Laying RCC NP2 pipe line to fill up Pundrak Tirth, Pundri with Fresh water from Pundri Minor at RD. 48500 and Construction of Pump House at Pundrak Tirth

Amount

Earth work in excavation in foundations, trenches, etc., in all kind of soils, not exceeding 2 metres depth including dressing of bottom and side of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonr, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. HSR item No. 6.6.

Earth work for excavation for pipe lines running under pressure in trenches and pits, in open area, where disposal of surplus earth is done alongwith the alignment icluding trimming & dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc. refilling consolidation and watering of refill, in 15 cm layer and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water diversion of traffice, night signals, fixing caution boards, watching, fencing etc. and outside the town in ordinary soil without timbering and shoring upto 1.5 mtr. depath HSR item No.6.8 (a)

Design Mix cement conc. M-15 with minimum cement contents 240Kg./cum in foundation & plinth. HSR item No.10.64

First class brick work laid in cement sand mortar 1:3 in foundation and plinth. HSR item No.11.5

Pre cast cement concrete 1:2:4 with stone aggregate 20mm nominal size in tiles & channels like items finished with smooth with 6mm thick cement plaster 1:3 on exposed surface including form work placing & fixing. HSR item No. 10.78.

12mm thick Cement plaster 1:3 on wall HSR Item No. 15.

Earth work excavation in ordinary soil dully dressed with lead 30 mtr. HSR Item No. 6.2(b) (c) (i) & 6.3 (i)

Fe-500 EQR TMT steel bars for RCC, works, where not including in the complete rate of RCC including bending, binding and placing in position complete. HSR item No.18.22

Providing, lowering cutting, jointing and testing RCC pipe class NP2 350mm dia pipe as per IS 458-2003 with spigot and Socketed joints manufactured with ISI marked sulphate Resistance Cement as per ISI 12330 with rubber rings ISI marked, antitermite as required at site, into trenches, for all depths and laying out the same to correct alignment, gradients and levels including dressing and trimming and cutting of concrete beds and sides of trenches, if required, jointing with rubber rings in trenches and jointing with 1:1 1/2 cement sand mortar and with end dowels filled with 1:1 1/2 cement sand mortar and finishing the joints at an angle of 45 degree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in HSR item No.29.38, 29.44, 29.45 & 29.46 including cartage, loading and unloading complete in all respect. HSR item No.28.60.

Providing, lowering cutting, jointing and testing RCC pipe class NP3 350mm dia pipe as per IS 458-2003 with spigot and Socketed joints manufactured with ISI marked sulphate Resistance Cement as per ISI 12330 with rubber rings ISI marked, antitermite as required at site, into trenches, for all depths and laying out the same to correct alignment, gradients and levels including dressing and trimming and cutting of concrete beds and sides of trenches, if required, jointing with rubber rings in trenches and jointing with 1:1 1/2 cement sand mortar and with end dowels filled with 1:1 1/2 cement sand mortar and finishing the joints at an angle of 45 degree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in HSR item No.29.38, 29.44, 29.45 & 29.46 including cartage, loading and unloading complete in all respect. HSR item No.29.96

Centering and shuttering for flat surface root. HSR item No. 9.1 (a)

Applying 1mm thick of cement rendering on plaster in houdi HSR item No.15.75

Centering & shuttering for sides. HSR item No. 9.7.

CC 1:3:6 with stone aggregate 20mm size in foundation & plinth (HSR 10.40)

CC 1:4:8 with stone aggregate 20mm size in foundation & plinth (HSR 10.37)

1st class brick work in CM 1:3 in super structure (HSR 11.10)

RCC 1:1.5:3 with stone agg.20mm size for slab of roof (HSR 10.82 + 10.95)

Tile treacing on roof with one layer of tile laid dry over a layer of mud mortar i/c grouting with cement sand mortar (HSR 13.14)

Conglomerate floor 40mm thick CC 1:2:4, 100mm thick CC 1:8:16 & 100mm thick sand filling. (HSR 14.12)

Providing & fixing chowkhat for door & windows of commercial hard wood such as hollock, champ etc. (HSR17.12)

Providing & fixing kail wood door & window shutter parmolled/glazed 35mm thick (HSR 17.25) (b).

Providing & fixing G.I. shutter 0.80mm thick with 40x40x6mm angle iron frame with diagonal bricks etc. (HSR 18.16)

Damp roof course 40mm thick CC 1:2:4 (HSR 10.114)

Cement pointing 1:2 deep variety on walls (HSR 15.60)

PVC insulated copper conductor wiring 1.6mm thick conduct pipe. (HSR 31.36) Fan Point meduim

PVC insulated copper conductor wiring 1.6mm thick conduct pipe. (HSR 31.36) Light point long

PVC insulated copper conductor wiring 1.6mm thick conduct pipe. (HSR 31.36) 3 Pin 5 Amp plug short

PVC insulated copper conductor wiring 1.6mm thick conduct pipe. (HSR 31.36) 3 Pin 15 Amp plug long

Preparation of plaster surface for dry distemper (HSR 16.51)

Distemper with dry distemper 2 coat on new work (HSR 16.54)

Providing and fixing girders (HSR 18.1 (a))

Cost of alluminium fittings complete in all respect for door & windows HSR 17.72 (b)

Appliying pink primer on new wood work (HSR 16.2)

Painting two coat with ready mixed paint on new wood work (HSR 16.4)

Planking of commercial hard wood 50MM such as hollock, champ etc. HSR 17.16 (b)

Finishing wall with exterior decorative covert based paint such as snowcem on new work two coats. (HSR16.61)

Earth work excavation in filling under floor including ramming of earth. HSR 6.13

Dry brick on edge paving sand grounted over 50mm thick earth and mud paster. HSR 14.20

Rain water pipe 100mm dia bore PVC pipe fixed with clamps screw HSR Item No. 13.89

Supply and fixing service cable 2 core aluminum 10mm size

Supply and fixing alluminium sliding door bolt 300mm long HSR 17.83 (b) (i)

vijay kansal contractor

MANJEET SINGH MOR CONTRACTOR