Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹4.6 L+₹21,514 (4.95%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹4.7 L+₹33,089 (7.61%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹30 L
EMD Value
₹30,000
Closing Date
17 Feb 2024, 3:00 pmClosed
CO
Bhusawal Muncipal Council
Desilting and cleaning of well for Bhusawal Municipal Council for the year 2024-2025
2024_DMA_1001184_1
BMC/WS/2024-25/166/08
Open Tender
Civil Works - Water Works
Item Rate
365 days
Bhusawal Muncipal Council
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,000
₹30,000
5 Apr 2024
9 Feb 2024
20 Feb 2024
9 Feb 2024
17 Feb 2024
9 Feb 2024
Amount
Excavation for roadway in earth,soil of all sorts, sand, gravel or soft murum including dressing section to the required grade,camberand sides lopesand conveying the excavated material swithal llifts up to a lead of 50m. and spreading for embankment or stacking as directed.
Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precastinter locking cement concrete paving blocks 80MM thickin M40 grade of approved size and shape for City streets, small/medium market roads,low volume roads, utility cut sonarterial roads etc.
Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261)
Conveying materials obtained from road cutting including all ifts,laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed.
Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork,laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Providing and laying in situ /Ready Mix cement concrete M-20 of trap/granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip founda tions, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
Providing and applying washable powder distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat) etc .complete.
Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters
Supply of all types of Structural steel conforming to Fe 410 B of IS 2062, Fabrication, assembling, erection / slewing/ end launching of Steel girders ( NOT requiring traffic block) upto 45.7 m span on sub structure incl.provision of trolley refuges, incl. loading, unloading, lift and taxes complete, assembly of girders on drift/bolts, field riveting/ welding, assembling of temporary support for side slewing, raising of girders to the bed block level, providing sliding arrangements (Material at site, fabrication at site, erection / launching etc only) PLATE GIRDER / Semi Through Girder
Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.
Supplying, installing, testing and commissioning of solar water pump of 2 HP capacity, DC surface type, 180000 LPD total head 10m, comprising of 1800 Wp PV array / submersible type (with controller) 63000 LPD, total head of 30m, comprising of 1800 Wp PV array respectively mounted on GI structure with necessary hardware with 5 years on site performance warrantee. Specification no. ESD-SWPS(PWD SSR Elec/mech 2021-22) page No86
Sumbersible monoblock Pump Set deccan/texmo (with bronze /stainless steel (CF8M) Imppler ) Horizontal Vertical up to 3 stage l(MJP SSR Elec/mech 2021-22) page No 3
1.5 HP with Eraction
3.0 HP with Eraction
5.0 HP with Eraction
Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser.l(MJP SSR Elec/mech 2021-22) page No 27
Up to 7.5 HP with erection
Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.l(PWD SSR Elec/mech 2021-22) page No129
3 core 4 sq mm
Supplying and erecting "B" class G.I. Bend in position with necessary materiall(MJP SSR Elec/mech 2021-22) page No 11
50mm with erection
Supplying and erecting "B" class G.I. Coupling / Nipple in position with necessary material(MJP SSR Elec/mech 2021-22) page No 11
50mm with erection
Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread /insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete 6kg/sq.cml(MJP 2021-22) page No 113
Quality Control Charges
Add Royalty Charges as per R & F Dept. For All Other Minerals = Royalty + surcharge (2%) = 211.95+4.23 = 216.18 per cum
Add Royalty Charges as per R & F Dept. For sand = Royalty + surcharge (2%) + Distt. Mineral Foundation Cess (10%) = 211.95+4.23+21.19 = 237.37 Per Cum
RAHUL AMARLAL MAKHIJA
Shaikh Sajid Shaikh Salim
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .