Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | ₹1.5 L Quoted ₹1.3 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹1.3 LRejected-Finance | ₹1.3 L | L2 | Rejected-Finance L2 |
| 3 | L3₹1.3 LRejected-Finance S M BOSE ROAD PANIHATI KOLKATA 700109 | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700109 | ₹1.3 L | L3 | Rejected-Finance L3 |
Tender Value
₹1.5 L
EMD Value
₹3,000
Closing Date
13 Feb 2026, 10:00 amClosed
EXECUTIVE ENGINEER LIGHTING
79 Bidhan Sarani Kolkata-700006
REPAIRING AND REPLACEMENT OF STREET LIGHTING SYSTEM AT BEERPARA LANE, RANI DEBENDRABALA ROAD AND OTHER PLACES IN WARD NO-4 UNDER BR-1
2026_KMC_1001189_1
KMC/LTG/Z1/BR1/WD4/19/25-26
Open Tender
Electrical Work/ Equipment
20 days
BEERPARA
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹3,000
9 Mar 2026
7 Feb 2026
13 Feb 2026
7 Feb 2026
13 Feb 2026
7 Feb 2026
SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION - REPAIR 14. Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface,Ioading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km
SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION - REPAIR 15. Dismantling of OH line comprising of copper/AAC/ACSR conductor, cross arms / ”D... iron clamps / brackets / ”V... brackets etc. insulators, earthwire, cradle guard, safety devices, staywire etc., incl. sorting out, rolling the conductors, stacking, loading at site and delivering, unloading , measuring the conductors, sorting, stacking properly at any place as per direction upto a lead of 1.6 km (a) OH line comprising of single phase, neutral & earth wire
Removing of luminaries with lamp from the pole/column and keeping them ready for dispatch as per direction of EIC: HPMV/HPSV luminaries/MH/LED street light fittings.
Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm X10mm MS flat support/or by other means as required
SCHEDULE OF RATES FOR OH LINE INSTALLATION (LT DISTRIBUTION).Erection of Poles.Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyUpto 9.0 mtr. Size 0.6x0.6x1.70 mts
Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/HaveIIs/PoIycab).10sqmm x 4core
Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing
Drawing of unarmoured cable of suitable size (supply of cable is not included in the scope)on existing Galvanized stranded wire for centenary system with reel insulators and binding wires.
SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe.
SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Soil Excavation.Excavation of soil FOR installation of Earth Electrode and filling & ramming.FOR Morrum Soil.
SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION - REPAIR 13. Providing CC (6:3:1) mulling 450x450x600 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable mulling if any incl. fixing only loop box if necessary (a) Without Loop Box
S/F SINTEX 2(BOTTOM SIDE) AND 2(TOP SIDE),FRP(FIBRE REINFORCED PLASTIC) WHITE WATERPROOF FR RECTANGLE SHAPE SINTEX LOOPING CABLE BOX (GSJB 3020), POLE MOUNTING, OF SIZE HEIGHT-300MM,WIDTH-200MM, DEPTH-125MM, MATERIAL SHEET THICKNESS 4MM, 500 GMS, 2 WAY(BOTTOM SIDE),2(TOP SIDE) INSULATION RESISTANCE GREATER THAN 200 MEGAOHMS, IP66(AS PER IS/IEC 60529:2001 LATEST), 4 NOS TERMINAL CONNECTOR,HAVING VOLTAGE GRADE OF TERMINAL BLOCK 1100V, 50 HZ, AC, FIRE RETARDANT CLASS-FV-0(AS PER IS:11731 PART-II), FLAME PROOF,IIA,T6 TEMP. CLASS(AS PER IS/IEC 60079-0 & 1:2007 LATEST), NO, WITH ONE NUMBER SP MCB MOUNTED INSIDE THE BOX, ONE COMPRESSION TYPE BRASS CABLE GLAND FOR UPTO 4 CORE 16 SQMM PVC/A CABLE, FRONT COVER WITH 4 NOS OF FASTNERS WITH RETAINERS (STAINELESS STEEL 304 GR.) AS PER RATE OBTAINED FROM GEM PORTAL
Fixing only TPN MCBDB in Sheet Steel enclosure (4 to 12 way) on flat iron frame on wall 415V TP/TPN
Outdoor Lighting Installation, Steel Tubular Pole/ M.S Pipe/ G.I. Pipe, Pole CAP etc. Supplying & Fixing of G.I pole cap for suitable size
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.(i)1st coat of aluminium paint over 1 coat of RO priming
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.ii2nd coat of aluminium paint over 1st coat
Supply and Fixing of fuse unit complete with base and bridge on existing Board and necessary connection, for the following range.60 Amp. / 63 Amp., 415 V
SUPPLY, INSTALLATION & COMMISSIONING OF FINDER MAKE 3 PHASE TWO PORT INDOOR SURGE PROTECTOR PANEL WITH THE FOLLOWING SPECIFICATIONS , AS PER IS 16463(PART 11): 2016 OR IEC 61643-11 : 2011, RMS MAXIMUM CONTINUOUS OPERATING VOLTAGE 320 V, IP-20, UPTO 1.5 KV VOLTAGE PROTECTION LEVEL, CLASS I + CLASS II ACCURACY COMES WITH MINIMUM 2 YEARS WARRANTY PERIOD AS PER THE RATE OBTAINED FROM GEM PORTAL
Supplying and Drawing 1.1 KV single core stranded 'FR’ PVC insulated & unsheathed single core stranded copper wire (Brand(approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm)
A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 124. 40mm GI pipe
Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/HaveIIs/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 25 7/2.24 4
Laying through Underground Trech.(a)Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed
Laying through RCC/Hume/GI Pipe.(a)Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench FOR single, 2, 3, 3... & 4 core
Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of(approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint (a) 1st coat of aluminium paint over one coat of RO priming
Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of(approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint (b) 2nd coat of aluminium paint over 1st coat
Erection of Galv. (HOT Dip) Cross arms/ ”D... Iron Clamp8).M Supplying & Erection of Galv. ”D... iron complete with suitable pole clamp 100mmx114mm porcelain shackle insulator & 19 mm dia Galv. bolts & nuts. incl. painting
SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION - REPAIR 6. Replacing Galv. (Hot Dip) MS earth clamp 380x40x6 mm size complete with bolts and nuts etc. as required on pole (as per specification) FOR fastening stay wire incl. painting
A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 145. Galv. Straining screw 12"x5/8” dia
Installation the feeder pillar box only on cement brick foundation including plastering and neat cementing as per specification and direction of E.I.C. b) For medium size feeder pillar box.
Sub Total
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.10 MB
BOQ_2453270.xls
BOQ • 0.37 MB
ETECHBID.pdf
Tender Documents • 0.66 MB
OTHER.pdf
Additional Documents • 0.08 MB
Download all tender documents and submit your bid