PROVN OF LIBERTY PADDOCK WITH GI PIPE ENCLOSURE AT CERTAIN PLACE OF NDA KHADAKWASLA UNDER GE (P) NDA KHADAKWASLA

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed by Engr-In-Charge.

Removal of excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed and deposited where directed at a level not exc 1.5m as directed.complete all as specified and directed by Engr-In-Charge.

M&L for Rolling and consolidating formation surfaces in cutting by power roller of capaity exc 8 tonne & n.exc. 12 tonne complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 (using 40mm graded aggregate) as in foundation, mass concrete.complete all as specified and directed by Engr-In-Charge.

M&L form work to sides of concrete foundation, footings, base of column, sides and soffit of plinth beam rough finished.complete all as specified and directed by Engr-In-Charge.

M&L TMT bars 10mm dia and over cut to length bent to shape required incl cranking, bending, spirally for columns hooking ends binding with mild steel wire (annealed) not less than 0.9mm dia.complete all as specified and directed by Engr-In-Charge.

M&L Ditto-but 5 mm dia and over as in stirrups spacers and binders.complete all as specified and directed by Engr-In-Charge.

M&L form work to sides of column rough finished.complete all as specified and directed by Engr-In-Charge.

S&F Gipe pipe 65 mm dia heay duty as in horizontal members for horse riding arena cut into required shape and size , welded , including necessary welding and finished at all sides , size of GI tubes heavy grade , approved make , including making holes to vertical RCC Column /band Hook and necessary welding to hole including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr-In-Charge.