REPAIR/ REPLACEMENT OF INTERNAL ELECTRIC WIRING, LIGHT FITTINGS AND FIXTURES IN OTM ACCN/MESS IN DOMESTIC AREA, REPAIR/MAINTENANCE OF GEYSERS, CEILING FANS, EXHAUST FANS, AND WALL MOUNTED FAN INCLUDING CONNECTING WIRING IN TECH AND DOMESTIC AREA AND

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down old unserviceable switch, socket, ceiling rose, regulators, call bell and switch sockets combination etc. without point wiring

Taking down the unserviceable MCB DBs & metal clad sockets of any capacity/any type.

Taking down the unserviceable MCB of any rating and any size/type.

Taking down old unsreviceable sub main wiring of any size.

M&L for point wiring complete with 1.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including non metallic rigid PVC white conduit not less than 20mm dia and conduit accessories concealed/fixed to wall/floors/ceiling etc and provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor,1.5 sqmm for earth continuity conductor and connected to common earth dolly including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlests, fan regulators including fixing PVC round block 8 cm dia and 4 cm in depth etc., for the following: -

One light point controlled by one 5 Amps switch

One ceiling fan/exhaust fan controlled by one 5 Amps switch

One socket 5 Amp on independent board.

One socket 5 Amp on same board with other switches

One bell/buzzer point controlled by one push button on the same board with other switches or independent

All as per item No 6 above but wiring with 2.5 sq mm FRLS copper cable including earth continuty conductor with 2.5 sq mm FRLS copper cable for one 6 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch.

Point wiring with 1.5 Sqmm (nominal cross sectional area ) , single core, PVC insulated with multistranded PVC unsheathed copper conductor FRLS cable in and including PVC casing - caping of suitable size medium grade ISI marked complete and sunk CI/pressed steel terminal switch boxes flush mounting type with new hylam sheet (white) top cover, including earth wire continuity of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for the following:-

One light point controlled by one 5 Amps switch

One ceiling fan/exhaust fan controlled by one 5 Amps switch

One 3 pin socket outlet, 5 Amps on the same board with other switches

One 3 pin socket outlet, 5 Amps, independent

One bell/ buzzer point controlled by one push button on the same board with other switches or independent

All as per item No. 8 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuty cable for 6 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch.

Supply and fix in repair switch piano 5 Amps flush type one way.

Suply and fix in repair Bell Push flush type.

Supply and fix in repair socket outlet 5 pin 5 Amps multi pin flush type

Supply and fix in repair switch socket combination 5 pin 5 Amps with box, multi pin flush type.

Supply and fix in repair switch socket combination 5/15 Amps with box, multi pin flush type.

S&F in repair ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete.

Supply and fix in repair Bell ding dong AC 230 V complete.

Supply and fix in repair Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete.

Supply and fix in repair Modular Bell push 6A 1 module type, 230 volts, ISI marked complete.

Supply and fix in repair modular type Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix in repair modular type Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix in repair Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed.

S & F in repair Modular type stepped type electronic fan regulator 2 Module 230 Volts complete all as specified and as directed.

Supply and fix in repair fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed by Engr-in-Charge..

Supply and fix in repair LED lights fitting 20 Watt, 220V, 4 feet long, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED, Tube light fitting 12 Watt, 2 feet long, 6500K self blasted LED batten, extruded thermoplastic body with PC diffuser in square shape CRI>80, beam angle 120 degree, surface mounted high and two round block for mounting tubelight fittings all as specified and directed by Engr-in-Charge. Make Polycab Cat No: LD00103028 or Equivalent in Wipro/Philips/Ledvance/ Havells/CG.

Supply and fix in repair LED light fitting (mirror light) with high out put diffuser, 2 feet long, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size and two round block for mounting tubelight fittings including dismantling old unsv fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED luminaire 600mmx600 mm, 36 watt, 220 V AC recessed/surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair round shape 12 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge..

Supply and fix in repair round shape 15/18 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S & F fix in repair LED light fitting 10 Watt Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair building security light LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair building security light LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair post top lantern LED type 20 Watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge.

M&L for sub-main wiring with two runs of 4 sqmm unsheathed PVC insulated, single core heavy duty ISI Marked FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including not less than 25mm dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with 4 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed by Engr-in-Charge. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. Three run of 4 Sq mm and PVC conduct is measured as one Run or one Meter.

All as per item No 34 above but in PVC Casing Capping.

M&L for sub-main wiring with two runs of 6 sqmm unsheathed PVC insulated, single core heavy duty ISI Marked FRLS cable 1100 volts grade with copper conductor drawn through and including not less than 25mm dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with 6 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed by Engr-in-Charge. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. Three run of 6 Sq mm and PVC conduct is measured as one Run or one Meter.

All as per item No 36 above but in PVC Casing Capping.

M&L for sub-main wiring with four runs of 10 sqmm unsheathed PVC insulated, single core heavy duty ISI Marked FRLS cable 1100 volts grade with copper stranded conductor drawn through and including not less than 25mm dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with 10 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed by Engr-in-Charge. Note: Four runs of 10 Sqmm copper cable, one run of 10 Sqmm copper cable for earth continuity and PVC conduit will be measured as one run or one meter.

All as per item No 38 above but in PVC Casing Capping.

M&L for point wiring complete with 2 run of 4 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including non metallic rigid PVC white conduit not less than 25mm dia and conduit accessories concealed/fixed to wall/floors/ceiling etc and provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor, 4 sqmm for earth continuity conductor and connected to common earth dolly for 20 Amps metal clad socket.

Supply and fix in repair single pole and netural sheet metal encloser with a two pin and earth plug socket complete including one single pole MCB of 20 Amp, C Curve, 10 KA rupturing capacity complete all as specified and directed by Engr-in-charge.

Supply and fix in repair sheet metal enclosures for MCB distribution board 415 Volts Triple pole and neutral 4 way, Double door with 200A rated bus bar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr-in-charge. Note : MCBs will be measured and paid separately.

Supply and fix in repair sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 16 way Double door with 200A rated bus bar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr-in-charge. Note : MCBs will be measured and paid separately.

Supply and fix in repair sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 12 way Double door with 200A rated bus bar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge. Note : MCBs will be measured and paid separately.

Supply and fix in repair sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 8 way Double door with 200A rated bus bar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr-in-charge. Note : MCBs will be measured and paid separately.

Supply and fix in repair sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way, Double door with 200A rated bus bar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr-in-charge. Note : MCBs will be measured and paid separately.

Supply and fix in repair 63 Amp rating, 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 32 Amps rating, 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of Single Pole and Neutral, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 4 mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc all as specified and directed by Engr-in-Charge.

All as per item No 50 above but using galvanised iron strip 32×6mm as earthing lead

All as per item No 50 above but but using copper plate 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead

M&L for sub-main wiring with two runs of 1.5 sqmm unsheathed PVC insulated, single core heavy duty ISI Marked FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including not less than 20mm dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with 1.5 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. Three run of 2.5 Sq mm and PVC conduct is measured as one Run or one Meter.

All same as per item No 53 here-in-before but size 2.5 Sqmm.

Supply and fix in repair LED flood light 150 watts, 230 V AC outdoor type with thermal management in multiple optics, powder coated pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts including testing commissioning and fixing upto 20 Mtr hight of hanger including necessary fixing arrangement of clamps nut bolts etc complete all as directed by Eng-in-Charge.

Supply and fix in repair LED flood light 200 watts, 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lampCCT 5700K, lumen efficacy not less than 110 lumen/watts including testing commissioning and fixing upto 20 Mtr hight of hanger including necessary fixing arrangement of clamps nut bolts, chain locking etc complete all as directed by Eng-in-Charge.

All same as per item No 56 here-in-before but 250 watt.

Supply and fixing industrial LED High Bay light fitting power range of 200 Watts, powder coated PDC aluminium body & PC optical lenses, Lumen efficiency of >110lm/W, 5700K CCT, Alluminum Die cast housing, IP66 with life of 50,000hrs with Eye bolt provided for mounting purpose for fixing on wall/ceiling mount available as accessory, flexible options to meet industrial lighting needs i.e. suspended/fixed to Hanger Ceiling, cool white light colour, material made out of die cast aluminum & extruded aluminum heat sink and finish powder coated complete connecting electrically including testing commissioning and fixing upto 20 Mtr hight of hanger including necessary fixing arrangement of clamps nut bolts, chain locking etc complete all as directed by Engineer-in-charge.

Supply and fix driver suitable for 120/150 Watt LED flood light fittings and testing complete including taking down the Same all as specified and directed.

Supply and fix driver suitable for 200/250 Watt LED lood light fittings and testing complete including taking down the Same all as specified and directed.

Supply and fix LED Aviation light luminaries Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complerte all as specified and as directed. Make - Bajaj Cat Part No. 110731 BGAV 302 LED or its techno equivalent.

M&L for painting of ceiling/exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed by the Engr-in-Charge. Note : White paint to be used for ceiling fans and gray/sky blue paint to be used for exhaust fans.

Disconnecting and taking down the ceiling fan 1200/1400mm sweep carefully dismantling blades and removing fan complete, servicing by cleaning and greasing the bearing/bush and replacement of split pin, replacing unserviceable items like bearing, bushes, rubber real, condenser, flexible cable, canopy, etc., assembling, refixing after complete servicing in the original place connection and testing complete all as specified and as directed by the Engr-in-Charge. Note;- Replacement of unserviceable items will be measured and paid under relevant items.

All same as per item No 63 here-in-before but exhaust fan 280/300/450 mm sweep

All same as per item No 63 here-in-before but wall mounted fan 300/400/630 mm sweep

Supply and fix ball bearing for 1200/1400mm sweep Make :- TATA/ SKF/NBC

Supply and fix ball bearing for Exhaust fan 280/300 /450 mm sweep Make;- TATA / SKF/NBC

Supply and fix ball bearing of suitable size for wall mounted fan of 300/400/630 mm sweep Make:-SKF/TATA/NBC

Supply and fix gun metal bushes for 1200/1400mm sweep ceiling fan

Supply and fix capacity 2.5/3.5 Mfd for ceiling fan

Supply and fix of canopy for 1200/1400 mm Sweep ceiling fan

Supply and fix blades suitable for 1200/1400/1500mm sweep ceiling fan set of 3 blades.

Supply and fix blades suitable for Exhaust Fan of size 280/300/450 mm sweep

Supply and fix blades suitable for Wall mounted fan of size 300/400/630 mm sweep

Supply and replacement down rod for ceiling fan with 15mm dia GI pipe medium grade ,screwed and drilled with clamps rubber real ,nuts,bolts, and safety pin,etc including painting ,up to 3 mtrs height.

M & L for collecting the following burnt fans including blades of any make from AGE E/M store yard/ site, bring to reputed work shop/in-situ, dismantling removing the burnt winding, rewinding of ceiling fan with super enameled copper conduct winding wire of same gauge, insulating, varnishing, baking, including replacing of wornout bearing/bush greasing assembling and transporting the same and fixing and testing at site all as specified and as directed by Engr-in-charge,

Ceiling fan, 1200 mm Sweep

Ceiling fan, 1400/1500 mm Sweep

Wall mounted fan 300/ 400mm sweep

Exhaust Fan of size 280/300 mm sweep

Exhaust Fan of size 450mm sweep

Taking down opening and inspection of storage type water heater of size 25/50ltrs capacity and discaling with dilute hydrochloric acid, checking for water tightness of the inner tank, cable continuity, thermostat most of setting at 70 degree C checking fusible plug, stop cock including replacement of indicator lamp, rubber PVC gasket washers reassembling and refixing at old place and replacing unserviceable bolts and nuts, cementing work including hydraulic pressure testing with hard operated hydraulic pump complete after repair including spray painting of one coat with DUCO paint of approved in after preparation of surface. Note : (a) Replacement of unserviceable items like heating element, Indicator lamps, thermostat, stop cock, 3 core copper cable will be measured & paid separately as supplied only. (b) Repalcement of Glass wool is included in the unit rate. (c) Replacement of Hot cold pipe is included in the unit rate.

Supply only heating element including rubber/PVC gasket of the following all as directed including rubber washer 1.5KW / 2 KW any type

M&L for opening, removal, testing and repalcement and calibration of thermostat of the geyser including rubber gasket and setting temperature between 70 degree C to 80 degree C for capacity of 25/50 Ltrs.

Checking thermostat calibration only of the geyser 25/50 ltrs capacity and setting temperature between 60 degree to 70 degree complete all as directed.

Material and Labour for disconnecting from Electric and water mains and dismantling the unserviceable gyeser base assembly and replacing the new base assembly with rubber gasket for 25 Ltrs capacity of any make and refixing in original place including recoonecting of electric and water supply mains including testing complete all as speicifed and directed by Engr-in-charge.

All same as per item No 81 here-in-before but 50 Ltrs capacity

Material and Labour for Brazing of Storage Type water heater (Geyser) to stop leakage and testing of any capacity and make after completion upto the satisfaction of concerned JE/ Engr-in-Charge. Note :- Disconnecting and reconnecting of geyser (water and elctric ) is included in unit rate.

Supply only Non Return Valve suitable for Water Heater (Geyser) 25/50 Ltrs capacity of existing type and make complete all as specified and directed by Engr-in-charge.

Supply only copper tank for 25 Ltrs capacity of existing type complete all as specified and directed by Engr-in-charge.

All same as per item No 85 here-in-before but capacity 50 Ltrs

Supply only PVC connections 15 mm size with PTMT nuts of length 450 mm length (for hot and cold water inlet and outlet) complete all as specified and directed by Engr-In-charge.

All same as per item No 87 here-in-before but 0.9/1m length.

Supply and fix in repair electronic meters temper proof, LCD display with polycarbonate cover single phase, 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH. NOTE:- old/unservicable energy meters will be deposited to E/M store.

All same as per item No 89 here-in-before but 3 Phase, 415 volt

M & L for glass wool packing required quantity for covering the 25 ltrs copper shell to avoid the heat conduction .

M & L for glass wool packing required quantity for covering the 50 ltrs copper shell to avoid the heat conduction .

Supply and fix metal louvers of suitable size for exhaust fan of the following sweep

450 mm sweep

300 mm sweep

230 mm sweep

Supply and fix in repair exhaust fan 300mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair exhaust fan 250mm sweep made, of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as specified and directed by Engr-in-Charge.

M/s BHOOMI ELECTRICALS

chowdeshwariconstructionco

SREE VARU ELECTRICALS

RRK PROJECTS

M/S SRI BALAJI ENTERPRISES

Gee Kay Projects