Repair to wooden and steel furniture at Tibri Mil Stn under GE Gurdaspur.

Amount

CHAIR WIRTING CUSHION M&L for removing unserviceable/ broken Rear leg of chair writing cushioned (FD-1107) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings.

M&L for removing unserviceable/ broken front leg of chair writing (FD-1107) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken side/front rail of chair writing (FD-1107) and supply and fix new side/ front rail as to match with the existing, made of shisham wood all as specified and shown on drawings.

M&L for removing unserviceable seat & back of chair writing (FD-1107) and supply and fix new seat & back consisting of 6mm plywood commercial, 40 density cool foam duly covered with Rexin Cloth not less than Rs. 300/- per mtr of best quality as directed. Seat & Back shall be upholstered complete as specified.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

CHAIR DINING M & L for removing unserviceable/ broken Rear legof chair dining (FD-1105/279) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken front leg of chair dining (FD-1105/279) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken rear/ front /side rail of chair dining (FD-1105/279) and supply and fix new rear/front/side rail as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken Stiffener of chair dining (FD-1105/279) and supply and fix new Stiffener as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken Back rest of chair dining (FD-1105/279) and supply and fix new Back rest as to match with the existing, made of shisham wood all as specified and shown on drawings.

Removing the existing cane of chair dining (FD-1105/279) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed.

M&L for removing the existing damaged PVC Sheet from chair dining (FD-/MAP-II/05) and supply and fix new PVC Sheet duly fixed to match with the existing all as specified and as directed.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

CHAIR EASY M & L for removing unserviceable/ broken Rear leg of chair easy (FD-1108/229) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken Front leg of chair easy (FD-1108/229) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken arms of chair easy (FD-1108/229) and supply and fix new arms as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken front/back/Side rail of seat & back from chair easy (FD-1108/229) and supply and fix new front/back/Side rail of seat as to match with the existing, made of shisham wood all as specified and shown on drawings.

Removing the existing cane from seat & back of the chair from chair easy (FD-1108/229) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

CHAIR WRITING M & L for removing unserviceable/ broken Rear leg of chair writing (FD-202/250/280) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken Front leg of chair writing (FD-202/250/280) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken Rear/front/Side rail of chair writing (FD-202/250/280) and supply and fix new Rear/front/Side rail as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken arms of chair writing (FD-202/250/280) and supply and fix new arms as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken Back rest of chair writing (FD-202/250/280) and supply and fix new Back rest as to match with the existing, made of shisham wood all as specified and shown on drawings.

M & L for removing unserviceable/ broken Stiffener of chair writing (FD-202/250/280) and supply and fix new Stiffener as to match with the existing, made of shisham wood all as specified and shown on drawings.

Removing the existing cane from seat & back of the chair of chair writing (FD-202/250/280) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

SOFA SET 4/5 SEATER M&L for removing the old worn/torn out cushion from sofa set 5 seater FD-281 and tapesty cloth from seat and back of sofa and providing new cushion of 40 density cool foam of size 560 x 530x100mm thick including provision tapesty cloth of approved shade & quality (cost of tapestry cloth shall not be less than Rs. 300/- per metre) all over a cover of lining cloth duly covered and stiched over the cushions complete all as directed.

M&L for preparation of wooden surfaces with sand/emery paper and applying nano anti termic, water resistance polish,non toxic high peneration polish with spray gun of approved quality all as specified and directed.

CHAIR DINNING CUSHION Removing unserviceable Rear leg from chair dinning cushioned (FD/E6/MAP/10 (R) and supply and fix new rear leg made of shisham wood as to match with the existing all as specified and shown on drawing.

Removing unserviceable Front leg of chair dinning cushioned (FD/E6/MAP/10 (R) and supply and fix new front leg made of shisham wood as to match with the existing all as specified and shown on drawing.

Removing unserviceable side/back/front rails of the seat of chair dinning cushioned (FD/E6/MAP/10 (R) and supply and fix new rails made of shisham wood as to match with the existing all as specified and shown on drawing.

Removing unserviceable Stiffener of chair dinning cushioned (FD/E6/MAP/10 (R) and supply and fix new stiffener made of shisham wood as to match with the existing all as specified and shown on drawing.

Removing the existing unserviceable latherite cloth with cushion from chair dinning cushioned (FD/E6/MAP/10 (R) and replace the same with new latherite cloth and cushion of appropriate size of 40 density cool foam all as specified and as directed.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE DINING 6/8 PERSON Removing the existing unserviceable leg of the Table dining for 06 persons and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-30/273 & 239.

Removing the existing unserviceable top rail (long/front) of Table dining for 06 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-30(M)/273 & 239.

Removing the existing unserviceable top rail (long/front) of Table dining for 08 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-30(M)/273 & 239.

Removing the existing unserviceable top rail (short/side) Table dining for 6/8 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-30 (M)/273 & 239.

Removing the existing unserviceable top of the Table dining for 06 person and supply and fix new one as to match with the existing made of 18mm thick Beige walnut pre-laminated HDHMR board both side laminated,and with 4mm thick teak wood beading duly french polish all around as specified and shown on drawing FD-30(M)/273 & 239.

Removing the existing unserviceable top of the Table dining for 08 person and supply and fix new one as to match with the existing made of 18mm thick Beige walnut pre-laminated HDHMR board both side laminated,and with 4mm thick teak wood beading duly french polish all around as specified and shown on drawing FD-30(M)/273 & 239.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TEAPOY Removing the existing unserviceable leg of the Teapoy and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-382/232 & 278.

Removing the existing unserviceable top rail (long/front) from Teapoy and supply and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing FD-382/232 & 278.

Removing the existing unserviceable top rail (short/side) from Teapoy and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-382/232 & 278.

Removing the existing unserviceable top from the Teapoy and supply and fix new one as to match with the existing made of 18mm thick beige walnut pre-laminated HDHMR board both side laminated, and with 4mm thick teak wood beading duly french polish all around as specified and shown on drawing FD-382/232&278.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE CENTRE Removing the existing unserviceable leg of the Table centre and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-274 & 235.

Removing the existing unserviceable top rail (long/front) of Table centre and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing FD-274 & 275.

Removing the existing unserviceable top rail (short/side) of the Table centre and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-274 & 235.

Removing the existing unserviceable top from the Table centre and supply and fix new one as to match with the existing made of 18mm thick beige walnut pre-laminated HDHMR board both side laminated, and with 4mm thick teak wood beading duly french polish all around as pecified and shown on drawing FD-274 & 235.

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing.

TABLE PEG Removing the existing unserviceable leg of the Table peg and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-277 & 236/384.

Removing the existing unserviceable top rail (short/side) of the Table peg and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-277 & 236/384.

Removing the existing unserviceable top rail (long/front) of Table peg and supply and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing FD-277 & 236/384.

Removing the existing unserviceable top of the Table peg and supply and fix new one as to match with the existing made of 18mm thick beige walnut pre-laminated HDHMR board both side laminated, and with 4mm thick teak wood beading duly french polish all around as specified and shown on drawing FD-277& 236/384.

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE 900X600MM WITH/WITHOUT DRAWER Removing the existing unserviceable leg of the Table 900x600mm with drawer supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD- 283 & 284

Removing the existing unserviceable top rail (long/front) of Table 900x600mm with drawer and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-283 & 284

Removing the existing unserviceable top rail (short/side) of the Table 900x600mm with drawer and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD- 283 & 284

Removing the existing unserviceable side stiffener of table 900x600mm with drawer and without drawer and supply and fix new stiffener made of shisham wood to match with the existing all as specified and shown on drawing FD- 283 &284.

Removing the existing unserviceable centre stiffener of Table 900x600mm with drawer and without drawer and supply and fix new stiffener made of shisham wood to match with the existing all as specified and shown on drawing FD- 283 &284.

Removing the existing unserviceable top of the Table 900 x 600mm with drawer and supply and fix new one as to match with the existing made of 18mm thick beige walnut pre-laminated HDHMR board both side laminated, and with 4mm thick teak wood beading duly french polish all around as specified and shown on drawing FD-283 & 284.

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing.

TABLE 1200 X 900 X760MM Removing the existing unserviceable leg of the Table 1200x900x760mm and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-273.

Removing the existing unserviceable top rail (long/front) of Table 1200x900x760mm without drawer and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-273.

Removing the existing unserviceable top rail (short/side) of the Table 1200x900x760mm and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD- 273.

Removing the existing unserviceable top of the Table 1200 x 900 x760mm and supply and fix new one as to match with the existing made of 18mm beige walnut pre-laminated HDHMR board both side laminated, and with 4mm thick teak wood beading duly french polish all aroundas specified and shown on drawing FD-273.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

SIDE BOARD. Removing the existing unserviceable door shutters (both) of side board (FD-372) and supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed. (Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality) (b) Hinges shall be 50mm of approved quality)

Removing the existing unserviceable front portion of the drawer of side board (FD-372) and supply and fix new front portion of the drawer as to match with the existing made out of 18mm thick teak face Pre-laminated particle board with laminated finish including new knob all as specified and shown on drawing.

Removing the exisiting unserviceable top from the side board (FD 372) and supply and fix new top as to match with the existing, made out of 18mm thick teak face Pre-laminated praticle board with laminated finish duly providing 4mm thick teak wood beading all round duly french polish all as specified and as shown on drawing.

Removing the existing unserviceable side made of 18mm thick teak face Pre-laminated particle board exterior grade (both) of side board (FD-372) supply and fix new 18mm thick teak face Pre-laminated particle board on sides (both) as to match with the existing all as specified and shown on drawing

Removing the existing unserviceable back of side board (FD 372) and supply and fix new back as to match with the existing, made out of 6mm thick commercial ply wood all as specified and shown on drawing

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE WRITING Removing existing unserviceable top of the table writing (FD-249&275) and supply and fix new top as to match with existing made out of 18mm thick beige walnut pre-laminated HDHMR board both side laminated, and with 4mm thick teak wood beading duly french polish all aroundas specified and shown of drawing.

Removing the existing unserviceable leg of the table writing (FD-249&275) and supply and fix new one as to match with existing made out of shisham wood complete all as specified and shown on drawing

Removing the existing unserviceable front/top rail of the table writing (FD-279&275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing

Removing the existing unserviceable back of the table writing (FD-249&275) and supply and fix the same with new one as to match with existing made out of 6mm thick plywood commercial complete all as specified and shown on drawing

Removing the existing unserviceble stiffner of the table writing (FD-249&275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified shown on drawing

Removing the existing unserviceable drawer of the table writing (FD-249&275) and supply and fix new one as to match with existing made out of 18mm thick beige walnut pre-laminated HDHMR board both side laminated finish including provision of knob compete all as specified and shown on drawing. (Note:- Knob shall be aluminium anodised (Dark Brown) of approvd size and quality).

Removing the existing unserviceable cupboard complete of the table writing (FD-249 & 275) and supply and fix new cupboard complete made out of 18mm thick beige walnut pre-laminated HDHMR board both side including 4mm teak wood beading on front side including fitting/fixtures such as knob & hinges complete all as specified and shown on drawing. (Note:- (a) Knob shall be aluminum anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality)

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

DRESSING TABLE GENTS WITH MIRROR M & L for removing the existing unseviceable looking mirror of dressing table gents with mirror (FD-230) and supply and fix new looking mirror of 5.5mm thick of appropriate size along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and shown on drawings.

M&L for removing the unserviceable drawers of the Dressing Table Gents with mirror (FD-230) and supply & fix new drawer made out of 12mm commercial plywood and front side made of 18mm thick prelaminated particle board one side laminated finish including provision of knob all as specified and shown on drawings

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

DRESSING TABLE LADIES WITH MIRROR M & L for removing the existing unseviceable looking mirror of dressing table ladies with mirror (FD-251) FD/MAP/II/07 and supply and fix new looking mirror of 5.5mm thick of appropriate size along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and shown on drawings.

M&L for removing the unserviceable drawers from Dressing Table Ladies with mirror (FD-251) FD/MAP/II/07 and supply and fix the same with new one as to match with existing made out of 18mm thick partical board one side laminated finish including provision of knob/ handle compete all as specified and shown on drawing. (Note:- Knob/ handle shall be aluminium anodised (Dark Brown) of approvd size and quality.

M&L for removing the existing unseviceable stool of Table dressing Ladies with mirror FD/MAP/II/07 and supply & fix new stool made out of 18mm thick prelaminated particles board laminated finish all as specified and shown on drawing

Removing the existing unserviceable latherite cloth with cushion from stool dressing cushioned FD/MAP/II/07 and replace the same with new latherite cloth and cushion of appropriate size of 40 density cool foam all as specified and as directed.

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing.

ALMIRAH MU WOODEN Removing the existing unserviceable door shutters (both) of side board FD-93(M).and supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed Note :- (a) Knob shall be aluminium anodized (dark brown) chromium plated of approved size and quality) (b) Hinges shall be 50mm of approved quality.

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the Almirah MU wooden all as specified and shown on drawing FD-93(M).

HAT STAND WITH MIRROR M&L for removing the existing unseviceable looking mirror from Hat Stand (FD-233) and supply and fix new looking mirror of 5.5 mm thick of appropriate size along with 4 mm thick commercial plywood back of the mirror including minor repairs and polishing to the surface with glossy finish after cleaning the surface with sand/ emery paper all as specified and shown on drawings.

M&L for removing the unserviceable pegs and supply and fix new one piece of superrior quality complete all as specified

BIN SOILED LINEN MULTIOURPOSE Removing the existing unserviceable door shutters (both) of (FD-1104) (FD/ E6/MAO/09) and supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed. (Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality) (b) Hinges shall be 50mm of approved quality.

Removing the exisiting unserviceable top of the Bin Soiled linen Multiourpose (FD 1004) FD/E6/MAO/09 and supply and fix new top as to match with the existing, made out of 18mm thick teak face Pre-laminated praticle board with laminated finish duly providing 4mm thick teak wood beading all round duly french polish all as specified and as shown on drawing.

Removing the existing unserviceable plywood of sides (both) of Bin Soiled linen Multiourpose(FD-1104) supply and fix new 3.5mm thick one side teak face plywood on sides (both) as to match with the existing all as specified and shown on drawing

Removing the existing unserviceable back of Bin Soiled linen Multiourpose (FD 1004) FD/E6/MAO/09 and supply and fix new back as to match with the existing , made out of 6mm thick commercial ply wood all as specified and shown on drawing

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE LAUNDRY Removing existing unserviceable top of the table laundry (FD-85 M) and supply and fix new top as to match with existing made out of 18mm thick beige walnut pre-laminated HDHMR board both side laminated, and with 4mm thick teak wood beading duly french polish all aroundas specified and shown of drawing

Removing the existing unserviceable leg of the table laundry (FD-85 M) and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing.

Removing the existing unserviceable top rail (long/front) of table laundry (FD-85 M) and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE 2400 X 1200 X 760MM Removing existing unserviceable top of the Table 2400x 1200x 760 mm and supply and fix new top as to match with existing made out of 18mm thick beige walnut pre-laminated HDHMR board both side laminated, and with 4mm thick teak wood beading duly french polish all aroundas specified and directed

Removing the existing unserviceable leg of the Table 2400mm x1200 mm and supply and fix new leg made of shisham wood to match with the existing all as specified and directed

Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality all as specified and directed

CHARPOY GI PIPE WITH NEWAR M&L for removing unserviceable nylon newar from charpoy GI pipe (FD-220) and supply and fix new 12 mm BWR phenol bonded commercial plywood of size 2000 mm x 900 mm including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails. Supply and fix 10 nos of nut and bolts of best quality including washer for fixing of plywood and match with the existing all as specified and shown on drawing.

M&L for removing of old/unserviceable GI check nut of 32mm dia and supply and fixing of GI check nut of 32mm ISI marked in position and also tightening of all component (Complete Charpoy). Complete all as specified and directed by Engr-in-Charge wherever required

M&L for removal of old/unserviceable GI Elbow of 32mm dia bore 3 way and supply and fixing of GI Elbow of 32mm bore 3 way ISI marked (Weight of Elbow not less than 450 gms) in position and also tightening of all component (Complete Charpoy) complete all as specified and directed by Eng-in-Charge wherever required.

M&L for fixing MS flat of charpoy GI pipe of size 40x4mm with one coat of red oxide paint and two coats of black synthetic enamel paint as directed.

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 23,932/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

om parkash and sons (BID ID -3302867)

BALWINDER SINGH AND SONS (BID ID -3303133)