Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹44.0 L
EMD Value
₹44,100
Closing Date
1 Aug 2024, 3:00 pmClosed
BLOCK DEVELOPMENT OFFICER(V.Pt)
VIRALIMALAI
Construction of 100000 Ltr Capacity OHT at Viralimalai in Viralimalai Panchayat
2024_RDTN_465581_1
RIDF_2024_2025_VIRALIMALAI
Open Tender
Civil Works
Item Rate
180 days
Viralimalai
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹44,100
2 Aug 2024
24 Jul 2024
1 Aug 2024
24 Jul 2024
1 Aug 2024
24 Jul 2024
Amount
Construction of 100000 Ltr Capacity OHT at Viralimalai in Viralimalai Panchayat.
Construction of 100000 Ltr Capacity OHT
Earth work excavation and depositing on bank with initial lead 10m and lift of 2.0m in the following classification of all soils, bailing out water wherever necessary including providing danger lights etc., and as directed as per specification SS 20B
a) for outer peripheral column foundation
a) for outer peripheral column foundation
Filling with good river sand including cost and conveyance of all materials to site and all labour charges etc complete
Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance to work site and all labour charges for mixing,laying and curing etc complete
Reinforced cement concrete M30 design mix using 10mm and 20mm Hard Broken Stone. The rates excluding the cost of supplying, fabricating and placing in opposition of MS / RTS Grills for reinforcement and centering, strutting & shuttering,
(i) below 1.50m to 4.50m depth from G.L
Below G.L upto 1.50m depth
Above G.L upto 4.50m height
Above 4.50m to 7.32m ht., from G.L
Above 7.32m to 10.98m ht., from G.L
Reinforced cement concrete M30 design mix using 10mm and 20mm Hard Broken Stone. The rates excluding the cost of supplying, fabricating and placing in opposition of MS / RTS Grills for reinforcement and centering, strutting & shuttering,
Above 10.98m to 14.64m ht., from G.L
Above 14.64m to 18.30m ht., from G.L
Above 18.30m to 21.96m ht., from G.L
Centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3m ht., using MS sheet of size 90cm x 60cm and BG. 10 gauge stiffened with welded MS angles of size 25mm x 2mm x 3mm laid over silver oak (country wood)
Upto 3.30m ht., from G.L
From 3.30m to 4.30m ht.
From7.30m ht., to 8.30m ht.
From11.30m ht., to 12.30m ht.
From 15.30m to 16.30m ht.
Centering for square column - upto 3.30m ht.
From 3.30m to 4.30m ht.,
From 5.30m to 6.30m ht.,
From 5.30m to 6.30m ht.,
From 6.30m to 7.30m ht.,
From 7.30m to 8.30m ht.,
From 8.30m ht., to 9.30m ht.,
From 9.30m ht., to 10.30m ht.,
From 10.30m ht., to 11.30m ht.,
From 11.30m ht., to 12.30m ht.,
From 12.30m ht., to 13.30m ht.,
From 13.30m ht., to 14.30m ht.,
From 14.30m ht., to 15.30m ht.,
Centering for curved surface
From 14.30m to 15.30m ht., from G.L
From 15.30m to 16.30m ht., from G.L
Upto 0-3.30 m,
Centering for circular column
upto 3.30m ht., from floor level
From 3.30m to 4.30m ht.,
From 4.3m to 5.3m ht.,
From 5.3m to 6.3m ht.,
From 6.3m to 7.3m ht.,
From 7.3m to 8.3m ht.,
From 8.3m to 9.3m ht.,
From 9.3m to 10.3m ht.,
From 10.3m to 11.30m ht.,
From 11.3m to 12.30m ht.,
From 12.3m to 13.30m ht.,
From 13.3m to 14.30m ht.,
From 14.3m to 15.30m ht.,
Supplying, fabricating and placing in position of RTS grills for reinforcement for various members including cost of steel for all RCC works etc., complete as per standard specifications and as directed by Engineer-in-charge. The rate to include the cost
Painting two coats with approved cement paint best quality over the outer wall surface including cost of cement paint etc. complete complying with standard specification etc., complete as per standard specifications and as directed by Engineer-in-charge
Providing Cut stone set in CM 1:3 (one cement and three sand) using well dressed cut stone supporting inlet pipe of size 0.30 x 0.30 x 0.15m for service reservoir etc., complete as per standard specifications and as directed by Engineer-in-charge
|Supplying and fixing in position of RCC |(1:1.5:3) in side access lader of |following size using 20mm size HBS jelly centring, shuttering,strutting, fabrication and placing in position of complete and as directed by TWAD Board
Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers.
Supplying and fixing of RCC 1:1.5:3 (1 Cement : 1.5 Sand : 3 Coarse Aggregate) using 20 mm HBGS for RCC Handrails of 0.91 m height over the top of roof slab of approved pattern and design including the cost of reinforcement, centering, precasting, finishi
Supplying and fixing in position of 0.60 x 0.60m water tight CI manhole frame and cove of approved pattern at the roof slab and as directed. The manhole frame and cover should be of light duty and confirming to IS: 1726-1974
Supplying and fixing of RCC 1:1.5:3 (1 Cement : 1.5 Sand : 3 Coarse Aggregate) using 20 mm HBGS for RCC Handrails of 0.91 m height over the top of roof slab of approved pattern and design including the cost of reinforcement, centering, precasting, finishi
Provision for pipe connection arrangements for inlet outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete as detailed below.
65mm Ø GI pipes for inlet 1xl connection
65mm Ø GI pipes for over flow
50mm Ø GI pipes for scour pipe 1xl
65mm Ø GI pipe for delivery 1x1 pipe
90 mm x 80 mm Ø PVC Threaded coupler
75 mm x 50 mm Ø PVC threaded coupler
65mm Ø GI Tee
65mm Ø GI 90 Bend
65mm Ø GI coupler
65mm Ø GI union
65mm Ø GI Elbow
65x50mm Ø GI Reducer - Medium
75mmx 63mm PVC Reducer
75 mm x 50 mm Ø PVC threaded coupler
75x90 PVC Reducer
75mmx 63mm PVC Reducer
65mm Ø GM Gate valve
50mm Ø GM gate valve
Pipe Line
Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes etc
Supply and delivery of following PVC Pipes
Conveyance of the following rigd PVC pipes, lowering to trenches and laying to proper grade and alignment etc Complete as per TWAD Schedule of rate 11d ii
Refilling with excavated earth including all labour charges etc complete
GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)
R. BALAKRISHNAN (BID ID -1098594)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .