Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.1 LAccepted-AOC N0 15 ASHOK NAGAR MAIN ROAD MES ROAD 3RD CROSS STREET EAST TAMBARAM CHENNAI 600 059 | CHENGALPATTU | TAMIL NADU | 600059 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹8.3 L+₹2,436.55 (0.29%)Rejected-AOC D 3 7TH BLOCK JAIN GREEN ACRES DHARGA ROAD ZAMIN PALLAVARAM CHENNAI 600 043 | CHENNAI | CHENNAI | TAMIL NADU | 600043 | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹8.3 L+₹2,727.50 (0.33%)Rejected-AOC PLOT NO 15 JAYASURIYA STREET GANGAI NAGAR KALLIKUPPAM AMBATTUR CHENNAI 600053 | CHENNAI | CHENNAI | TAMIL NADU | 600053 | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
₹8.3 L
EMD Value
₹16,600
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Nav Chennai
AGE(I) Navy Chennai Military Engineer Services Fort St George Rajaji Salai Chennai 600 009
REPAIRS TO JOINERY, WINDOWS, DOORS ETC TO MD AND OTM ACCN OF ZONE B AREA UNDER AGE(I) NAVY CHENNAI
2023_MES_607088_1
AGE(I)/NAVY/CHN/8410 of 2023 - 24
Open Tender
Civil Works
Item Rate
180 days
Chennai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
AGE(I) Navy Chennai
₹16,600
Yes
7 Sept 2023
30 Jun 2023
29 Jul 2023
30 Jun 2023
28 Jul 2023
14 Jul 2023
1 Jul 2023 - 7 Jul 2023
Amount
Taking down chowkhats with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.
Taking down Shutters of any description exc 1 sqm but not exc 2 Sqm each
Taking down Shutters of any description n. exc 1 sqm each
Taking down and refixing the same opening of door Shutters of any description exc 1 sqm but not exc 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.
Taking down and refixing the same opening of door Shutters of any description n exc 1 sqm but each and including easing and adjusting before fixing of door shutter complete all as specified and directed.
Demolition of Brickwork built in cement motar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
S&F for Aluminum powder coated frame with doors shutters, with one or more rebates, Aluminum Partitions sides and middle sections , Aluminum powder coated sliding three track windows of frame with shutters and Fixed types Aluminum ventilators with louvers including fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.complete all as specified and directed. Note : (a) Thickness of powder coating not less than 50 micron. (b) Weight of Aluminum sections to be measured only and misc items i.e rubber beading rollers handles, hinges and tower bolts and door stoppers, window locks etc deemed to including the quoted rates. (c) Wire mesh, Glass, door closer and Mortise lock will be measured and paid separately.
S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge. complete all as specified and directed.
S&F for Stainless steel wire cloth. 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.
All as per Sl item No. 11 above but fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors including teak wood beading for wooden doors etc etc complete all as specified and directed.
S&F for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, including teak wood beading for wooden glazing windows in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, including teak wood beading for wooden glazing windows in square not exc 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and directed.
S&F for plain sheet glass,3 mm thick, ordinary quality and glazing and fixed including teak wood beading for wooden glazing windows in square not exceeding 0.5sqm in each complete all as specified and as directed
S&F for plain sheet glass,3 mm thick, ordinary quality and glazing and fixed including teak wood beading for wooden glazing windows in square not exceeding 0.5sqm in each etc including hacking out old broken glass all as specified and directed.
S&F for plain sheet glass,4 mm thick, ordinary quality and glazing alu windows and fixed with aluminium glazing clips exceeding 0.5sqm in each complete all as specified and as directed
S&F for plain sheet glass,4 mm thick, ordinary quality and glazing aluminum fixed /sliding windows and fixed with aluminium glazing clips exceeding 0.5sqm in each including hacking out old broken glass all as specified and directed.
S&F for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in each complete all as specified and as directed
S&F for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in each including hacking out old broken glass all as specified and directed.
M&L for 6mm thick hylam solid sheet decorative grade 1 (with BWR resin) with decorative face veneers on one side and other side white; and fixed to doors and Partitions etc and fixed with aluminium glazing clips etc complete all as specified and as directed
All as per Sl item No. 21 above but fixed in repair to aluminium Partitions and Aluminium doors etc complete all as specified and directed.
M&L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and aluminium Partetions and Aluminium doors including fixed in repair complete all as specified and as directed
S&F for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.
S&F for 35 mm thick 2nd class Hard wood rail and style of Plain framed, panelled shutter panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
S&F for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative both face veneer with lipping / frame to match complete all as specified.
S&F for 35 mm thick 2nd class hardwood factory made Glazed and skeleton fully and partially door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), any numbers edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified.
S&F for 30 mm thick 2nd class hardwood factory made Glazed and skeleton windows,ventilators, etc, open rebated and prepared to receive glass, gauze, etc. (with sash bars), any numbers edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats complete all as specified.
S&F in repair for aluminium powder coated tubular fancy type curtain rail/ drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etc complete all as specified and as directed. Make:- Allishan-Ivory pearl interior series
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed
S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed
S&F for 75mm size, SS Butt hinges heavy duty, , and fixed complete all as specified and directed
All as per Sl item No. 32 above but fixed in repair
S&F for 125mm size, SS Butt hinges heavy duty, , and fixed complete all as specified and directed
All as per Sl item No. 34 above but fixed in repair
S&F aluminium handles cast type anodised for 100 mm complete all as specified and directed
All as per Sl item No. 36 above but fixed in repair
S&F aluminium handles cast type anodised for 150 mm complete all as specified and directed
All as per Sl item No. 38 above but fixed in repair
S&F for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed
All as per Sl item No. 40 above but fixed in repair
S&F for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed
All as per Sl item No. 42 above but fixed in repair
S&F for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed
Ditto-All as per Sl item No. 45 above but fixed in repair
M&L for 2nd class HW Plain fillets. square, rectangular or triangular in section exc 13 but n exc 25 Sq.cm, bullnosed, splayed, chamfered or rounded on one edge or face fixed with nails and screws etc complete all as specified and as directed.
M&L for 25mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and 6mm thick 1st class teak wood beading around the shutters and any other balance portion 1mm thick decorative tape fixed with favicol, fixed with screws to timber frame work for shelfs etc including fixed in repair complete all as specified and as directed.
All as per Sl item No. 47 above but 12mm thick
S&F for 30 mm Width of flaps (when open) Continuous (piano) hinges, brass, bright finish or electrogalvanised
S&F for 75mm size,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed
S&F for Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed.
S&F for Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed
S&F for Ball catches/ magnetic and connected plate fixed to shutter and frame as per sample complete all as specified and directed
Taking down cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaes in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed
M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement complete all as specified and directed. ( Note : WPC shall be measured and paid separately)
Supply only Integral water proofing compound complete all as specified.
M&L for preparation of newly plastered / concrete surfaces and applying two coats of oil bound distemper/emulsion over a coat of primer over 1mm thick (one or more coat ) of birla wall care putty ccomplete all as specified and directed. (Make :- Interion grade acrylic emulsion shall be of the make : Asian paints "Premium Emulsion", Nerolac Paints "Beauty Gold Acrylic Emulsion, ICI Dulux "Super Smooth Acrylic Emulsion, Berger " Rangoli Acrylic Emulsion).
All as per Sl item No. 58 above but one coat of oil bound distemper/emulsion on old decorative surfaces complete all as specified and directed
M&L for Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed. (The makes of exterior grade acrylic emulsion shall be : Asian Paints " Apex Ultima", Nerolac paints " Excel Anti Peel Emulsion", ICI Dulux " Weather Shield Max / Ultra Clean Emulsion", Berger"Long Life 7")
S&F in repairs Door closer hydraulically of Aluminium (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
M&L for 12-15 mm thick green Marble of any shade (table rubbed and polished) laid and jointed in flooring strips, step type window cills and jambs etc over and including 15mm thick screed bed/ backing coat in CM 1:6 complete all as specified and directed
M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
lakshmibuilders
Banyan Engineers and Contractors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .