Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹15.4 L+₹83,867.08 (5.77%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹14.4 L
EMD Value
₹28,900
Closing Date
20 Nov 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
JSV Division Jubbal
Construction of Pump House
2023_HPIPH_81237_3
JBL-SML-09-718
Open Tender
Civil Works
Item Rate
365 days
Jubbal
Please refer Tender documents.
8 documents required · 8 mandatory
₹400
₹28,900
Yes
26 Feb 2024
7 Nov 2023
20 Nov 2023
7 Nov 2023
20 Nov 2023
7 Nov 2023
Amount
Cutting in earth work and disposal of excavated earth up to a lead of 20 mtr. With in all leads and lifts as per the direction of the Engineer- in- charge.
Excavation in foundation,trenches (trenches for laying of pipes and man hole chambers) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/strutting, planking,timbering & dewatering wherever required, stacking the usable & unusable material/soil separaterly & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 Cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer - in - charge.
Providing & Laying cement concrete 1:6:12(1ccement :6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts as per the directions of the Engineer in charge.
Providing and laying cement concrete work 1:1.5:3 (1cement :1.5 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcment for reinforcement concrete work in
Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge.
Column.pillar & post upto floor two level
Brick work using common burnt clay building bricks in foundation and plinth in :- Cement Mortar 1:6 (1:cement:6 Sand) 2nd class bricks with in all leads and lifts as per the directions of the Engineer in charge.
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position of 1st class deodar wood. with in all leads & lifts as per directions of Engineer - in - charge.
Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: 2nd class deodar wood.
P/F wire gause shutters using MS wire gause of IS gause designation 85 G for doors windows clerestorey windows I/c bright finished black enamelled iron hinges with necessary secrews 40 mm thick 2nd class deodar wood.
Providing from work of steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooden battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for insitu reinforced concrete and plain concrete work with in all leads and lifts as per the direction of the Engineer-in-charge.
Flat surfaces such as soffits and suspended floors, roofs landing and the like: Floors etc up to 200 mm in thickness .
Beams, cantilever Girders& lintals sides&soffits of beams, beams,haunching cantilever girders not exceeding 1mtr. Depth.
Edges of slab and breaks in floors and walls under 20cm. Wide with in all leads and lifts as per the direction of the Engineer - in - Charge.
Foundation footing bases of columns & mass concrete.
Column.pillar & post upto floor two level square, rectangular& polygonal in plan.
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like.
Providing and laying cement concrete 1:2:4 (1cement :2 Sand: 4 graded stone aggregate 20 mm (Twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.
Providing and laying cement concrete work 1:1.5:3 (1cement :1.5 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcment for reinforcement concrete work in Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.
Kota stone slab flooring on 20 mm (average) thick base of lime mortor 1:4 (1 Cement 4 sand)laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
20 mm thick cement plaster on rough sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:6 (1cement:6sand) with in all leads and lifts as directed by the Engineer-in-Charge.
Pointing on brick work cement mortar 1:3 (1 cement: 3 Mortat) Rulled pointing with in all leads and lifts.
6 mm thick cement plaster in CM 1:3( 1cement 3 sand) in roof slabs with in all leads and lifts as directed by the Engineer-in-Charge.
Providing plinth protection 50mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone agg. 20mm nominal size) i/c finishing the top surface of concrete smooth within all leads and lifts and as directed by the Engineer-in-charge.
Providing under layers for plinth protection of 75 mm thick ( unconsolidated) bed dry brick/stone aggregated 40 mm nominal size will rammed 7 consolidated & grouted with fine sand including preparation of gruond within all leads and lifts and as directed by the Engineer-in-charge.
Providing Tor steel reinforcement for RCC work including bending,binding & placing in position complete upto floor two level within all leads and lifts and as directed by the Engineer-in-charge.
Applying two coat of wood preservative on new wood based surface after and including preparing the surface by thoroughly cleaning dirt dust and other foreign matter within all leads and lifts and as directed by the Engineer-in-charge.
Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts.
Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts.
Distempering (two coat) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth .Priming coat with distemper primer within all leads and lifts and as directed by the Engineer-in-charge.
Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials within all leads and lifts and as directed by the Engineer-in-charge.
Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete within all leads and lifts and as directed by the Engineer-in-charge.
Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size within all leads and lifts and as directed by the Engineer-in-charge.
Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete
Sliding door bolts 200x16mm.
M.S. tower bolts (Barrel type) leads and lifts. 200x10mm.
M.S. tower bolts (Barrel type) leads and lifts. 150x10mm.
M.S. tower bolts (Barrel type) leads and lifts. 100x10mm.
M.S. handles 125mm dia
M.S. handles 100mm dia
Providing and fixing of MS round bars (16 mm) in windows and ventilators within all leads and lifts and as directed by the Engineer-in-charge.
Stone/Boulder filling under floors/behind retaining walls within all leads and lifts and as directed by the Engineer-in-charge.
Filling in plinth with sand under floors including watering,ramming,consolidating and dressing complete.
Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in R.S. Joists,channels, angles, tees etc. with in all leads and lifts as directed by the Engineer Incharge
Providing corrugated G.I. sheet roofing fixed with galvanised iron J or L hooks bolts and nuts 8mm dia meter with bitumen and G.I. limpet washer filled with white lead complete excluding the cost of purlins refters and trusses. ( 0.63 mm thick sheet.) with in all leads and lifts as per the direction of the Engineer in charge.
Providing ridge or hips 60 cm over in plain galvanised iron G.I Sheet fixed with iron J.or L. hooks bolts and bolts & nuts 8mm diameter with bitumen and G.I. Limpet washers complete with in all leads and lifts as per the direction of the Engineer in charge.
Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work to be measured and pais separetly) with in all leads and lifts as per the direction of the Engineer in charge.
Providing & Fixingasbestos cement sheet in ceiling approved quality with butt jointing & wood screw ( frame work and cover fillits to be measured sepretaly. ( 6mm thick)
Half brick masonry in common burnt clay building bricks in :- Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.
Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm( Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-In-Charge.
Providing and laying cement concrete 1:1:2 (1cement :1Sand: 2 graded stone aggregate 20 mm N/S) and curing complete excluding cost of form work and reinforcement for Rainforced concrete work in:-
Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge.
Walls (Any thickness) attached pillasters, pillasters, buttresses, beam girder and contilevers upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.
Providing and fixing MS Sheet Man hole cover with locking arrangement including lock, nuts & bolts & other fittings complete with in all leads & lifts as per the entire satisfaction & direction of the Engineer Incharge.
Wiring for light point/fan point/exhaust fan/call bell point with 1.5 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. with in all leads and lifts as per direction of the Engineer-in-Charge. i) Group A.
Wiring for power plug with 2x4 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke sinlge core (flexible) copper conductor cable in PVC casing & capping along with 1 No. 4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.with in all leads and lifts as per direction of the Engineer-in-Charge. Group A.
Wiring for power plug with 4x4 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke sinlge core (flexible) copper conductor cable in PVC casing & capping along with 2 No. 4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.with in all leads and lifts as per direction of the Engineer-in-Charge. Group A.
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke sinlge core (flexible) copper conductor cable in PVC casing & capping along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. with in all leads and lifts as per direction of the Engineer-in-Charge.
2x1.5 Sq.mm.
Supplying & Fixing metal boxes of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.
180mm.x100mm.x60mm. Deep.
Supplying and fixing following rating Piano-type switch/socket on the existing switch box/cover including connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.
S.P. 5/6 Amps one way switch, piano type.
5 pn 5/6 Amps socket outlet, poreclain base/piano type.
Supplying and fixing bakelite batten/angle holder including connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.
Supplying and erection of 6 amps, to 32 amps, rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge. Single pole . Cat-A
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge. 63 Amps. Cat- A
Supplying and fixing of following way, single pole and netural sheet steel MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels inter-connections phosphatized and powder painted, including earthing etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.
Double door -6way
Supplying and laying SWG 8 copper wire at 0.50 mtr below ground level for earth electod conductor including soldering etc. as required complete in all respect as per stifactory as per Engineer-in-charge.
Supplying and errection of Fluoresent Tube (T8) Suitable for steek strip type testing of Bajaj Make Complete as required complete in all respect as per satisfaction of the Engineer-in-Charge.
Providing and fixing viterious China wash down water closet (European type. W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement: 1 Sand) (Seat and cover to be measured and paid separately) Ordinary Type with in all leads and lifts.
Providing and fixing seat and cover for wash down water closet with C.P brass hinges and rubber buffer solid type white plastic seat and cover with in all leads and lifts.
Providing and fixing of connection pipe with brass union 45 cm long 15 mm dia with in all leads and lifts.
Providing and fixing of water tank of ISI 12701 marked inlet and outlet connections with15 mm dia blaa valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all heights above ground level of 1000 ltrs capacity with in all leads and lifts.
P/F C.P. Brass Bib tap with capstan head(15mm dia) with in all leads and lifts as per the directions of the Engineer in charge.
Providing & fixing of Brass full way wheel valve of 15mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.
Providing and fixing viterious China wash down water closet (European type. W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement: 1 Sand) (Seat and cover to be measured and paid separately) Ordinary Type.
Prorviding and fixing vitreous china wash basin with single hole for piller tap with C.I. or M.S. brackets painted white Flat back 550mmx400mm within all leads and lifts and as directed by the Engineer-in-charge.including cutting holes and making good the same but excluding fittings:-with in all leads and lifts as per the directions of the Engineer in charge.
Providing and fixing PTMT Coloured / white high density polyethlylene / poly propylene 10 liters cap. full flush European standard control low level flushing Cistern with fitting and within all leads and lifts.
Providing and fixing of C.P brass waste for wash basin or sin 32 mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.
P/F Chromimium plated brass. soap dish with C.P. brass brackets fixed to wooden cleats With C.P. brass screws with in all leads and lifts as per the directions of the Engineer in charge.
P/F C.P. Brass Bib tap with capstan head(15mm dia) with in all leads and lifts as per the directions of the Engineer in charge.
Providing & fixing of Brass full way wheel valve of 15mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.
Providing & fixing of CP angle cock of 15mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.
Providing & Fixing of GI-union 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.
Providing & Fixing of GI-Elbow 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.
Providing & Fixing of GI-Tee 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.
Providing & Fixing of GI-Nipple 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Light grade)tube fittings and clamps including making good the wall ceiling and floor 15mm nominal bore. including carriage of material within all leads and lifts and as per direction of Engineer-in-charge.
Providing & Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheet or ply wood sheet & fixed to wooden plug with CP-brass screw & washers.
Providing and fixing in trenches 10 Kg.f/cum2 working pressure unplasticized P.V.C. pipe (Conforming to IS: 4985-1968) complete fittings (earth work in trenches to be measured and paid for separately):-
110 mm out side diameter.
Elbow 100 mm dia.
Clamp 100 mm dia.
Door Bends
Plain bends
Collar
Floor Traps
MR. BALVIR SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .