Internal repairs, replacement of aluminium door/ window and other minor modifications works and internal painting works in VS Bhavan and other locations in Anuhsaktinagar, Mumbai

Amount

ABSTRACT SHEET

PART A : MAIN ITEMS

Description of Work / Item(s)

Amount

PART A : MAIN ITEMS

Brick work in ready mix mortar of M/s. Roofit, M/s. Ultratech or equivalent of 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level, simultaneous pointing below ground level, curing, etc. complete all as per specifications & as directed by the Engineer-in-Charge.

a) In super structure at all floors and levels.

Demolishing brick /stone masonry in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & disposing of unserviceable materials out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specification & as directed by the Engineer-in-Charge.

a) Brick work.

b) PCC & RCC Concrete

Providing and fixing at all floors and levels machine cut machine polished natural granite stones as mentined below for Door windows framing in sandwitch form, flooring, dado, skirting, cladding etc and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing, cleaning of stone slabs, wastage, making cut outs wherever required, as per drawing & pattern including removing old floor,dado stacking serviceable materials and disposal of debris outside colony etc complete all as per specifications and as directed by Engineer in charge. Note :Exposed surface on Elevation & exposed vertical finished face shall be measured for payment in sqm. Overlapping & edges etc shall not be measured.

(a) 18 mm thick granite stone of steel grey, Lavender blue, brown or any other shade given by an architect for steps dado, skirting/cladding with stone slabs of various size in pattern including 12 mm thick 1:3 cement mortar bedding and applying Araldalite to the back of the Granite stone for fixing etc., complete as directed by Engineer-in-charge.

Supplying, fabricating and fixing in position at all floors factory made Aluminium sliding/top hung/fixed/ adjustable louvered windows, ventilators, boards with SS or sheet metal rivets/ screws joint of specified size, made of integrated bronze/ architect approved anodised finished (15micron thick) domal aluminium section (extruded) , of approved manufacutres for following types with extruded sections ofJindal / Indal / Aluminax or other approved equivalent make of approved sections with size and weights as directed for frames and shutters (including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/ glazing clips fixed with necessary Stainless Steel/ Sheet metal/ Bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frameand shutter, glass and depositing serviceable material to dept store and disposal of debris out side V S Bhavan at location identified by EIC etc all complete generally as per specifications etc, all as directed by Engineer in charge.

Providing and fixing aluminium grill 10mm thick DECO GRILLE make model no DG202 (Red colour) in approved colour anodising of Min 15 mircon with a opening size of 60mm X 45mm and minimum weight of 4.282 kg/Sqm including providing and fixing suitable F & H frame section outer frame and mullion fixing with screw, double tubular necessary scaffolding complete. all as per specification and as directed at site by the Enginer-in-Charge (Aluminum alloy shall be of 6063-T6 with yeild strength of 6.5Kg/Sqm). If there is any requirement for opening within decogrill, the same shall be provided without any extra cost.

Providing & fixing ordinary plain / frosted / Bajara sheet glass of M/s. Modiguard / Saint Gobain or other approved make of following thickness in various sizes as required at site, fixing to doors/ windows/ louvers, partitions, vision panels, doors etc. using first class oil puttyof approved quality and make including supplying & fixing glazing pins, teak wood or aluminium beading with necessary screws, ss nails etc. at all floors & locations including cutting the glass to required size, removing the existing broken /damaged glass panes from windows / doors / partitions etc. and disposing off the un-serviceable material out side VSB premises including wastage in cutting, transportation etc. complete all as directed by the Engineer-in-charge .

a) 6 mm thick plain sheet glass.

b) 5 mm thick Bajra sheet glass.

Providing and Fixing 12mm thick Toughened glass shutter in partition, leaf/ sliding door make of M/s Modiguard/ saint Gobain or other approved equivalent including providing and fixing necessary SS dept approved patch fittings make of M/s Dorma or equivalent to be fixed at top & bottom movement etc., EPDM gasket/Neoprane gasket cutting, wastage including disposal of debris out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specifications and as directed by the EIC (Note :- Only the clear opening of glass shall be measured for payment) The Aluminium snap beading if required for work shall be measured and paid under relevant item.

Providing and fixing of 25 micron thick non reflective, reflective, one way, two way type sun control film of M/s. Garware or approved equivalent make, for windows, doors glasses etc including cutting to size, pattern, fixed with solution etc. including cleaning the glass, disposal of debris of outside colony etc all complete all as per specifications and as directed by Engineer in Charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315 ( Make of Hardwyn or Dorma), having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-Charge.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of waterto make it watertight including checking of all the structural and functionaldesign. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shadesmade out of 4mm thick aluminium composite panel material consisting of3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon basedfluoropolymer resin coating of approved colour and shade on face # 1 andpolymer (Service) coating on face # 2 as specified using stainless steelscrews, nuts, bolts, washers, cleats, weather silicone sealant, backer rodsetc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot DipGalvanised with serrations and serrated washers to arrest the wind loadmovement, fasteners, SS 316 Pins and anchor bolts of approved make inSS 316, Nylon separators to prevent bi-metallic contacts all completerequired to perform as per specification and drawing The item includescost of all material & labour component, the cost of all mock ups at site,cost of all samples of the individual components for testing in an approvedlaboratory, field tests on the assembled working curtain wall with aluminiumcomposite panel cladding, cleaning and protection of the curtain wall withaluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics allcomplete , as per the Architectural drawings, as per item description, asspecified, as per the approved shop drawings and as directed by theEngineer-in-Charge. However, for the purpose of payment, only the actualarea on the external face of the curtain wall with Aluminum CompositePanel Cladding (including width of groove groove) shall be measured in sqm. up to two decimal places.

Providing and fixing strips as specified below in joints of flooring, tread of steps by cutting, grooving & pasting by solution etc. as per the approved pattern/ drawing, spacing including levelling, polishing, finishing etc. complete as directed by Engineer in charge.

3 x 8 mm Brass strip

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Cement plastering 15mm thick using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with pop over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification etc. and it also includes removing of existing damaged/ worn out/ loose plastering and disposing off outside V S Bhavan premises within Anushakti Nagar at location identified by EIC etc. complete all as per specifications and as directed by EIC.

Distempering with two coats of approved paint make of M/s. Asian or Dulux or equivalent of acrylic oil bound distemper (Premium quality paint) of approved shade and make over one coat of approved cement primer incuding preparing the surfaces, completly removal of old paint & neeru, sand papering, complete filling the wall surface with M/s. Birla wall care approved make putty till smooth finish & matching the line & level of wall surface in plum including scaffolding, all necessary tools tackles, moving furniture, cleaning of colour stains on furniture, floors, doors & windows etc. all as per manufacturer specifications and as directed by the Engineer-in-Charge.

Providing & laying flooring / skirting with antiskid Vitrified tiles of first quality Endura of M/S H&R JOHNSON (INDIA) Ltd or M/s. Pavit or as approved equivalant of size 600 x 600 x 10mm & 15/16mm thick in required pattern and combination of series & Colour or as per manufacturer's specifications, laid directly over tile using polymer cum cement based adhesive manufactured by Roffe construction – NSA (non skid adhesive) or M/s Ardex Endura chemicals– Gold star or other approved equivalent make/removing existing flooring and fixing new flooring using 20 mm thick c.m. bedding with necessary cement slurry of required consistency under and over cement mortar bedding in respect of flooring and fixed over 12 mm thick backing cement mortar 1:4 (Using factory made Ready Mix Mortar only) in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out wherever necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing, etc. complete all as per specification, drawings, relevent IS code & as directed by the Engineer-in-charge.

a)In flooring with 600 X 600 X 10mm or as specified

b)In dado / Skirting Tiles of size as specified in 10mm thick including removing existing entire paint, plaster upto the brick work/concrete surfaces and new replastering in CM 1:4 (using factory made ready mix mortar only) and fixing of dado tile with polymer cum cement based adhesive as mentioned above.

Providing and laying at all floors and levels Vitrified tiles of first quality Marbonite of M/S H&R JOHNSON (INDIA) Ltd or other equivalent approved make of approved colour, shade, pattern and of 8/8.5mm thickness or as per manufacture's specifications, and fixed over 12 mm thick backing cement mortar 1:3 in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including dismantling the existing with bedding / backing mortar, cutting of tiles, making openings / cut out where necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing, etc. complete all as per specification, relevent IS code & as directed by the EIC.

a)In Dado / skirting / Riser with tiles of required size 600 x 600 x 8.5 mm tile similar to Salt & Pepper (White) of M/s H& R Johnson (I) ltd or approved laid over 12 mm thick CM 1:4 (Using factory made pre mix/ready mix mortar only) backing, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting etc. complete, including dismantling the existing dado/skirting tile and backing cement mortar, disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per specification & as directed by the Engineer- in- Charge.

Providing and laying at all floors and levels 6mm.(min.) thick or as per specifications of approved manufactuer first quality matt/ glass finished vitrified tile for dado/ cladding as per the approved pattern and colour as mentioned below of M/s H . R Johnson (I)Ltd. laid in cement mortar bedding / backing, close jointed and grouted with matching cement slurry to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/ cutout if necessary, wastage and final cleaning of surfaces as required, curing etc. complete all as per drawings, specifications & as directed by Engineer in Charge.

In skirting/ dado/ clading of tile Digital Collection series of 300x600 mm size with approve colour and design/ pattern etc. tile laid over 12 mm thick CM 1:3 (1cement :3 sand) backing.

Polishing in high gloss/matt finish Melamine polish on wood work in required color/wooden shade texture with following process in the sequence as detailed : 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing of flat machine pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS: 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete all as per the direction of Engineer- in- Charge.

a) 12 mm thick.

Providing and fixing Mortice lock of 6 levers, chromium-plated brass parts, and body of Godrej 7117, 200mm handle set lock body, CK mortice lock with chromium-plated brass screws, etc. The lock shall be fitted as per the manufacturer specifications, complete, and as directed by E.I.C. (Note: i) The lock shall be suitable for door thicknesses of 25 mm to 50 mm. ii) If any of the locks are found to be defective, they need to be replaced immediately).

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality in extruded aluminium section door of M/s. Shalimar or equivalent, with all necessary screws, straps, fittings etc. complete as per direction of Engineer- in-charge.

Providing and fixing at site of approved quality non magnetic stainless steel 304 Hinges make of M/s. Shalimar, M/s Cotswold, M/s. Ebco or equivalent & as suggested by EIC, fixtures and fasteners along with necessary SS Screws, bolts, nuts, washers etc as per approved samples etc complete as per specifications and as directed by E I C.

a) Stainless steel butt hinges (Premium) 125x75x3.0mm

b) Stainless steel side hung friction hinges in size of 12" to 16" as per requirements

Providing & fixing of Brass handle of M/s. Shalimar having size of 10" long & fixed at a standard height from lower level of door with ss screws etc. with all necessary fittings & fixture complete. All as directed by EIC.

Providing & fixing 12 mm thick Bison panel at all floors & locations including fixing the sheet to existing wooden/ M.S./ aluminium frame work with necessary SS screws, forming grooves as required sizes making necessary openings/ cut outs around electrical fixtures A.C. grills & trap doors fixing to correct lines and levels with beading, scaffolding etc. complete all as directed bythe Engineer-in-Charge. (Note: All the joints of bison panel sheets in partition works shall be fixed or sealed with woven tape with the necessary waterproof glue.).

Supplying & fixing matt finished, concelaed type anodised aluminium 200 mm long tower bolt heavy quality fittings, fixtures and fastenings of approved quality, along with CP brass screws, bolts and other accessories as per approved samples. complete all as per specifications and as directed by Engineer-in-charge

Supplying & fixing in position the 30-40 mm thick solid core block board flush door (including making neccesary arrangements for vision panel) shutters with BWP ply on both side conforming to IS 710 with external type teak wood lipping of section 30 x 20 mm/40 x 20 mm alround, fixing shutters in position to pressed steel door frames/wooden frames at all floors by cutting / planning if necessary, including supplying & fixing heavy duty MS oxidised hinges including cost of fixing the fittings, approved laminating the shutter both sides with necessary adhesives of approved make & colour etc. including removing the old damaged shutter and transporting to Deptt. stores all as per specifications, & as directed by Engineer-in-charge. ( Note: Hinges, Mortice lock, glass fro vision panel & Lamination will be paid under relevent Items)

b) For Door 40 mm thick

Providing and fixing second class teak wood in frames of required sections for doors, windows, wall panelling decorative framing, ventilators, clear storey window, partition, railing, battens & rafters etc. wrought framed and fixed in position including providing and fixing M.S. hold fasts / screws of suitable size including applying one coat of approved wood primer etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing & fixing wall panelling at all floors & locations consisting of following thickness water proof Marine ply wood conforming to IS 710 & with 3 mm thick teak wood veneer fixed on 2nd class teak wood frame work on walls including suitable SS screws of required size and including providing 3 mm wide grooves between veneer panels of different shades (dark & light colour) including providing & fixing half round teak wood beading wherever required including scaffolding, tools, screws, rawl plug, making cutouts for electrical fittings & fixtures with shutters, handles, hinges and including disposal of out side V S Bhavan at location identified by EIC etc. complete all as per specifications and pattern as directed by the Engineer-in-Charge. Note:- 2nd Class teak wood frame work shall be paid under relevant item.

(a) 19 mm thick marine Ply

(b) 12 mm thick marine Ply

(c) 8mm thick marine ply

Providing and fixing 1.0 mm thick decorative laminated sheet of plain /wood grain in gloss / matt finish of approved make with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality, cutting, wastage including disposal out side V S Bhavan at location identified by EIC etc. complete all as per specifications and as directed by the EIC.

Providing & fixing Hydraulic door closure conforming to IS:3564 of heavy duty (80 Kg capacity) with fittings and fixtures , necessary screws/bolts and other accessories as per approved sample including removing the existing old & damaged Door closure with out any damage to the property and submitting the same to the DCSE store etc complete all as directed by the Engineer-in-Charge.

a) Hydraulic door closer of Godrej, Dorma or approved equivalent (Right/ Left type)

Supplying only heavy duty superior quality matt finished anodised (anodic coating not less than Grade AC10 as per IS 1868) ISI marked aluminium /SS fittings and fixtures and fasteners along with necessary CP screws, bolts,nuts, washers etc. as per approved samples. etc. complete all as directed by the Engineer-in-charge.

a) Door stoppers double legged with rubber bush

Omkareshwar Construction

Omkareshwar Construction