Erode Zone Tiruppur District Madathukulam Town panchayat

Amount

Geophysical Survey Charges

Supply and erection of 200mm dia PVC causing pipe ete., complete

Drilling 150 mm Deep Borewell with including cost and conveyance materials all labour charges etc., complete

Upto 150 m beloe Ground level

From 151 m upto 180 m

From 181 m upto 210 m

From 211 m upto 240 m

Earth work excavating and depositing on bank with initial lead of 10 metre and initial lift of 2 metre in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard specification

Supply and Delivery of 7.50 HP Three Phase Submersible mortar including cost and conveyace of all labour charges etc., complete

1) 7.50 HP Submersible Motor with Panel Board (50 LPM,250 m Head)(81815+19580)

2) 50 mm UPVC pipes

3) 4 Sq.mm. Core cable

4) 40mm GI pipes

Supply of PVC PIPE 6 Kg/cm2 including all cost and conveyance.

63mm dia PVC Pipe

Conveying of PVC right pipe to trench with in a lead of 200m lowering in to a trench carefully laying to proper grad and alignment jointing with PVC couplers with cement paste and testing to the requited pressure including conveyance of water upto 1.00km

63mm dia PVC Pipe

Lowering GI pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD officers

50mm GI pipes

Refilling with excavated earth other than sand complying with standard specification.

Labour charges for the erection of Submercible pumpset in Borewell or open well inculding Fixing and jointing submersible cable withproper clamps upto the starter to reqired depth and al so fixing of riser pipes to the required depth valves, erection clamps, pressure gagues upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps, capacitor single phasing preventor, waqter level guard and laying and jonting the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. (up to 5 HP Motor)

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

RAJU MURUGESAN