Renovation and upgradation of guest house of 12th floor at Zerlina building at Malabar hills under LGR maintenance unit, Mumbai.

Amount

ABSTRACT SHEET

PART A: CIVIL WORKS

PART-B: PH WORKS

PART-C :FURNITURE (UPGRADATION) WORKS

MISCELLANEOUS ELECTRICAL AND AC WORKS

Description of Work / Item(s)

Amount

PART A: CIVIL WORKS

Dismantling / demolishing work by manual /Chiselling/ mechnical means, carefully without damaging & disturbing adjacent structures, at all levels, locations & floors including labour, machine, loading, unloading, transportation, stacking of serviceable material at directed place & disposal of debris & unserviceable material as per direction, scaffolding etc complete all as per specifications and as directed by Engineer-in-Charge.

Brick masonry work in cement mortar including cement mortar plastering / pointing work

Stone masonry work in cement mortar including cement mortar plastering / pointing work

Plain Cement Concrete (PCC), Floor tiles etc

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground outside colony / campus etc complete all as per specifications and as directed by the Engineer-in Charge.

Providing & laying at all floors & locations Homogeneous Full body Vitrified tile/ Glazed vitrified tile/ Anti Skid Vitrified tile Vitrified tile double charge/ multi charge (Glossy/Matt/Satin)/Dolce vita of Ispira or equivalant approved manufacturers of sizes 600mm X 600mm / 800mm X 800mm / 1000mm X 1000mm/1200 X 2400mm size or as per approved size and having mimimum thickness 8.5 mm or as specified by approved manufacturer tiles conforming to IS:15622 having water absorption less than or equal to 0.08% (Group B I a), in flooring/skirting/ dado/ cladding/staircase tread/ riser at all floors and location, heights/ levels and lead in approved pattern and colour, shade laid over cement mortar bedding/ backing/ adhesive backing, including cleaning and preparing the surface for bedding/backing, spreading the neat cement slurry, close jointed and grouted with matching coloured readymade cement grout and approved pigment as per manufacturer's specifications, finished to level, line, slope and plumb, cutting of tiles, wastage, making openings/ cut out if neccesary, final cleaning of surfaces,curing etc. all as per drawings, specifications & as directed by Engineer in charge. Note:- The tiles must be cut with the zero chipping water jet/diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.

In flooring of bedroom using Homogeneous Full body vitrified tile of size 1200 mm X 2400 mm laid over 20 mm thick cement mortar1:4 bedding (using ready mix mortar) and spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading cement paste using minimum cement of about 4.50 kg/sqm over bedding,

In flooring of bathroom using Homogeneous Full body vitrified anti skid tile of size 600mm x 600mm laid over 20 mm thick cement mortar1:4 bedding (using ready mix mortar) and spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading cement paste using minimum cement of about 4.50 kg/sqm over bedding, .

In dado of bathroom using Homogeneous Full body vitrified tiles measuring 1200mm x 600mm for bathroom walls. Installation includes applying a strong adhesive, ensuring even grout lines, and achieving a clean and level surface.

Supply and installation of following size brass “T” section / squre bar of golden shade lacquer finished or approved size and patterned used for vertical and horizontal tile joints of toilet. The Patti should be made from high-quality brass or a similar durable material with a golden shade lacquer finish. Including installation cutting in proper line & level and jointing with jointing material and ensuring the Patti is flush and polished on exposed surface for a neat & fine finished edge as per drawings and specification as directed by Engineer-in-Charge

Brass ‘T’ section of size 15 mm X 9 mm & 2 mm thick lacquer finished with golden shade used between joint of tiles vertically / horizontally at toilet flooring / dado etc.

Brass bar of size 8 mm X 8 mm or approved by Head Architect lacquer finished with golden shade

Supply and installation of high-quality composite marble of specta Quartz surfaces of Gold rush colour/Cat. No. PL-191 for window sills and jambs. The marble should be polished and precisely cut to fit the designated areas. Installation involves setting the marble using a high-bond adhesive, ensuring perfect alignment, and finishing with matching caulk to create a seamless look as per drawings and as directed by Engineer-in-Charge

Supply and installation of high-quality Plaster of Paris (POP)/PVC moulding / cornice for decorative purposes. The moulding should feature intricate designs and be expertly installed on walls and ceilings. This includes preparation of the surface, precise installation of the moulding, and painting to match the interior décor etc. all as per drawings and as directed by Engineer-in-Charge

Repainting of old painted surfaces with two coats of Royal Aspira Luxary emulsion paint of Asian paint or equivalent of approved shade and make over two coats of approved cement primer which consist of thoroughly scrapping old painted surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound, applying stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2 coat of approved cement primer, carrying out putty work wherever required including necessary covering material and removal of splashing's & droppings from floors, walls including scaffolding, ladder as required etc. complete all as directed by the Engineer- in- Charge.

Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards (M/s. Hilux Ceiling Systems), 100% humidity resistance, non-combustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90 mm thick with connecting clips and resting on the periphery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc. to be made as per layout drawings and as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fasteners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centres . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sqm (Only calcium silicate false ceiling area will be measured for the purpose of payment) etc. all as per drawings and as directed by Engineer-in-Charge

Repainting of old painted surfaces with Calcecruda fuso hexagon subway textured High lighter paint of Asian paint or equivalent & Calcecruda Baroque Lace or metallic bandhej of approved shade and make over two coats of approved cement primer which consist of thoroughly scrapping old painted surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound, applying stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2 coat of approved cement primer, carrying out putty work wherever required including necessary covering material and removal of splashing's & droppings from floors, walls including scaffolding, ladder as required etc. complete all as directed by the Engineer- in- Charge.

Description of Work / Item(s)

Amount

PART-B: PH WORKS

Providing and fixing in position following Vitreous China Wall Hung type Wash down pattern water Closet consisting following items of work:- i) Providing Vitreous China wall hung type wash down pattern Water Closet ( EWC ) conforming to IS 2556 (part XVI) with integral "P" trap outlet with water seal not less than 50 mm with vent and necessary C.I. brackets supports. ii) Providing thermosetting or thermoplastic Seat & cover conforming to IS 2548, fixing seat & cover for water closet as per manufacturer's specification including the cost of corrosion resistant hinges, bolts, nuts, non-ferrous or S.S washer etc. all complete. iii) Fixing the Water closet in position, jointing the trap, water closet and CI/UPVC pipe by Epoxy grout or Rubber seal as per pipe manufacturer. iv) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to its original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps with white / matching colour cement etc. all complete. v) Testing the system to the full satisfaction of the Engineer-in-Charge.

Vitreous China European Extended wall mount Water Closet of Carlton Glitz French Gold with slow falling seat cover of CERA or equivalent

Providing and fixing first Quality Vitreous China hand wash Basin Consisting following items of work. - i) Providing Wash Basin and placing it in position as shown in the drawing or as per manufactures specification or as directed including finishing the joints with white / matching colour cement all complete. ii) Fixing various CP fittings such as Waste Coupling, Bottle Trap including fixing 32 mm minimum 10kg class PVC pipe conforming to IS:4985 (and fittings conforming to IS:7834). Placing and fixing Waste Pipe from Bottle trap to adaptor / Nahani trap / Floor Trap. iii) Fixing the Wash Basin in position, including providing M.S./C.I. Brackets & Screws for the basin. iv) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting, finishing the gaps etc. all complete as directed by Engineer-in Charge. v) Fixing Vitreous China under / over the counter / semi recessed type Wash Basin of following model and make conforming to IS 2556 and placing it in position with the granite platform as shown in the drawing or as directed including finishing the joints with white cement all complete. vi) Testing the system to the full satisfaction of the Engineer in Charge

Vitreous China Wash Hand Basin of Campa Glitz model of Cera or equivalent table tap model.

Providing & fixing in position best quality bevelled edge plane Glass Mirror with PVC frame of following size with 6 mm thick marine ply wood (confirming to IS:710), fixed with required numbers of CP brass cup screws and caps, washers etc. including drilling holes, providing & fixing rawl plug in RCC/ brick wall, wooden packing behind the mirror if necessary, reinstating the damages to its original condition etc. all complete as directed by EIC.

Designer plain glass Mirror of size 1300 mm x 1550 mm with 6 mm thick marine ply wood (confirming to IS:710:2010) backing & PVC moulded frame of approved shade or as directed by the E.I.C

Providing & fixing in position following approved quality water saving brass material PVD coated fittings / Fixtures of 15 mm nominal dia. with ISI mark / approved make of following type including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints. if any, including cleaning etc. complete all as per specification.

French gold finish Chelsea angle Cock with wall flange of Cera Cat.No.F1016201FG or approved equivalent make

French gold finish Chelsea Bib Cock with wall flange of Cera Cat.No.F1016151FG or approved equivalent make

French gold finish Chelsea single lever basin mixer with wall flange of Cera Cat.No.F1016451FG or approved equivalent make

French gold finish H type Knob for dual flush arrangement including any concealed accessories required of Cera Cat.No.B1120101FG or approved equivalent make

French gold finish Chelsea Dribble two function health faucet of CeraCat.No.F8035101FG or approved equivalent make

French gold finish Chelsea Wall mixer with wall flange of Cera Cat.No.F1016401FG or approved equivalent make

French gold finish 300x300 mm square shower with arme of Cera Cat.No.F7010214FG or approved equivalent make

French gold finish tumbler holder of Cera Cat.No.F5014107FG or approved equivalent make

Providing and fixing the following Brass material PVD coated Bathroom/toilet accessories of following make and fixing on the wall using C.P. brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the Engineer In charge.

French gold finish paper holder with lid of Cera Cat.No.F5014110FG or approved equivalent make

French gold finish towel rod 450mm length of Cera Cat.No.F5014104FG or approved equivalent make

French gold finish Napkin ring(square) of Cera Cat.No.F5014115FG or approved equivalent make

French gold finish robe hook of Cera Cat.No.F5014108FG or approved equivalent make

French gold finish liquid soap dispenser of Cera Cat.No.F5014111FG or approved equivalent make

French gold finish soap dish of Cera Cat.No.F5014116FG or approved equivalent make

French gold finish towel rack 600mm length of Cera Cat.No.F5014131FG or approved equivalent make

Providing and fixing of premium grade Safety-tempered glass, luxuary standard bath room partition glass of approved specification and make 1 fixed glass & 1 door (hinges on wall) of required Size: 1 no. fixed glass & 1 no. swing glass, Hardware 2 nos. wall-to-glass hinges-90, 1 no. handle, 2 nos. wall brackets, 1 no. floor bracket, 1 no. stabilizer rod with 2 nos. wall-end & 1 no. open-end connectors, 2 nos. profile strips ,1 no. magnetic strip-180 etc. all as per drawings and as directed by Engineer-in-Charge

Supplying & fixing on Exposed surfaces the following dia. Galvanised iron pipe of specified class consisting following items of work:- i) Supplying galvanised mild steel screwed and socketed pipe conforming to IS:1239 (part-I) with galvanised mild steel or wrought steel fittings conforming to IS:1239 (part-II). ii) Laying and fixing the pipe and specials on exposed/concealed surfaces to correct line, level and plumb for water supply line, overflow and vent using screws, rawl plugs, wooden gutties and 'U' type G.I clamps having not less than 2 mm thick. The pipeline exposed as per the site requirement. iii) Testing the pipe line to a hydraulic pressure of 10 Kg / Sq.cm for leak proof joint. iv) Making leak proof threaded joints using White zinc, Spun yarn etc. including cutting the pipe, threading and the cost of jointing materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. proof joints. vi) Painting the pipe line after testing with two coats of flat oil paint of approved make and shade over a coat of approved primer.

1). 15 mm (½") n. size

Supplying and laying below the ground or floor, the following diameter uv-stabilized Chlorinated Poly Vinyl Chloride (C-PVC) pipe line of specified class, consisting the following items of work:- i) Supplying CPVC pipes and all required CPVC plain / brass threaded fittings, SDR - 11 having thermal stability for hot & cold water supply of approved make conforming to IS:15778 with ISI mark for CPVC pipe having nominal size up to 50 mm and conforming to ASTM F 441 (IPS SERIES) Schedule 40/80 for CPVC pipe having nominal size 65 mm (2½”) and above. ii) Laying and fixing the pipe and specials below the ground or floor to correct line, level and plumb for water supply line. iii) Making leak proof threaded/welded joints. Including cutting the pipe, cleaning, marking, jointing, etc. and including the cost of jointing materials. iv) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. v) Providing and fixing C-PVC weldable / threaded fittings such as Union, Nipples, Bends, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc.vi) CPVC pipes and fittings shall be of same brand. iv) Testing the pipe line as per relevant code to a hydraulic pressure of 10 Kg/Sq.cm to assess leakages if any, rectifying the defect, retesting etc till water tightness of pipe line is ensured NOTE:- 1) The rate shall also include for cPVC pipe & specials required for making connections with the existing GI / CPVC pipe line laid by other agency. 2) All threaded joints shall be made with brass threaded fittings Only. 3) Excavation and refilling shall be paid under relevant item.

20 mm(¾") n.size (SDR-11 as per IS:15778)

40 mm (1½") n.size (SDR-11 as per IS:15778)

Providing uPVC Floor Trap/ Nahani Trap of following size having not less than 40mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent/ as per manufacturer's recommendation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 150 x 150 mm size top tile with central strainer & flat cover/ flush strainer, closing the side inlets with plugs if required etc. complete all as per specification and as directed by the Engineer in charge.

Providing and fixing Multifloor trap of 110 x 75 x 50 size of approved make with C.P. Brass/SS 3 pc top tile & flush strainer, Satin finish., including Chilly /Cockroach Trap of approved make in C.P Brass / SS.

Description of Work / Item(s)

Amount

PART-C :FURNITURE (UPGRADATION) WORKS

Providing second class teak wood work in frames of bed, study tables, dresser tables, side tables, drawers and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing, making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the surface that will come in contact with walls, joining materials, labour and including finished in correct line & level as specified etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing and making wooden chairs using first class C.P teak wood of required sizes and sections as per patterned and design approved by Head Architect including providing seating & back cushion with approved fabric for making complete wooden chairs etc. as patterned & design approved by architect including cutting & jointing the wood, providing and fixing necessary screw and gluing the lap joints or tong & grove joints with synthetic adhesives fevicol in proper line and level including cost of fixing, making & jointing etc. all complete as per specification and drawing and as directed by the Engineer-in-Charge.

Providing and making wooden study table cum ledge using first class C.P teak wood of required sizes and sections as per patterned and designe approved by Architect including cutting & jointing the wood, providing and fixing necessary screw and gluing the lap joints or tong & grovee joints with synthetic adheshesiive fevicol in proper line and level including cost of fixing, making & jointing etc. all complete as per specification and drawing and as directed by the Engineer-in-Charge.

Providing and fixing carpet having 75 % wool & 25 % silk and min thickness 10 to15 mm, as per approved design, including material, labour, wastage, transportation and taxes. etc. complete all as per drawings & specification and as directed by Engineer-in-Charge

Providing, supplying and installation of a 600 mm dia circular coffee table with 1st class C.P. teak wood with designing, crafting, moulding including 18 mm thick approved composite marble on top with fine finished including cutting moulding, placing pasting with adhesive including labour, material, tools & plant etc. all complete as per drawings, specification and as directed by Engineer-in-Charge.

Providing and fixing superior quality roller blinds of size 3000x 2400 mm. of M/s. VISTA or approved equivalent manufacturer with approved best quality fabric with panting design as aproved , including control unit, head rail, roller tube, bottom rail, operating chain and fixing arrangement as per specification and including accessories required for fixing in position including labour material etc complete all as per approved sample, design, pattern complete all as per manufacterers specification ond as directed by the Engineer-In-Charge.

Supply and installation of high-quality curtain channels or rods. The channels should be made from durable materials with a sleek finish. Installation includes mounting the channels and ensuring smooth curtain operation etc. all complete as per drawings and as directed by Engineer-in-Charge

Providing, Fixing & assembling/ fixing at site Table top/ cupboard /shelves /wall cabinets etc. using following material of approved quality machine pressed phenol formal dehyde bonded marine plywood of IS 710 latest revision, and both face lamination with 1 mm thick lamination on top /exposed surface and 0.80 mm thick lamination on bottom / inner surface of approved shade and make on both faces , all edges covering with 12 mm thick teak wood Patti or other approved equivalent , using approved glue for pressing, approved quality PVC wire manager for taking out all wiring etc. and carefully fixing to the vertical partition including all materials adhesives, S S screws labours, materials, wastages etc. all as per approved drawing and specification and as directed by EIC. Note:- No separate measurements for payment will be made for decorative laminate.

19mm thick marine ply. With both side laminate (1.00 mm thick laminate on top /exposed surface and 0.8 mm thick laminate on bottom / inner surface)

12mm thick marine ply. With both side laminate (1.00 mm thick laminate on top /exposed surface and 0.8 mm thick laminate on bottom / inner surface)

Providing and fixing wall panelling at all floors and locations consisting of following thickens water proof marine ply wood Anchor or approved make conforming to IS 710 latest version on aluminium fame work on wall including suitable screw of required size and approx. 3.5 mm thick teak veneer of approved make and shade and providing 3 mm wide grooves between veneer panels of different shades ( dark and light colour) including applying 3 coats of Acrylic Polyurethane coatings (PU base Polishing) of Asian or equivalent make on new / old wooden surface after preparing the surface, including scaffolding, tools, screws, rawal plug etc. including removing damaged part and replace with new one including making cut out for electrical fittings and fixtures with shutter handle, hinges etc. complete all as per specification and drawing and as per directed by the Engineer-In-Charge. NOTE:- Aluminium frame work shall be paid on relevant Item.

19 mm thick marine ply. With 3.5 mm thick teak veneer on top /exposed surface.

12 mm thick marine ply. With 3.5 mm thick teak veneer on top /exposed surface.

Providing designing, supplying and fixing 1st class teak wood panel approx. of size 450 mm X 450 mm X 25 mm thick with CNC cutting, carving, crafting, designing and fixing with proper size, line & level and plumb as per approved patterned & design including fixing in line and level with commercial adhesive including precise fitting, securing the panels, and finishing etc. complete all as per drawings, specification and design approved by Architect and Engineer-in-Charge

Providing and fixing second class teak wood wall panelling at all floors and locations consisting of following thickens water proof marine ply wood Anchor or approved make conforming to IS 710 latest version fixed on wooden fame work on wall including suitable screw of required size and providing grooves between panels of different shades ( dark and light colour) including applying 3coats of Acrylic Polyurethane coatings (PU base Polishing) of Asian or equivalent make on new/old wooden surface after preparing the surface, scaffolding, tools, screws, rawal plug etc. including making cut out for electrical fittings and fixtures with shutter handle, hinges etc. complete all as per specification and as directed by the Engineer-In-Charge. NOTE:- Aluminium frame work shall be paid on relevant Item.

19 mm thick marine ply.

12 mm thick marine ply.

3.5 mm thick Veneer.

Supply and installation of PVC heavy duty fluted panel including all necessary materials, labor, tools and equipments. panel should be high quality,UV- stabilized PVC, resistanc to moisture, fire and termite damage, with minimum thickness of 12 mm. work includes surface preparation, cutting pannels to size, erection of supporting substructure if required secure fixing using fastners/screws/adhesives, joint treatment with sealents, and ensuring proper alignment and finish as per specification and as directed by the Engineer-in- Charge

Providing, supply and installation of 12 mm thick bison board of approved make and size for partitions or panelling fixing on aluminium fame work on wall including cutting in size, pasting / fixing in line and level with SS screw / adhesive, scaffolding, tools and plant, labour including wastage if any all as per specification and as per approved drawing and finishing etc. all complete as per drawings and as directed by Engineer-in-Charge

Providing, making and fixing headboard of bed of size 2.25 m X 0.80 m with consisting of 19mm ply @ back and finished with high-density PU foam padding including upholstered in premium quality fabric fixing of head board with proper fixing arrangement with adhesive including the headboard should be mounted securely to the wall including upholstered and both are comfort and aesthetics etc. all complete as per drawings and as directed by Engineer-in-Charge

Providing, making and fixing mirror framed with BTC decorative teak wood moulding. The mirror should feature a high-quality reflective surface and be securely mounted on the dresser table etc. all complete as per drawings and as directed by Engineer-in-Charge

Supply and installation of art piece ledges measuring 16 inches by 8 inches by 5 inches. Ledges should be crafted from premium materials and securely mounted to display artwork etc. all complete as per drawings and as directed by Engineer-in-Charge

Applying three coats of Acrylic Polyurethane coatings (PU base Polishing) of Asian or equivalent make on new / old wooden surface table top, cladding & cabinet including preparing the surface with scraping and removing old damaged polish etc. with approved tint & make to obtain mirror finish over a coat of wood filler including spray gun, sand papering, cleaning, filling up holes, cracks & crevices with approved quality wood filler including labour, tools & plants etc. making even surface with line, level & plumb etc. complete all as directed by the Engineer-In-Charge.

Providing and fixing following size of decorative BTC teak wood moulding for frames as per requirement of department for making of printing / photo frame including PU polish, material, labour, wastage, transportation, taxes and necessary fixing arrangement etc. complete all as directed by Engineer In charge.

Size 50 mm x 75 mm

Size 38 mm x 19 mm

Size 40 mm x 40 mm

Size 40 mm x 25 mm

Providing & fixing following thickness of clear float / ordinary plain / frosted / bajara sheet glass/ for M/S Triveni / Shree vallabh / IAG / /Modi Guard / Saint Gobin or other approved equalling manufacture and fixing with aluminium frame work, doors, windows including facing aluminium channel beading and providing and fixing two way EPDM / PVC casketing to ensure water and air tightness and neoprene cushions / gasket accommodated in grooves, necessary bronze anodised screws etc. including wastage in cutting, transportation etc. complete all as per specification and drawing and as directed by the Engineer-in-Charge.

a) 6.0 mm thick toughen, float, and clear plain glass. With EPDM gasket.

Supplying, fabricating and fixing in position at all floors factory made Aluminium grill /Aluminium sliding/top hung/fixed/ adjustable louvered windows, ventilators & partition with rivet joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size piout hinges in aluminium door etc., of approved manufactures for following types with extruded sections of Jindal / Indol / Aluminax or other approved equivalent make of approved sections with size and weights as directed for frames and shutters(including wastages if any) wherever mitred joints required confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame, shutter, glass, grill and depositing same to dept. store etc. all complete generally as per drawing, specifications etc., all as directed by Engineer-in-Charge. Note: Payment shall be made per Kg basis. Aluminium sections such as shutter, frames, track window / double glazed unit section /door frame/beading channel for glass adjustable louvers etc., shall only be measured linearly as per actual/finished cutting size nearest to centimetre and multiplied with sectional weight of the individual section and the total quantity of aluminium section will be arrived at for payment without any allowance for wastage.

a) All Aluminium sections for Partition, window, grills, etc. and other work.

Description of Work / Item(s)

Amount

MISCELLANEOUS ELECTRICAL AND AC WORKS

Disconnection & dismantling of the all existing electrical accessories like Fans,lighting fixtures, Gyser, window type ACs,concealed switch boxes whereever requried etc. in the area under renovation as per the drawings attached and depositing same at DCSEM stores, Anushaktinagar/TV stores Trombay including loading, unloading & trasnportation and as per instruction of EIC.

Casing capping & Conduit Pipes. Supply installation testing & commissioning of 25 x 16 mm casing – capping on surface of slab / wall / column fixed with nylon / rawal plug, GI wood screws at the intervals of 300mm includes providing the tags for wires inside casing capping for bunching to avoid hanging of wires at the intervals of 600mm as per the instruction of Engineer-in-charge.

Supply installation testing & commissioning of 25mm dia rigid HMS PVC of conduit with all required accessories like junction box , bend, etc. on surface of slab / wall / column fixed with PVC spacer saddles , nylon / rawal plug, GI wood screws at the intervals of 300mm as per the instruction of Engineer-in-charge.

Supply installation testing & commissioning of 19mm dia rigid HMS PVC of conduit with all required accessories like junction box , bend, etc. on surface of slab / wall / column fixed with PVC spacer saddles , nylon / rawal plug, GI wood screws at the intervals of 300mm as per the instruction of Engineer-in-charge.

Supply installation testing & commissioning of 25 mm dia FRPP flexible conduit with PVC gland on surface of slab / wall / column fixed with PVC spacer saddles, nylon / rawal plug, GI wood screws as per the instruction of Engineer-in-charge.

Making of grooves by cutting the floor tiles /floor/wall with cutter machine and supply & laying HMS PVC of 19mm dia rigid conduit with all required accessories line junction box , bend, etc. for laying power & control cable/ wires as required, refilling the grooves with cement concrete & finishing the surface as per original.

Making of grooves by cutting the floor tiles /floor/wall with cutter machine and supply & laying HMS PVC of 25mm dia rigid conduit with all required accessories line junction box , bend, etc. for laying power & control cable/ wires as required, refilling the grooves with cement concrete & finishing the surface as per original.

Supply installation testing & commissioning of flexible wires of 1100V grade, FRLS PVC insulated multi stranded copper wires in existing concealed conduit of following sizes.

Suplly, installation,testing and commissioining of 25A,DP MCB with enclosure as controlling switch including all accessories excluding wire & conduit (Wires & conduit will be paid as per respective items).

Replacement of existing modular switches with Metal frame & plastic cover plate matching with existing wall wooden panel shade.

1/2M plate with cover

3M plate with cover

4M plate with cover

6M plate with cover

8M plate with cover

6X2M plate with cover plate

6X3M plate with cover plate

Supply installation testing & commissioning of 6 X 2 module wooden finish mdoular plate with 8 no.s of modular bell call indicators with registor, complete with 4 no.s of modular buzzers, concealed box, cover plate, frame & label similar to Myrius of M/s. Legrand make.

Recess mounted LED lighting Fixture Supply, installation, testing & commissioning of recess mounted round/square downlight LED fixture with min efficacy :- 100lm/W, min.lumen output :- 2100 Lm , CCT :- 3000 min.CRI :- 80 min. P.f :- 0.95 min. I.P :- 20 Housing:- Pressure die cast Al. sutiable for 150/140mm dia cut-out and as per tender specification. Note:-The fixture to be got approved by department before manufacturing/supply. If the cutout at site is more than the specified product ,then an additional adopter (outer ring) to mount which would be in electrical contractor scope.Warranty certificates shall be submitted to department. Scope work also includes dismantling of the exisitng fixtures.

Supply, installation, testing & commissioning of recess mounted round spotlight LED fixture with min efficacy :- 100lm/W, min.lumen output :- 700 Lm , CCT :- 3000 min.CRI :- 80 min. P.f :- 0.95 min. I.P :- 20 Housing:- Pressure die cast Al. sutiable for 95mm dia cut-out and as per tender specification. Note:-The fixture to be got approved by department before manufacturing/supply. If the cutout at site is more than the specified product ,then an additional adopter (outer ring) to mount which would be in electrical contractor scope.Warranty certificates shall be submitted to department.

Supply, installation, testing & commissioning of LED strip light with Aluminium profile & driver similar to model no. Pro Glow LED Strip Light 45W with Driver of M/s. Philips, complete with accessories & required hardware as required & instructed by E-I-C.

LED lighting Fixture Supply, installation, testing & commissioning of 12" LED picture light fixture similar to model no. Muziris of M/s. Philips make, complete with accessories on wall/ slab / beam by suitable anchor fasteners / coach screw/ SS screw etc. required hardware as required & instructed by E-I-C.

Supply, installation, testing & commissioning of LED Wall light fixture similar to model no. Nero single head wall light PH1768 (582086) of M/s. Philips make( Photo enclosed ), complete with suitable 8W Full Glow Glass LED Lamp of M/s Philips accessories on wall/ slab / beam by suitable anchor fasteners / coach screw/ SS screw etc. required hardware as required & instructed by E-I-C.

Supply installation testing & commissioning of LED tube light fixture similar to TMC 501 P 1 x T-LED 22W P3241 with 1 nos 2100Lm Tubelight warm white 3000K complete with mounting accessories on surface of slab / beam / wall with required hardware, interconnections between light point and light fixture with copper flexible TRS wire all as required & instructed by E-I-C.

Supply installation testing & commissioning of 10W LED wall light similar to model no.Propulsio Wall light of M/s. Philips make complete with mounting accessories on surface of slab / beam / wall with required hardware, interconnections between light point and light fixture with copper flexible TRS wire all as required & instructed by E-I-C.

Supply,installation, testing & commissioning of designer table lamp similar to model no.Jazz of M/s. Philips. Installation includes wiring the lamps and placing them on specified surfaces etc. all as per drawings and as directed by Engineer-in-Charge

Fans Supply installation, testing & commissioning of 1320 mm Ceiling fan with under light similar to Florrette UL BLDC+ of M/s. Havells (speed control with remote) with safety chains including interconnection to ceiling rose with 3C X 1.0 sq.mm flexible copper cable.

Supply, installation, testing & commissioning of 300mm sweep exhaust fan similar to model Ventilair DB of m/s. Havells complete with supply cord and 3 pin top.

Providing Ceiling fan hook fabricated out of 150mm x 150mm x 10mm (Approx.) MS sheet with 12mm MS rod hook wilded on MS sheet, holes on corners & painting with two coat of enamel paint over one coat of red oxide and with four nos. of anchor fasteners 10mm dia ( Approx.), all as required & instruction of Engineer-in-charge (Sample to be got approved)

Supply installation, testing & commissioning of 35 Ltr Storage type water heater similar to CDR DLX PLUS storage water heater of M/s Racold operating on 240V AC ,50Hz supply complete with all accessories. ISI marked, connecting to water heater point with minimum 3C X 1.5 sq.mm copper conductor flexible chord.

TVs Supply and installation of 43-inch LED television with high-definition display capabilities. Installation includes wall or stand mounting, connecting power and signal cables and calibrating the TV for optimal viewing etc. similar to Samsung 108 cm (43 inches) D Series Crystal 4K Vivid Ultra HD Smart LED TV UA43DUE70BKLXL (Black) and as directed by Engineer-in-Charge Other features are as follows: 1)Resolution: 4K Ultra HD (3840 x 2160) Resolution | Refresh Rate: 50 Hertz. 2)Display Features: Crystal Processor 4K | PurColor | 4K Upscaling | HDR 10+ Support | HDMI Black Level | Mega Contrast | UHD Dimming | Contrast Enhancer | Motion Xcelerator | Filmmaker Mode || Additional Features: Endless Free Content | Samsung Knox Security (Your privacy. Secured.) | ConnectShare | TV Key. 3) Sound Features: 20W Output- 2CH | Powerful Speakers with Q-Symphony | Object Tracking Sound | Bluetooth Audio | Adaptive Sound. 4) Smart TV Features : Bixby Voice Ready (Control your Crystal UHD TV with Bixby Voice through SmarThings App) | Works With AI Speaker (Alexa and Google Assistant) | Mobile to TV Mirroring | Sound Mirroring | Wireless TV On | Buds Auto switch | Web Browser | SmartThings Hub / Matter Hub / IoT-Sensor Funtionality | Apple AirPlay | Daily+ || Gaming Features: Auto Game Mode (ALLM) | VRR | HGiG.5) Connectivity options: 3 Hdmi Ports For Seamless Connectivity With External Devices | 1 X Usb-A Usb Ports To Connect Hard Drives Or Other Usb Devices | Wi-Fi | Bluetooth | Anynet+ (Hdmi-Cec) | Ethernet (Lan) Port | Rf In (Terrestrial)

Supply and installation of 55-inch LED television with high-definition display capabilities. Installation includes wall or stand mounting, connecting power and signal cables and calibrating the TV for optimal viewing etc. similar to Samsung 108 cm (43 inches) D Series Crystal 4K Vivid Ultra HD Smart LED TV UA55DUE70BKLXL(Black) and as directed by Engineer-in-Charge Other features are as follows: 1)Resolution: 4K Ultra HD (3840 x 2160) Resolution | Refresh Rate: 50 Hertz. 2)Display Features: Crystal Processor 4K | PurColor | 4K Upscaling | HDR 10+ Support | HDMI Black Level | Mega Contrast | UHD Dimming | Contrast Enhancer | Motion Xcelerator | Filmmaker Mode || Additional Features: Endless Free Content | Samsung Knox Security (Your privacy. Secured.) | ConnectShare | TV Key. 3) Sound Features: 20W Output- 2CH | Powerful Speakers with Q-Symphony | Object Tracking Sound | Bluetooth Audio | Adaptive Sound. 4) Smart TV Features : Bixby Voice Ready (Control your Crystal UHD TV with Bixby Voice through SmarThings App) | Works With AI Speaker (Alexa and Google Assistant) | Mobile to TV Mirroring | Sound Mirroring | Wireless TV On | Buds Auto switch | Web Browser | SmartThings Hub / Matter Hub / IoT-Sensor Funtionality | Apple AirPlay | Daily+ || Gaming Features: Auto Game Mode (ALLM) | VRR | HGiG. 5) Connectivity options: 3 Hdmi Ports For Seamless Connectivity With External Devices | 1 X Usb-A Usb Ports To Connect Hard Drives Or Other Usb Devices | Wi-Fi | Bluetooth | Anynet+ (Hdmi-Cec) | Ethernet (Lan) Port | Rf In (Terrestrial)

AIR CONDITIONING WORKS Split Air-conditioner: Supply, installation, testing and commisioning (SITC) of wall mounted 5 star rated Invertor hi-wall Split AC units working on R-32 refrigerant or CFC free refrigerant of follwing nominal cooling capacities as per technical specifications and instructions of Engineer-in-Charge. Note: 1.The outdoor unit shall be provided with 10 mm thick neoprene pads. 2.The price is inclusive of consumables, leak testing, refrigent gas that may be required to put the air conditioner into service and no extra payment shall be made for the same. 3.The cutout for regrigerant pipe cable and drain shall be included in scope and no extra payment shall be made for the same. 5. On site warranty of Compresser shall be min. 10 years and PCB shall be min. 5 year from date of supply of units. Warranty certificates shall be submitted for each units while supplying the units.

Minimum 6.2 KW or 1.8 TR cooling capacity Hi-Wall Split AC

Refrigerant Piping with Nitrile Rubber insulation (Combined Suction line & Discharge line): Supply, installation, testing and commissioning of Interconnecting refrigerant copper piping ( suction & discharge line) of suitable sizes for above split AC units duly insulated with closed cell tubular elastomeric nitrile rubber of minimum density not less than 33kg/cum of thickness 13 mm thick for size upto 19.05 mm dia. pipe and 19 mm thick for sizes above 19.05 dia pipes as per technical specifications, manufacturer's recommendations and instructions of Engineer-in-Charge. Note: Scope of work also includes the following: i) coating of the copper ppies with transparent anti corrosive primer before insulation. ii) The insulation shall be mechanically protected with a coat of polyshield of approved colour (starbond 30-36 or equivalent) of minimum 5 mil thickness.

Drain piping duly insulated: Supply, installation and commissioning of 25mm dia. rigid / flexible HD PVC piping duly insulated with closed cell elastomeric rubber insulation as per technical specifications and instructions of Engineer-in-Charge

Cabling: Supply & laying of following sizes of flexible copper power/control cabling to connect outdoor units with respective indoor units / power cable to connect power outlet to ODU/ IDU complete with end connections with suitable copper lugs as required all as per technical specification and instructions of Engineer-in-Charge.

4 core x 2.5 sq.mm flexible cable

3 core x 2.5 sq.mm flexible cable

PVC Truncking: Supply & laying of casing and caping (PVC trunking 100 mm (Width) X 50 mm(Depth)) for enclosing refrigerant tubing with insulation, drain line and electrical cable as per technical specifications and instructions of Engineer-in-Charge.

M.S. supports: Supply, fabrication & installation of M.S. stand for the ODU (outdoor unit) of AC unit as required fabricated out of M.S. flat of size (50 mm x 8 mm) and M.S. angle of size (50 mm x 50 mm x 8 mm) and safety guard of M.S. flat of size (12 mm x 12 mm) with suitablle opening for maintenance purpose of ODU unit, painting with two coats of synthetic enamel paint over one coat of red oxide primer of approved make & shade to all M.S. parts at all levels & elevations as required and as per technical specification and instructions of Engineer-in-Charge.

Dismantalling and safe removing the old existing window air conditioner including safely removal and packing of existing piping holes etc. depositing old AC at DCSEM stores, complete with all as per requirement and instructed by EIC.

AMBIKA ENTERPRISE (BID ID -3153367)

Reliable Enterprises (BID ID -3145232)

maxcool solutions pvt ltd (BID ID -3155274)

SUNLIGHT CORPORATION (BID ID -3154846)

AMBIKA ENTERPRISE (BID ID -3153367)

maxcool solutions pvt ltd (BID ID -3155274)

Reliable Enterprises (BID ID -3145232)

AMBIKA ENTERPRISE (BID ID -3153367)

maxcool solutions pvt ltd (BID ID -3155274)

AMBIKA ENTERPRISE (BID ID -3153367)

Reliable Enterprises (BID ID -3145232)

maxcool solutions pvt ltd (BID ID -3155274)

maxcool solutions pvt ltd (BID ID -3155274)

SUNLIGHT CORPORATION (BID ID -3154846)

Reliable Enterprises (BID ID -3145232)