SE/MRC/TB/NIT/01/2023-24/17 (Gr-III)

Amount

Construction road from Mikirbheta -Borbhogia Road to Mikirbheta-Hekudangbori road via Mikirbheta-Dekagaon -Nathgaon

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm dia, removal of stumps of trees cut earlier and disposal of serviceable materials to be used or auctioned, upto 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specifications Clause 201. (I) By Manual Means (A) In area of Non- thorny jungles

Excavation for roaday in soil by mechanical means including cutting and pushing theearth to site of embankment up to a distance of 100m, including trimming bottom and side slopes in accordance with requirments of lines, grades and cross-sections. Excavation in Ordinary Soil

Scarifying Existing Bituminous surface to a depth of 150mm by Mechanical Means scarifying the existing bituminous road surface to a depth of 150mm and desposal of scarified material with a lift upto 3.0m and lead upto 1000m as per Technical Specification Clause 301.4

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) with lead upto 1000m as per Technical Specification Clause 303.1. (i) From private land

Providing, Laying, Spreading and compacting stone aggrigates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarses aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (A) By Manual Means.

Providing, Laying, Spreading and compacting stone aggrigates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarses aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405. (A) By Manual Means.

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 including carriage. a) Including Edge block/ Edge restraints

Providing and fixing of retro-refectorised cautionary, mandatory and informatory signas per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting , 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the fround by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per drawing and technical Specification Clause 801. 600mm circular

600mm equilaterial tringle

Providing refective pavement marker with Micro prismatic lens in both direction having thrmoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using adhesives and the procedures recommanded by the manufacturers with three months replancement warranty and free maintenance.

Providing and erecting direction and place identification of semi reflective signboards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSRT&H specification

RUPAM BHUYAN (BID ID -244530)