Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.4 LAccepted-AOC FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹51.7 L+₹6.7 L (14.9%)Rejected-Finance | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹52.6 L+₹7.6 L (17.0%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹57.5 L+₹12.5 L (27.8%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹68.0 L+₹23.0 L (51.2%)Rejected-Finance GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹85 L
EMD Value
₹1.7 L
Closing Date
6 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8924 STRUCTURAL REPAIR TO VARIOUS CAISSONS AT SBW JETTY AT ND MBI UNDER GE NW KUNJALI
2023_MES_588663_1
8924/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KUNJALI
Please refer tender document
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹1.7 L
Yes
9 Aug 2023
8 Apr 2023
8 May 2023
15 Apr 2023
6 May 2023
22 Apr 2023
8 Apr 2023 - 15 Apr 2023
Amount
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square cm in field using minimum 500 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc all as specified and directed.
M&L PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed.
Supply only recron fibre for RMC 0.25kg /Cum. Complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for.
Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs and set incement mortar 1:4, complete all as specified. (Reinforcement shall be measured and paid separately all directed by EIC)
M&L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) cement concrete as a leveling course on roof surfaces and coping complete all as specified and as directed.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 40mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surface all as specified and directed.Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately)
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface all as specified and directed. Make :- Dr. Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)
Supply only ready mix microconcrete mixture. Make : Dr.Fixit/Sunanda/chemestik/Fosrok
S&F welded steel wire fabric, cut to length, fixed to steel members/reinforcement steel, weight per Sqm nexc. 4 Kg.
Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel. Complete all as specified and directed.
Providing and fixing additional main steel bar or stirrups of designed diameter in various structural elements like column, beams and foundations including drilling, bending and fixing the bars with epoxy putty etc. Complete all as specified and directed. (Steel provided on the basis of 1% of volume of concrete)
Dismantling wrought or mild steel work of any description.
M&L for Stainless steel decoravtive railings (grade 316), staircase3 (design and pattern as approved made out of SS pipes, SS flats, SS plates etc. Complete with and including necessary welding , buffing/polishing and fixing complete all as specified and directed.
M&L for Stainless steel decorative railings chain alloy(grade 316), having 8 mm minimum thickness (design and pattern as approved ) as used to connect two stainless steel post with hooks etc. Complete with and including necessary welding , buffing /polishing and fixing complete all as specified and directed.
M&L for epoxy base joint filler paint on external surfaces of walls/floor to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed Make : Pidilite / Fosroc / Chemistic or equivalent
M&L for drilling and fixing Rohibb teflon nozzles in RCC members, including drilling holes of 12 mm dia, 50 to 100mm deepholes. Works shall be carried out as under : - (i) Cleaning holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12 mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be manchine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min 12 hr. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dray for 2 to 3 days. Also seal the crack between the ports with epoxy putty. (v) In case crack is wider 2mm upto 4 mm to 5 mm wide drill holes at the sides of crack in a staggered manner , at intervals of 6 inches and affix them epoxy as mentioned above. (vi) Also, seal the face of the crack with a liberal application of the epoxy putty and including scaffolding upto any height.
M&L for injecting of site mixed cement slurrry grout, mixed in specifified proportion containining cement ,sand, water with addition of plasticizers 9approved make) & migratory corrosion inhibitor, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating slurry mixed to a lump free fresh creamy consistancy, mixing shall be done by mixer continuouly stirring mechanically to keep cement particles in suspension. Injection of approved/specifified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating and including scaffolding upto any height complete filliing of grout in the holes drilled . Make/brand of epoxy grout- Dr Fixit Epoxy injection of Eppco KP-HP-250 of m/s Krishna conchem or shaligrout EIi of STP Ltd.
M&L for injecting Low visosity (3-5cps) high molicular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including, mixing or material as mixing of material components (Part a&b) in the required quantities as per manufacturer's instruction by weight batching. Grouting fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/protectsil CIT or Ferogard 903. Maintain desired pressure in the gun by air compressor ; maintain the pressure at exit (2 to 3kg/Cm2) by monitoring pressure guage at exit grout the material throught prefixed nozzles in the structural elements @ 100ml per nozzle. Repeat the precess for all the nozzles and including scaffolding upto any height complete all as specified and as directed.
Taking down cement plaster on brick surfaces built in cement mortar including raking out joints, hacking for key scrubbing down with water etc complete.
Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed (Water proofing compound to be measured and paid for separately).
Material & labour for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Fosroc/Krishna conchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent around edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and directed by Engineer-in-Charge.
Supply only Integral waterproofing compound . All as specified and directed.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface complete and removing all sea vegetation complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coats of anti carbonation paint DEKGUARD S of FOSROC or equivalent over a coat of primer DEKGUARD of FOSROC or equivalent over vertical concrete surface in jetty/dry dock above sea level all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete.
Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectanguar or polygonal.
M & L for errection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls all as specified & directed.
Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment.
Supply and fix structural steel framed works such as angle, channel, grating, gate, ladder etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) all as specified and directed.
M&L for preparation of newly plastered surfaces of wall, applying two coats of Oil emulsion distemper over a coat wall care putty of 3mm thick and alkali resistant primer all as specifed and directed.
M&L for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil emulsion distemper over a coat of primer all as specifed and directed.
M&L for preparation of new plastered surface of any description over 10 cm width or girth, applying two coat of synthetic enamel paint over a coat of primer all as specified and directed.
M&L for preparation of Old plastered surfaces in ceiling, applying three coats of white wash all as specified and directed.
M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth applying two coats of 100% acrylic, weather resistant emulsion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction
Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work. Note :- Wooden scantling will not be taken on Schedule of credit. It will be handed over to MCM department of Naval Dockyard Mumbai as per order by competent authority.
S & F 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental supplied and fixed (size of wooden planks 3000 mm x 300 mm x150 mm ).
S & F 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental supplied and fixed (size of wooden planks 2000 mm x 300 mm x150 mm)
S & F 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental supplied and fixed (size of wooden planks 1000 mm x 300 mm x 150 mm) all as specified and directed.
Supply and fix anchor bolt fastners of size 500mm long and 30mm dia including drilling holes in timber, concreting and grouting as required and directed by Engineer in charge. Note: In case of non availability of required length and dia of fastner bolt, next higher size as available in market will be used for work without any extra price adjustment.
M&L for preparation of new decorated wooden surfaces of any description over 10 cm width or girth, applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed.
M&L for preparation of old surfaces of any description over 10 cm width or girth, applying a coat of synthetic enamel paint of approved colour all as specified and directed.
M&L for complete removal of existing plastered wall surface, over 10cm girth preparation of surfaces, applying two coats of 100% acrylic, weather resistant emulsion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.
M&L for epoxy base joint filler paint on external surfaces of walls/floor to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed Make : Pidilite / Fosroc / Chemistic or equivalent
M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of epoxy paints over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying two coats of epoxy paints over a coat of red oxide primer complete all as specified and directed.
Removal of excavated material and demolised concrete to a distance exc. 25 Km & depositing where directed. Each load not less than 6 Cum.
M&L for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint or equivalant as approved by GE). All as specified and directed.
Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness all as specified and directed.
M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.
M&L for in repairs Plain, black, mild steel sheeting, 1.50 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)
M&l for brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.
M & L for cement concrete type B0, 1:2:4 (Using 20 mm graded stone aggregate) in roof, floor with water proofing compound by weight of 3 % of total cement content complete all as specified and directed by Engr-in-charge (WPC shall be measured and paid seperately).
Material & labour for rendering minimum 20mm thick cement plaster in CM (1:3) on roof top surface finished even and smooth including WPC by weight of 3% of total cement content, priming @ 0.8 kg/Sqm of finished concrete surface complete and evenly applying a coat of cold bituminous at 1 Kg/Sqm and applying seating cloth over clod bituminou, finally paving bitumen of any penetration at 1.5 kg/Sqm complete all as specified and directed. Note :- WPC will be measured and paid seperately.
M & L cement concrete type B0, 1:2:4 (Using 12.5 mm graded stone aggregate) in floor kerbs of mud stops, rounded or chamfered on edges.
Supply only Integral waterproofing compound in liquid form . All as specified and directed. (Make: Dr Fixit or equivalent)
jalandhara construction
Shree Ayyappa Engineering
MADHU ENTERPRIZES
M/s S.D Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .