Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 CrAdmitted-Finance | ₹1.8 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.0 Cr+₹16.3 L (8.89%)Admitted-Finance OFFICE NO 208 B WING 2ND FLOOR GROMA HOUSE PLOT 14C SECTOR 19 VASHI NAVI MUMBAI VASHI NAVI MUMBAI MAHARASHTRA 400705 UDYAM MH 19 0041442 | THANE | MAHARASHTRA | 400705 | ₹2.0 Cr+₹16.3 L (8.89%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technically not suitable |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical EMD/Fee not received |
| Sl No | Description | Qty | Unit | M/s Associated Engineers L1 | Yogiraj Powertech Pvt Ltd. L2 |
|---|---|---|---|---|---|
| 1.00Supply, installation, testing & commissioning of double skin Air Handling Unit at Hi-Tech facility, CDM as per the following and clause No. 1 of Technical Specification of the tender. | |||||
| 1.10 | Air flow/ Tonnage : 10000 CFM/25 TR, Static pressure of fan : 50 mm of WG. | 2 | Set | 4,80,000 ₹9,60,000 Lowest | 6,18,925 ₹12,37,850 |
| 2.00 | Dismantling and shifting of existing 25 TR capacity AHU, associated valves & piping etc. located at Hi-Tech facility, CDM as per clause No. 2 of Technical Specifications. | 2 | Set | 30,000 ₹60,000 | 23,642 ₹47,284 Lowest |
| 3.00 | Supply, installation, testing & commissioning of 20" dia wafer type butterfly valves with counter flanges in chilled water pipe lines as per clause No. 3 of Technical Specifications. | 2 | Each | 2,70,000 ₹5,40,000 | 2,48,980 ₹4,97,960 Lowest |
| 4.00 | Cutting, dismantling and shifting of 18" dia. chilled water piping temporary connections and providing of 20 mm thick MS dummy plate with flanges and hardware as per clause No. 4 of Technical Specifications. | 40 | Mtr | 2,500 ₹1,00,000 Lowest | 2,867 ₹1,14,680 |
| 5.00 | Repairing of thermal insulation provided on overhead chilled water piping headers of size 18" dia. to 30" dia. as per clause No. 5 of Technical Specifications. | 100 | Sq. Mtr | 4,500 ₹4,50,000 | 591 ₹59,100 Lowest |
| 6.00 | Supply, installation, testing & commissioning of induced draft FRP cooling tower of capacity 25 TR refrigeration output (min) evaporator load complete with FRP basin, fan assembly, motor, nozzles, fills, eliminators, fan guard and all standard accessories and dismantling and shifting of existing FRP cooling tower as per Clause No. 6 of Tender Specifications | 1 | Set | 2,75,000 ₹2,75,000 | 1,60,766 ₹1,60,766 Lowest |
| 7.00 | Supply, fabrication and installation of SS 304 crimped wire mesh fills assembly of size 1.2 Mtr length x 0.6 Mtr Width x 0.6 Mtr Height as per clause No. 7 of technical specifications of the tender | 196 | Each | 24,000 ₹47,04,000 | 20,558 ₹40,29,368 Lowest |
| 8.00 | Supply, fabrication and installation of 3 mm thick GI sheets with MS HDG supporting angles for cooling tower inlet air openings of cooling tower No. 7 & 8 of CAP, TSD as per clause No. 8 of Technical Specifications. | 15 | Sq. M | 5,000 ₹75,000 Lowest | 5,478 ₹82,170 |
| 9.00Emergency break down jobs as per clause No. 9 of Technical Specifications of the tender. | |||||
Tender Value
₹1.9 Cr
EMD Value
₹4.4 L
Closing Date
4 Oct 2024, 6:00 pmClosed
Chief Engineer and Director, ESG
Chief Engineer and Director, Engineering Services Group BARC, Trombay, Mumbai-400085
BARC TSD ET 22 2024 25 Supply, installation, testing and commissioning of low side air conditioning equipments, MS structure and provision for emergency break down repair of chilled water lines at various locations, BARC, Trombay, Mumbai 400085
2024_BARC_825466_1
BARC/TSD/ET/22/2024-25
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
548 days
CAP, TSD, BARC, Trombay, Mumbai
As per NIT Criteria
8 documents required · 8 mandatory
₹0
₹4.4 L
16 Dec 2024
11 Sept 2024
9 Oct 2024
11 Sept 2024
4 Oct 2024
11 Sept 2024
11 Sept 2024 - 25 Sept 2024
Amount
Supply, installation, testing & commissioning of double skin Air Handling Unit at Hi-Tech facility, CDM as per the following and clause No. 1 of Technical Specification of the tender.
Air flow/ Tonnage : 10000 CFM/25 TR, Static pressure of fan : 50 mm of WG.
Dismantling and shifting of existing 25 TR capacity AHU, associated valves & piping etc. located at Hi-Tech facility, CDM as per clause No. 2 of Technical Specifications.
Supply, installation, testing & commissioning of 20" dia wafer type butterfly valves with counter flanges in chilled water pipe lines as per clause No. 3 of Technical Specifications.
Cutting, dismantling and shifting of 18" dia. chilled water piping temporary connections and providing of 20 mm thick MS dummy plate with flanges and hardware as per clause No. 4 of Technical Specifications.
Repairing of thermal insulation provided on overhead chilled water piping headers of size 18" dia. to 30" dia. as per clause No. 5 of Technical Specifications.
Supply, installation, testing & commissioning of induced draft FRP cooling tower of capacity 25 TR refrigeration output (min) evaporator load complete with FRP basin, fan assembly, motor, nozzles, fills, eliminators, fan guard and all standard accessories and dismantling and shifting of existing FRP cooling tower as per Clause No. 6 of Tender Specifications
Supply, fabrication and installation of SS 304 crimped wire mesh fills assembly of size 1.2 Mtr length x 0.6 Mtr Width x 0.6 Mtr Height as per clause No. 7 of technical specifications of the tender
Supply, fabrication and installation of 3 mm thick GI sheets with MS HDG supporting angles for cooling tower inlet air openings of cooling tower No. 7 & 8 of CAP, TSD as per clause No. 8 of Technical Specifications.
Emergency break down jobs as per clause No. 9 of Technical Specifications of the tender.
Supply, fabrication, installation, testing & commissioning of MS ERW pipe line up to 150 mm dia.
Supply, fabrication, installation, testing & commissioning of MS ERW pipe line above 150 mm dia.
Supply and installation of GI 50 mm dia. class 'C' drain piping with Tees, bends, elbows, fittings and pipe supports
Supply, installation, testing and commissioning of 150 mm dia SS pressure gauge with siphons
Supply, installation, testing and commissioning of dial type temperature gauge with SS 304 bar stoke type thermowell and all accessories
Supply and installation of TF quality 50 mm thick thermocol insulation in pipe section along with cement plaster and painting
Supply and installation of 19 mm thick closed rubber cell insulation
Supply and installation of 24 G aluminium cladding
Emergency breakdown repair by welding of pipe line and structural material complete with final run and DP test.
Supply, fabrication and installation of MS structure and MS HDG structure as per clause No. 17 of Technical Specifications of the tender.
MS structure complete with two coats of red oxide and two coats of enamel paint
MS HDG structure
Carrying out civil work as per clause No. 18 of Technical Specifications of the tender.
Casting of PCC (1:2:4)
Casting of RCC (M30 grade)
Excavation of dry soil including backfilling and surface finishing
Excavation of wet soil including backfilling and surface finishing
Excavation of rock/road cutting including backfilling and surface finishing
Supply of paint and painting of pipe lines, valves, chequerred plates and structural work as per clause No. 19 of Technical Specifications of the tender.
Providing two coats of enamel painting
Providing two coats of red oxide
Supply, installation, testing and commissioning of the following size gate valves with counter flanges, 6mm thick neoprene rubber gasket, GI nut & bolts, washers as per clause No.20 of Technical Specifications of the tender.
10" dia cast iron flanged type gate valve (Pressure rating: PN16)
8" dia cast iron flanged type gate valve (Pressure rating: PN16)
6" dia cast iron flanged type gate valve (Pressure rating: PN16)
4" dia cast iron flanged type gate valve (Pressure rating: PN16)
3" dia cast iron flanged type gate valve (Pressure rating: PN16)
2" dia flanged type gun metal gate valve (Pressure designation: Class 2)
1" dia screwed type gun metal gate valve (Pressure designation: Class 2)
Supply, installation, testing and commissioning of the following size globe valves with counter flanges, 6mm thick neoprene rubber gasket, GI nut & bolts, washers as per clause No.21 of Technical Specifications of the tender.
3" dia. flanged type Class-150 Cast Iron globe valve
2" dia. flanged type Class-150 Cast Iron globe valve
Supply, installation, testing and commissioning of non return valves (NRV) of the following sizes and as per clause No. 22 of technical specifications of the tender.
6" Dia. non return valve (Pressure rating: PN16)
4" Dia. non return valve (Pressure rating: PN16)
3" Dia. non return valve (Pressure rating: PN16)
2" Dia. non return valve (Pressure rating: PN16)
Supply, installation, testing and commissioning of 'Y' type strainers of the following size as per clause No. 23 of Technical Specifications of the tender.
6" Dia. flanged type cast iron
4" Dia. flanged type cast iron
3" Dia. flanged type cast iron
Supply, installation, testing and commissioning of G. I. Ducting of following thickness and as per Clause No.24 of Technical Specification of tender.
20 SWG (Standard Wire Gauge)
22 SWG (Standard Wire Gauge)
Supply, installation, testing and commissioning of Aluminium Powder Coated Grills with damper as per Clause No. 25 of Technical Specification of tender.
Segregation of metal scrap, non metal scrap & debris lying outside CAP building and transporting metal scrap to Trombay Village Store and debris to dumping ground inside BARC premises as per Clause No. 26 of Technical Specifications of the tender.
Pick-up light vehicle viz. TATA Aria/TATA Sumo gold or suitable vehicle with driver including BA-IV norms on hiring basis for the use of Site Engineer of TSD for 6 days a week (from 8:00 am to 20:00 pm ) for carrying out day-to day official movement within Mumbai and inside BARC premises as per clause No. 27 of Technical Specifications of the tender.
Safe handling & decomposition of existing insulation (Thermocol) materials with Cyclohexane as per clause No. 28 of Technical Specifications of the tender.
Cutting of wild grass/vegetations and shifting to dumping area as directed by the Engineer-In-Charge and as per clause No. 29 of Technical Specifications of the tender.
Supply, installation, testing & commissioning of portable/handheld ultrasonic clamp-on flowmeter for flow measurement of liquids as per Clause No. 30 of Technical Specifications of the tender.
Supply, installation, testing & commissioning of the following size MS ERW Class 'C' chilled water pipe complete with closed rubber cell insulation and aluminium cladding as per clause No.31 of Technical Specifications of the tender.
150 mm dia.
100 mm dia.
80 mm dia.
50 mm dia.
Yogiraj Powertech Pvt Ltd. (BID ID -3096681)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.40 MB
Tendernotice_2.pdf
PDF • 0.41 MB
Tendernotice_3.pdf
PDF • 0.19 MB
Tendernotice_4.pdf
PDF • 0.54 MB
Tendernotice_5.pdf
PDF • 0.19 MB
Tendernotice_6.pdf
PDF • 1.67 MB
Tendernotice_7.pdf
PDF • 0.27 MB
Tendernotice_8.pdf
PDF • 0.04 MB
Tendernotice_9.pdf
PDF • 0.11 MB
Tendernotice_10.pdf
PDF • 0.14 MB
Tendernotice_11.pdf
PDF • 0.10 MB
Tendernotice_12.pdf
PDF • 0.14 MB
BOQ_867491.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .