P/F FRP fencing work at various places at Karauli city (Phase-III)

Providing and Fixing of Fibre Reinforced Polymer/Plastic (FRP) Fencing for 11/0.4 KV transformers or 33 KV substations, comprising panels measuring 2.00 meters in height and up to 1.50 meters in length. The fencing shall be in yellow/green/pink/grey, as directed by the Engineer-in-Charge (EIC). The fencing includes vertical posts made of 50x50x4 mm hollow square sections with a height of 2.70 meters, grouted in 1:2:4 cement concrete (holdfasts and cement concrete paid separately). The spacing between vertical posts shall not exceed 1.5 meters and must be provided at all corners. The mesh consists of 24 mm outer diameter hollow cylindrical sections with a 3 mm thickness, placed vertically at 75 mm center-to-center intervals, and a horizontal 40x40mm hollow square section with a 3 mm thickness, all enclosed within a 40x40 mm hollow square pipe frame with a 3 mm thickness. The panels are secured to the vertical posts using stainless steel bolts. The fencing includes a single entry gate, with a height of 2.00 meters and a width up to 1.50 meters, as per site requirements, fitted with stainless steel hinges and aldrops. The gate must also feature a screen-printed nameplate with "JVVNL" and a danger sign on an SMC sheet. The vertical posts and panel sections to be manufactured using an automatic pultrusion process, incorporating at least 45% fiberglass reinforcement within a polyester-based thermoset resin. The material meets the following specifications: heat deflection temperature ≥170°C (IS:13411), self-extinguishing flame resistance (IS:4249), and non-melting characteristics (IS:13360), with a density ≥ 2000 kg/m³. The fencing must also be resistant to chemicals, have a high-gloss finish, and be weatherproof to ensure durability in various environmental conditions. The quality must ensure good fit and finish, with proper strength as per the direction of the EIC. The job includes all necessary loading, unloading, transportation, labor, tools, safety equipment, and installation with stainless steel bolts, clamps and fasteners (paid separately), completed as per the EIC’s direction. During installation, all safety protocols must be strictly followed, particularly when working near live electrical equipment. The mode of measurement for this fencing will be in the length of fencing per meter

Disposal of rubbish un-wanted material dismanted material away from site at appropirate place including all lead and lift, loading unloading, transportatoin labour etc. As per direction of Engineer in charges.

P/F stainless steel bolts 150mm long threaded at both sides for fastening members of FRP Fencing fastenend with washer and nuts at both side for extra strengthening of fencing wheever required and direction of E/I

Providing and fixing Ush ape MS Clamp 200mm long 50mm wide and 1mm thick with 2 holes to accomodate fasteners 65mm long along with 2 nos fastener of 65mm in length i/c all material, labour, T&P complete in all respect and direction of E/|

Supply stacking and spreading of graded crusher brocken hard stone aggregate fee from organic matter including stacking & spreading in yard / trenches as per the standard specification of size 40mm to 63 mm incl. all lead & lift, transportation, labour, loading, unloading & T&P required for gravelling work as per direction if Engineer in charge incl. dressing & leveling.

Re-arranging of cable loops of 33/11 KV i/c levelling of ground, for graveling and fencing work around transformer at various locations i/c shifting the cables using safety gears, gloves complete, Shifting work only to be done during shutdownand under the direction of E/1.