Extension of Main Building, Construction of Servant Quarter, Septic Tank and other Works at Senior Officer Residence No.-3 at Dindayal Nagar, Ranchi

Amount

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Edges of slabs and breaks in floors and walls

Under 20 cm wide

Weather shade, Chajjas, corbels etc., including edges

Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing chromium plated brass handles with necessary screws etc. complete:

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Double charge vitrified tile polished finish of size

Size of Tile 600 x 1200 mm

Glazed vitrified floor tiles polished finish of size

Size of Tile 600 x 1200 mm

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Toughened glass 12 mm thickness

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying vitrified Paring / Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 4457:2007, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300 x 10 mm sizes.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand):

25mm thick

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red

Area of slab upto 0.50 sqm

Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite Work

Providing and laying 25mm thick white makrana marble tiles in risers of steps, skirting and pillers of approved quality over 12mm thick base of cement mortar (1:3) and jointed with white cement slurry including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

With "A" grade white 15X15cm Tiles.

8 mm thick (mirror polished tiles machine cut edge) Raj Nagar white

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for(i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3(ii) Sites with structure height more than 20m for all wind speeds

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.

Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I):2011 (Board with BIS certification marks)

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75mm dia

110mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single pushfit Couple

75mm dia

110mm dia

Single tee with door

75mm dia

110mm dia

Single tee without door

75mm dia

110mm dia

75mm dia

110mm dia

Shoe (Plain)

75mm dia

110mm dia

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

75mm dia

110mm dia

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

Kitchen sink with drain board

510x1040 mm bowl depth 250 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.

20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work

25 mm nominal dia Pipes

32 mm nominal dia Pipes

40 mm nominal dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Supply fitting and fixing vitreous white Glazed earthen ware I W C of Parry, Hindwareny eather I S S Approve Make. (A)580mm long. © With10Lit. Low Level PVC Cistern

Providing Fitting and fixing viterous white glazed ware wash basin do - do

Special type C.P. Bath room Fitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent)

pillar cock (long neck)

bib cock long thread V.I.P

Angular Stop Cock

Telephone shower with flexible pipe

Wall Mixer 3 in 1 System with provision

Towel rail 24"

soap dish

Providing and fixing lead connection pipe with heavy brass coupling 2 nos at both ends

15mm doa and 45 cm long

supplying fitting and fixing the following items complete with all material do - do

600mm x 450mm size

Carriage of matarials

Sand - 8km

Bricks - 8km (1k + 7p)

Chips - 22 km

Local Sand - 3 km

Metal

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.

Group-C

Twin Control Point Wiring in PVC Conduit, with Modular type Switch: Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch, modular plate, suitable size of GI box etc as required.

Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.

Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5 Sqmm + 1x1.5 sqmm earth wire(for Single Separate 5A from nearest switch board )

2x2.5 Sqmm + 1x2.5 sqmm earth wire (for switch board circuit to LDB and UPS 6 A Sockets Circuit).

2x4.0 Sq.mm + 1x4.0 Sq.mm earth wire. (AC & GYZER)

2x6 Sqmm + 1x6 sqmm earth wire

4x6 Sqmm +2x6 sqmm earth wire.(to be used for all LDB)

4x10 Sqmm +2x10 sqmm earth wire.(to be used for all PDB)

1 x 1.5 sq.mm

Telephone Wiring in Existing Conduit:- Supplying and drawing, following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required.

Supply and drawing of co-axial TV Cable RG-6 grade, 0.7 mm. Solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed conduit PVC as required. Make:- Finolex / Batra Henley / Lapp

S/F PVC Conduit: Supplying and fixing of following sizes of Rigid 2 mm thick PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for TV and TEL out lets.

S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. (to be used in switch board with sockets)

5/6 amps, one way modular switch

15/16 amps, one way modular Switch

5/6 amps, 3 pin modular socket

6/16 amps, 6 pin modular socket

S/F Modular type electronic fan regulator:- Supplying and fixing stepped (two module) type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F Modular blanking plate:- Supplying and fixing of the existing modular plate and switch box excluding modular plate etc, as required.

S/F Modular boxes, base and cover plate:-

Supplying and fixing following size /modules G.I. box along with modular base and cover plate for modular switches in recess etc. as required Make:- Legrand/Schneider/MK Blenz.

1 or 2 modules (78mmx78mmx45mm)

4 or 5 modules (78mmx140mmx50mm)

S/F light plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required.

S/F power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.

S/F Modular Computer board cosisting switch & socket in 6 modular board etc as per required

1.24.3 15/ 16 amps, one way switch 2 X102=204 1.24.5 15/16 amps, 6 pin socket outlet 2 X 145=145 1.27.3 6 module box 1X240=240

S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.

S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required.

S/F Electonic Musical Call Bell:- Supplying and fixing electronic musical call bell suitable for D.C./A.C. single phase, 230Volts, complete etc as required.

ITC fluorescent fitting with down rods:- Installation, testing and commissioning of Pre-wired fluorescent fitting /compact fluorescent fitting /2x20W LED Tube light of all types, complete with all accessories and tube etc.directly on surace or ceiling/ wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor, single core cable and earthing including supplying and fixing ball & socket arrangement, 2 No. down roads of 20 mm dia x 1.6 mm thick steel conduit (up to 30 cm lenght), painting & wiring the down rods with 1.5 sq.mm. PVC Cu. conductor sinlge core cable and earthing etc. as required.

S/F Extra Down Rod:- Providing and fixing extra conduit down rod of 20 mm dia, 2x10 cm, length with 2x1.5 Sq.mm FR PVC insulated copper conductor, single core cable including painting etc. as required. (Note more than 5 Cm. length shall be rounded to the nearest 1) (Extra Down Rod For Ceiling Fan)

ITC Ceiling Fan :- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required.

S/F SP MCB DB:- Supplying and fixing following way, SP&N MCB distribution board of sheet steel for 240 Volts on surface /recess complete with tinned copper bus bar, neutral busbar, earth bar, detachable gland plate, interconnections, phophatized and powder coated painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR). Make- L&T/Legrand/ Schneider.

8Way Double Door.

12Way Double Door.

16Way Double Door.

S/F TP MCB DB: Supplying and fixing following way,three pole and neutral sheet MCB distribution board, 415 volts on surface/recess complete with tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections,phosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR). Make- L&T/Legrand/ Schneider.

4 ways (4+12) Double Door. (horizontal type)

6 ways (4+18) Double Door. (horizontal type)

S/F 'C' series MCB:- Supplying and fixing 240/415 V, 10 kA, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.

6/32A Single Pole

6-32 A DP MCB

6-32A TPN MCB (To use as incomer for all LDB)

50/63A TPN (To use as incommer for all TPN D.B.)

S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.

S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required.

S/L 6 SWG G.I. Wire :- Supplying and laying of 6 SWG G. I. Wire at 0.50 Mtrs. Below ground level or along the wall for conductor earth electrode, including soldering etc, as required.(for running earthing DB to Panel)

P/F 25 x 5mm G.I. earth strip in surface/recess :- Providing and fixing 25mmx5mm G.I. earth strip in surface /recess for connections etc. as required and making the earth grid for all G.I. Earthing pits of the building.

S/L 6 SWG G.I. Wire :- Supplying and laying of 6 SWG G. I. Wire at 0.50 Mtrs. Below ground level or along the wall for conductor earth electrode, including soldering etc, as required.(for running earthing DB to Panel)

P/F 25 x 5mm G.I. earth strip in surface/recess :- Providing and fixing 25mmx5mm G.I. earth strip in surface /recess for connections etc. as required and making the earth grid for all G.I. Earthing pits of the building.

Providing and fixing of PVC/XLPE indulated PVC sheathed heavy duty, aluminium armoured cable of grade 1.1KV as per IS 1554 (Part-1), etc. as required. Make:- Havells / Finolex / Polycab/ KEI.

2 Core 6 Sq. mm XLPE Al. Ar. Cable 1.1kV.

2 Core 10 Sq. mm XLPE Al. Ar. Cable 1.1kV.

3.5 Core 25 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

3.5 Core 35 Sq.mm. XLPE Al. Ar. Cable 1.1kV.

4 Core 10 Sq. mm XLPE Al. Ar. Cable 1.1kV.

MV Cable Laying up to 25 sq. mm. in ground :- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm. direct in ground including excavation, sand cushioning, protective coveringand refilling the trench etc as required.

MV Cable Laying up to 120 sq. mm. in ground :- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size exceeding 35 sq.mm. but not exceeding 95 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

2 Core 6 Sq. mm 1.1kV (19mm)

2 Core 10 Sq. mm 1.1kV (19mm)

4 Core 10 Sq. mm 1.1kV (19mm)

3.5 Core 25 Sq. mm. (28mm)

3.5 Core 35 Sq. mm. (32mm)

S.I.T.C of flowing ratting LEDStreet lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection ) in existing pole /pipe for supply voltage 100-270V AC ,50Hz .Luminarie shall be confirm to IS : :10322 part-5 /section -3 and shall be complete with all necessary accessories as required.

25W LED STREET LIGHT

20/22W LED TUBE LIGHT

supply installation ,testing and commissioning of folowing size ceilling fan 3 blades confirming to is : 374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq mm fr pvc insulated ,copper wire suitable for 230v 50hz ,single phase supply etc ,complete as required .

1400mm (56") BLDC 5star rating 32W ceiling fan

S.I.T.C of flowing ratting recess /surface mounting LED round /square shape Down light luminarie with pressure die cast housing for single phase supply voltage .Luminarie shall be confirm to IS :10322 part-5 /section -2 or IEC :62722 with all necessary accessories as required.

12W LED Round Down light

15/16 W LED Round Down light

18/20W LED Square Down light

2x8w Led outdoor Up-down light with ip:65 protection die cast aluminium housing

LED strip light 24volts DC with IP:65 rated in different colours of lenth 5mtr and power 5w per mtr including driver 1s:10322 part 5/ section 7

1.5 tr 5 star splite A.C (inverter Type )is 1391 part (Dakin, Hitachi .L.G or Equi)

2.0 tr 5 star splite A.C (inverter Type )is 1391 part (Dakin, Hitachi .L.G or Equi)

Modular type Ac Starter switch of single phase 230v/50hz of capicity 20/25 amp

5 kva wall mounted automatic volatage sabilzer from range 140vto 280v

cpper tube of size 1/2" for splite ac unit 1/1 5/2/3 tr capacity including nitride rubber do - do

sitc drain water pipe insulation 20mm

FR PVC INSULATED 3coer 4 sqmm copper .wire

Outdoor stand for 2.0tr splite Ac

NON SCHEDULE ITEMS Providing and fixing 30mm door shutter wooden framed by both side best quality ply and 4 mm thick Veneer both side pasting finishing with melamine polish all material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Providing & Fixing of modular kitchen cup board of steel rack hing basket with ply facing provision of all fitting of modular kitchen do -do

S/F/F upper head Cabinet ,or File Cabinet Laminate Finish including all materials, labour , taxes all complete as per building specification and direction of E/I.

Providing & Fixing Chaukhats Panneling with wooden framed by 12mm thick both side best quality Plyand 4 mm thick Veneer both side pasting finishing with melamine polish all materials and labour all complete as per buildings specification and direction of E/I.

S/F/F Wardrobe Cabinet Veneer Finish including all materials, labour , taxes all complete as per building specification and direction of E/I.

Providing Fitting and Fixing Tensile Memrane Fabric Providing fabrication asembling and erection of pre stressed tensile membrane fabric structure in desired profile as per drawing with nonopolymered flurinated lacquer system on both side warranty period will be for 15 years the work will be carried out as per direction on Engineer in Charge

Structural Steel Work Providing Fabrication Assembling Painting ,Hosting Erecting and Placing in Postion MS built up section / Tubular strcture (MS Built up section ) Rolled Section & Plate Confirming to IS 2062 Minimum Required Grade E240 Tubular Structure Made from Steel Hollw Section From Apollo /Jindal/ Bhusan ISI mark & Equivalent

Supply fitting & Fixing Six Seater Dining Table Italian top Art Marble Dining set The modern design is made using cool textured Italian table top with designer solid wood base.

Supply fitting & Fixing Three seater Sofa With Fabric Cover stitching and unique chrome legs as per Direction of E/I .

Supply fitting & Fixing Side Table Italian top With Rose Gold Finish Lag do complete job. as per Direction of E/I .

Supply fitting & Fixing bed. Ply with veneer and high glossy polished including all complet job with nesesarry nail & hing.Supply With Head Board ply,teak veneer, Decorative type raxin steeching all complet job. as per Direction of E/I .

Supply & Fixing Center Table Metal Base with Veneer & Italian Top do complete job. as per Direction of E/I .

Supply fitting & Fixing Two seater Sofa With Fabric Cover stitching and unique chrome legs. as per Direction of E/I .

Supply fitting & Fixing Our Smart TV Sony 139cm (55") Model No KD-55X82L as per Direction of E/I .

Supply Fitting & Fixing Carpets 6 feet X 4 feet as per Direction of E/I .

Supply Fitting & Fixing Bosch Freestanding Dishwasher Model No SMS6ZCW42E as per Direction of E/I .

Supply Fitting & Fixing Bosch Domino induction hob 30cm black surface mount with frame PIB375FB5I

Supply Fitting & Fixing Bosch Built in oven 60x60 cm stainless steel do -do HBA574BR0

Supply Fitting & Fixing Bosch 60*cm Wall mounted chimney Touch controls Motor power: 350 W Very high suction power 2 high efficient mesh filters Max. noise level: 55 - 73 dB Touch controls for 3 fan speed intensive mode Model no DWK068G60I Appliance dimensions (HxWxD): 500 x 598 x 480 mm

Supply Fitting & Fixing Samsung Refrigerator Side by Side RS78CG8543SL 633L

Supplying Fitting and Fixing Outdoor seating set 4 Chair and 1 Table Round Shape do - do

Supplying Fitting and Fixing Wooden Single Bed without storage box

Supplying fitting and Fixing Round Glass Flower Pots Or Plant

Supplying fitting and Fixing Stainless Steel Swing Type Dustbin

Providing Fitting and Fixing LED Bathroom Mirror | Dimmable Lights | Wall-Mounted Vanity Mirror with 3 in 1 Color Led Light | 30 x 30 Inches

Concealed Body For Single Lever High Flow Diverter with Button Assembly But Without Exposed Parts Model no ALD-079N

Single Lever Exposed Parts Kit of Hi Flow Diverter Consisting Operating Lever Cartridge Sleeve Wall Flange (With Seals) & Button Assembly Sleeve & Button (Compatible with (ALD-079N) Model no -FLR-5079NK

Bathtub Spot with Button Attachment For Hand Shower with Wall Flange Model no SPJ-15463PM

Hand Shower 105mm Round Shape Multi Flow With Air Effect (Abs Body & Face plate chrome plated) With Rubit Cleaning System Model no HSH - 1721

Flexible Tube 8mm dia & 1.5M Long with Nuts Model no SHA-549D8

Premium Wall Bracket for Hand Shower 35mm & 100 mm long Round Shape Model no SHA-555 as per Direction of E/I .

Overhead Shower 240x240mm Model no -OHS-CHR-1629 as per Direction of E/I .

Shower Arm 200x25x25mm Square Shape for Ceiling Mounted Shower with Flange Model no - SHA-457L200 as per Direction of E/I .

Wall Hung WC with UF soft Close seat cover Hinges Accessories Set Size 380x520x365mm Model no ACS-WHT-87953BIUF as per Direction of E/I .

Single Piece slim concealed cistern with Floor Mounting Frame Installation Kit and "S-Type " Drain Pipe Connection Set for Wall Hung WC (Without Flush Control plate Model no JCS-WHT-2400FS as per Direction of E/I .

Control Plate Kubix Model no JCP-CHR-352415 as per Direction of E/I .

2 Way Bib cock with Wall Flange Model no ALI-85041 as per Direction of E/I .

Hand Shower (Health Faucet ) with 1 .2 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook Model no ALD-573 as per Direction of E/I .

Angular stop cock Model no ALI-85053 as per Direction of E/I .

Waste Coupling 32mm Size Half Thread with 80mm height Model no ALD-727 as per Direction of E/I .

600mm Long Braided Hose with M10X1 Nipple 15mm Nut O-Ring & Rubber Washer(Suitabl for Tall Boy Basin Mixers) Model no ALD-801B as per Direction of E/I .

Counter Top Basin Model no ALS-WHT-85601 as per Direction of E/I .

Single Lever Tall Boy With 125mm Extension Body Fixed Spout Without Popup Waste systern with 600mm Long Braided Hoses Model no ALI-85005B as per Direction of E/I .

Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & wall Flange Model no-ALD769L300X190 as per Direction of E/I .

Single Lever Sink Mixer with Swinging Spout on Upper Side (wall Mounted Model) Model no FUS-29165 as per Direction of E/I .

Towel Rack with Lower Hanger Model no AHS-1581H as per Direction of E/I .

Soap Dish Model no AQN-7731 as per Direction of E/I .

Soap Dispenser with Glass Bottle Model no AKP-35735P as per Direction of E/I .

Towel Ring Square Model no AKP-35721P as per Direction of E/I .

Tumbler Holder Model no AKP-35741P as per Direction of E/I .

Toilet Roll Holder Stainless Steel Flap Model no ACN-1153S as per Direction of E/I .

Water Heater 25Ltr Model ELENA as per Direction of E/I .

Water Heater 6Ltr Model ELENA as per Direction of E/I .

Rack Bolt For WC Model no ZPS-SNS-RB01 as per Direction of E/I .

Supplying Fitting And Fixing 2.0 ton One Way Cassette Ac make (Mitsubishi,LG,Daikin) as per Direction of E/I .

Add 18 % GST

Add 1% Labour Cess

Ms Gokul Construction (BID ID -633610)