Providing functional household tap connection FHTC to village Kandela Gushali II Bakora Dogri in GP Dhagoli Tehsil Chirgaon Distt Shimla HP

Amount

Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pickwork jumper work blasting soft and hard rock and through conglomerate rock upto all leads and lifts stacking the excavated soil not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and as directed by the Engineer in-charge.

Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm( Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer in Charge

Providing form work with steel plates 3.15mm thick so as to give fair finish I/c centering shuttering propping etc. height of propping below supporting floor to ceiling not exceeding 4mt. Height & removal of same in situ reinforce ment concrete and plain concrete work in :-

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads and lifts as per the direction of the Engineer - in - Charge.

Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness.

Edge of slab and break in floor 20 cm wide

Providing and laying cement concrete work 1:1.5:3 (1cement :1.5 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcment for reinforcement concrete work in :-

i) Foundation and plinth (bed) with in all leads and lifts as per the direction of the Engineer - in - Charge.

ii) Wall (any thickness but not less than 0.1 m thickness) attached pilasters,buttresses, plinth and string courses etc. from top of foundation level up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.

Providing mild steel/tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.

Providing & laying CC 1:2:4 1cement:2 sand 4 graded aggregates 20mm nominal size curing complete excluding cost of form work & reinforcement for RCC work in:- with in all leads and lifts as per the direction of the Engineer in charge.

In suspended floor roofs landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level

Providing and laying (pours) No fine concrete 1:4 (1Cement : 4 graded stone Agg. 40mm and above and curing complete with weep hole or pours etc. with in all leads and lifts as per the direction of the Engineer in Charge.

R/R masonary/polygone rubble masonry (uncoursed/brought to course) with hard stone of approved quality in foundation & plinth including levelling up with cement concrete 1:6:12 (1cement:6sand:12aggrigate 20mm nominal size)at plinth level in CM 1:6 (1cemen

C/O Dry rubble masonry in breast wall and retaining walls revetment walls and parapets etc. with in all leads and lifts as per the directions of the Engineer in charge.

Providing and placing horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer Incharge with in all leads and lifts.

Bottom layer broken stone 50mm to 75mm

10 mm thick cement plaster on fair sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in CM 1:3 (1cement:3sand) with in all leads and lifts as per the direction of Engineer - In- Charge.

Providing and fixing Man Hole cover with frame & stair case of M.S. sheet and angle size 450x450mm(weight of Main-Hole & stair case arenot less 35kg & 75 kg). Including welding and cutting charges as per direction of Engineer in Charge.

Providing and fixing Man Hole cover with frame & stair case of M.S. sheet and angle size 450x450mm(weight of Main-Hole & stair case arenot less 35kg & 75 kg). Including welding and cutting charges as per direction of Engineer in Charge.

Providing and fixing G.M.S tubes for ventilation pipe / over flow pipe (25 to 32mm) including all fittings as per site requirment as per direction of Engineer in Charge.

Prov. and fixing GMS tubes of following dia in walls, floors etc. including tube fittings and making the wall, floors etc. good. i.e welding with one feets 25mm flat iran both side of pipes subject to site condition and as per direction of Engineer In Charge

25mm to 32mm

P/F Controlling arrangement i:e wheel valve of size 25mm to 40mm of suitable make complete as per satisfaction / direction of Engieer in Charge.

Laying, jointing, testing and commissioning in trenches galvanised mild steel tube of following dia (medium grade) including providing and fixing tube fittings such as reducer increasers, sockets, union,tees,bends etc. where ever required ( earth work in trenches to be measured and paid for separately) and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

15mm dia

20mm dia

25mm dia

Providing and installation of house connection with 15mm dia GI Pipe inclusive of laying , jointing and testing in trenches , screwed socketed and all kind of tube fitting such as GI Elbow,tee, socket,Union, Brass Tap,nipple,collers,air valve and 6mm ferrule connection complete in all respect as per direction and satisfaction of Engineer in Charge.

sanjeev kumar

Anil kumar

DILA RAM

ZAFIR HUSSAIND

Shiwang Shukla

Babu Ram