incl preparation of surfaces complete all as specified and directed.

M&L for French polishing on surfaces of any description width or girth incl cleaning and preparation and polishing surface with one or more coat on old work, complete all as specified and directed.

M&L for Preparation of old painted concrete/plastered surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for Water based Road marking paint Viz., lines, Dashes etc on bituminous/ concrete surfaces not exceeding 15cm width or girth .

Note : FOR SL ITEM NO 1 TO 144 : ( a) The bidder shall note that one plumber and one helpers and one Mason and one helper and one Carpenter and one helper including T&P shall be made available at the Det office of the AGE B/R-II, CQAE(WE) Bangalore throughout the contract period against the fixing of elements covered under BOQ. The rate shall be deemed to be included in this provision in the quoted rate and nothing extra shall be entertained by the Govt on this account.

Sri Lakshmi Venkateswara Enterprises

M/S SRI BALAJI ENTERPRISES

RAMESH BABU CO

P K CONSTRUCTIONS

Lakkaiah Rangaswamy

Vinayaka Enterprises

ANAND REFRIGERATION