SPECIAL REPAIRS OF INTERNAL ROAD OF PM SHRI KV-2 MIRC AHMEDNAGAR UNDER GE (S) AHMEDNAGAR

Amount

Repairs to pot holes not exc 30mm deep and n' exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cu m of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm ® complete all as specified & directed.

Scarifying or picking gravelled, macadam or bituminous macadam surface in area n'exc 400 sqm exc 50 mm and n'exc 100 mm deep.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @ 7.50 Kg per 10 Sqm complete all as specified and directed.

M&L for premix bituminous macadam( consolidated thicknes 75mm or less) with 4 % binder content using paving bitumen of VG-30 grade by weight of total mix laid/rolled and compacted to required camber and gradient complete all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @2.50 Kg per 10 Sqm complete all as specified and directed.

M&L for Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.00% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen of penetration VG-30, layed to required camber and gradient with mechanical paver and rolled to a uniform smooth surface all as specified and directed

M & L for preparing bituminous surfaces of road and marking 2.00mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fix in repair solar cat eye alumnium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 1,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make: 3M/Green lite

S&F in repair Unbreakable 600mm dia convex mirror / security mirror/ traffic mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts) ISO Certified 9001:2015, mounted on 65mm x 65mm x 4mm hollow section and height of 2.10m upto top of the board above GL and inserted in PCC 1:2:4 type B-1 using 20mm graded coarse stone aggregates of size 0.3 x 0.3 m x 0..30m below GL , complete all as specified and directed by the Engr-in-chagre..

Supply and fixing in repair ABS plastic bumps/speed breakers in parabolic convex shape and of size 750mm X 250mm X 70mm made out of steady plastc, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, made with precoloured material (Black/Yellow) and UV stabilizer to keep perfectly colourful, studded with with reflectors on either side to make it clearly visible to motorists during night hours complete all as specifide and directed.

AMAR CONSTRUCTION (BID ID -3147839)