Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.6 LAccepted-Finance 866 1ST CROSS BINNYPET MAIN ROAD NEW BINNY LAYOUT BINNYPET BANGALORE 560 023 | BENGALURU URBAN | KARNATAKA | 560023 | L1 | Accepted-Finance Being L1 | |
| 2 | L2₹71.9 L+₹11.2 L (18.6%)Rejected-Finance 10 RAMTEKDI ROAD PUNE 411 013 | PUNE | PUNE | MAHARASHTRA | 411013 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹82.8 L+₹22.1 L (36.5%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹88.0 L+₹27.4 L (45.2%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹93.5 L+₹32.9 L (54.3%)Rejected-Finance RAHEJA NIWAS 243 GHORPADE PETH PUNE 411 042 | PUNE | PUNE | MAHARASHTRA | 411042 | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | ASHOKA FURNITURES L7 | MISHON TRADING CORPORATION L6 | Mahesh Traders L5 | KASTURILAL HARICHAND OHRI AND SONS L2 | GAJANAN SALES CORPORATION L8 | N N J ENTERPRISES L1 | Priyanka Industries L3 | LUCKY ENGINEERS AND CONTRACTORS L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for new table top in one piece made out of 18/19mm thick prelaminated particle board confirming to IS of Make (As per particular specification) including using teak wood edging 6 mm thick duly French polished after preparation of surface shall be provided all around the top including removing unsv top of table office clerk steel FD 381/ FD 1004/ FD 84(M) all as directed . | 300 | Each | 600 ₹1,80,000 | 450 ₹1,35,000 | 750 ₹2,25,000 | 450 ₹1,35,000 | 640 ₹1,92,000 | 480 ₹1,44,000 | 570 ₹1,71,000 | 300 ₹90,000 Lowest |
| 1.01 | All as per Item No. 1.00 above but for new lock with duplicate key for table including removing of old lock (As per sample and as directed by Engr-in-Charge) all as shown on drawing. | 30 | Each | 100 ₹3,000 | 50 ₹1,500 | 150 ₹4,500 | 70 ₹2,100 | 140 ₹4,200 | 40 ₹1,200 Lowest | 120 ₹3,600 | 100 ₹3,000 |
| 1.02 | All as per Item No.1.00 above but for new rubber shoes of superior quality as per sample approved, including removing of old rubber shoes. | 120 | Each | 60 ₹7,200 | 5 ₹600 | 7 ₹840 | 2 ₹240 Lowest | 10 ₹1,200 | 3 ₹360 | 3 ₹360 | 10 ₹1,200 |
| 1.03 | All as per Item No.1.00 above but for new PVC recessed handle of trade pattern, superior quality as per sample approved, including removing the old PVC recessed handle from drawer. | 90 | Each | 100 ₹9,000 | 40 ₹3,600 | 50 ₹4,500 | 20 ₹1,800 | 280 ₹25,200 | 8 ₹720 Lowest | 20 ₹1,800 | 10 ₹900 |
| 1.04 | M&L for preparation of surface of table and applying one coat synthetic enamel paint 1st grade of colour olive green/ smoke grey as approved by GE by using mechanical spray (maximum working pressure of 3300 PSI) for table office clerk steel FD 381/ FD 1004/ FD 84(M) internally and externally complete including applying putty where required all as specified and directed by Engr-In-Charge. | 300 | Each | 250 ₹75,000 | 200 ₹60,000 | 150 ₹45,000 | 280 ₹84,000 | 190 ₹57,000 | 130 ₹39,000 Lowest | 165 ₹49,500 | 150 ₹45,000 |
| 2.00 | M&L for new table top in one piece made out of 18/19mm thick prelaminated particle board confirming to IS of Make (As per particular specification) including using teak wood edging 6 mm thick duly French polished after preparation of surface shall be provided all around the top including removing unsv top of table office clerk steel MEC 381 all as directed . | 60 | Each | 600 ₹36,000 | 550 ₹33,000 | 750 ₹45,000 | 450 ₹27,000 | 730 ₹43,800 | 480 ₹28,800 | 570 ₹34,200 | 300 ₹18,000 Lowest |
| 2.01 | All as per Item No. 2.00 above but for new lock with duplicate key for table including removing of old lock (As per sample and as directed by Engr-in-Charge) all as shown on drawing. | 50 | Each | 100 ₹5,000 | 50 ₹2,500 | 150 ₹7,500 | 70 ₹3,500 | 140 ₹7,000 | 40 ₹2,000 Lowest | 120 ₹6,000 | 100 ₹5,000 |
| 2.02 | All as per Item No.2.00 above but for new rubber shoes of superior quality as per sample approved, including removing of old rubber shoes. | 168 | Each | 40 ₹6,720 | 5 ₹840 | 7 ₹1,176 | 2 ₹336 Lowest | 10 ₹1,680 | 3 ₹504 | 3 ₹504 | 10 ₹1,680 |
| 2.03 | All as per Item No.2.00 above but for new PVC recessed handle of trade pattern, superior quality as per sample approved, including removing the old PVC recessed handle from drawer. | 84 | Each | 100 ₹8,400 | 40 ₹3,360 | 50 ₹4,200 | 20 ₹1,680 | 280 ₹23,520 | 8 ₹672 Lowest | 20 ₹1,680 | 20 ₹1,680 |
| 2.04 | M&L for preparation of surface of table and applying one coat synthetic enamel paint 1st grade of colour olive green/ smoke grey as approved by GE by using mechanical spray (maximum working pressure of 3300 PSI) for table office clerk steel MEC 381 internally and externally complete including applying putty where required all as specified and directed by Engr-In-Charge. | 60 | Each | 400 ₹24,000 | 150 ₹9,000 | 200 ₹12,000 | 270 ₹16,200 | 190 ₹11,400 | 120 ₹7,200 Lowest | 165 ₹9,900 | 200 ₹12,000 |
Tender Value
₹90 L
EMD Value
₹1.6 L
Closing Date
16 Sept 2026, 6:00 pmClosed
GE (SB) KARWAR
GARRISON ENGINEER (SEABIRD) KARWAR Naval Base, Sankrubagh (PO) Karwar - 581308
REPAIR AND POLISHING TO VARIOUS TYPES OF WOODEN FURNITURES, STEEL FURNITURES HELD AT SITE A, SITE E AND AMDALLI LOCATIONS OF NAVAL BASE AREA KARWAR
2026_MES_784885_1
8545/E8
Open Tender
Miscellaneous Works
Item Rate
240 days
GE (SB) KARWAR
AS PER NIT
8 documents required · 8 mandatory
₹1,000
GE (SB) KARWAR
₹1.6 L
Yes
22 Sept 2026
18 Aug 2026
18 Sept 2026
18 Aug 2026
16 Sept 2026
9 Sept 2026
18 Aug 2026 - 25 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for new table top in one piece made out of 18/19mm thick prelaminated particle board confirming to IS of Make (As per particular specification) including using teak wood edging 6 mm thick duly French polished after preparation of surface shall be provided all around the top including removing unsv top of table office clerk steel FD 381/ FD 1004/ FD 84(M) all as directed . | - | Each | 1.25 | - |
| 1.01 | All as per Item No. 1.00 above but for new lock with duplicate key for table including removing of old lock (As per sample and as directed by Engr-in-Charge) all as shown on drawing. | - | Each | - | - |
| 1.02 | All as per Item No.1.00 above but for new rubber shoes of superior quality as per sample approved, including removing of old rubber shoes. | - | Each | 1 | - |
| 1.03 | All as per Item No.1.00 above but for new PVC recessed handle of trade pattern, superior quality as per sample approved, including removing the old PVC recessed handle from drawer. | - | Each | 2 | - |
| 1.04 | M&L for preparation of surface of table and applying one coat synthetic enamel paint 1st grade of colour olive green/ smoke grey as approved by GE by using mechanical spray (maximum working pressure of 3300 PSI) for table office clerk steel FD 381/ FD 1004/ FD 84(M) internally and externally complete including applying putty where required all as specified and directed by Engr-In-Charge. | - | Each | 3 | - |
| 2 | M&L for new table top in one piece made out of 18/19mm thick prelaminated particle board confirming to IS of Make (As per particular specification) including using teak wood edging 6 mm thick duly French polished after preparation of surface shall be provided all around the top including removing unsv top of table office clerk steel MEC 381 all as directed . | - | Each | 4 | - |
| 2.01 | All as per Item No. 2.00 above but for new lock with duplicate key for table including removing of old lock (As per sample and as directed by Engr-in-Charge) all as shown on drawing. | - | Each | 5 | - |
| 2.02 | All as per Item No.2.00 above but for new rubber shoes of superior quality as per sample approved, including removing of old rubber shoes. | - | Each | 6 | - |
| 2.03 | All as per Item No.2.00 above but for new PVC recessed handle of trade pattern, superior quality as per sample approved, including removing the old PVC recessed handle from drawer. | - | Each | 7 | - |
| 2.04 | M&L for preparation of surface of table and applying one coat synthetic enamel paint 1st grade of colour olive green/ smoke grey as approved by GE by using mechanical spray (maximum working pressure of 3300 PSI) for table office clerk steel MEC 381 internally and externally complete including applying putty where required all as specified and directed by Engr-In-Charge. | - | Each | 8 | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
Tender8545.pdf
Tender Documents • 1.07 MB
BOQ_879498.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .