SPL REPAIR OF P-03 (BASIC SHED) AT FARIDKOT MIL STN

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 Sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed.

S&F Powder coated Aluminium frame for doors, window/partitions/ventilator/sliding window with one or more rebates including joining cleat for fixing etc complete with Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge.

S&F Powder coated Aluminium window/ventilator shutter (glazed and gauzed both),side hung/sliding type, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium powder coated fitting such as peg stays 150mm long (01 nos) for each shutter, hinges type B-21 100mm long (02 Nos) for each shutter, suitable handle 100mm (01 No) for each shutter,100 mm tower bolt 02 Nos for each shutter and suitable handles, locking arrangement and rollers etc in sliding windowcomplete all as specified and directed. Note: Only Glass and wiremesh shall be measured and paid seperately.

Supply only Sheet glass 4 mm thick, ordinary quality/tinted in aluminium frame incl rubber beading and glazing complete all as specified and directed by Engr-in-charge.

Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm to be fixed in Aluminium window complete all as specified and directed by Engr-inCharge.

Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified.

S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm or 600x300x7mm thick set and jointed in readymade tile adhesive and pointed in white or colour cement to match including 15 mm thick rendering with readymix plaster mortar on any face of brick work complete all as specified as directed by Engr-in- Charge.

M&L Granite( green/black) (of any type) work 15 to 17 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all as specified

M&L, Machine cut kota stone slab flooring, cills 20-25mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.(single piece of Kota stone to be fixed in stair treads)