POLISHING PAINTING TO CERTAIN WOODEN AND STEEL FURNITURE AT BSO YARD UNDER GE MH AND RH KIRKEE

Amount

M&L for preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and applying two coats of synthetic enamel (1st quality paint) shade shall be as approved by GE complete all as specified & directed.

Almirah Large steel Drg No : FD-67/ FD-1031

Almirah Large steel (1/2Hx1/2S) Drg No : FD/E6/MAP/18

Almirah medium steel Drg No : FD-243/FD-1032/FD-1034

Table office officers steel Drg No FD-84/FD-1002/FD-1003

Table dining OR's Drg No : FD-165

Table office clerk steel Drg No : FD-84/FD-1004

Table bed side steel Drg No : FD-157

Chair easy steel Drg No : FD-121

Stool steel Drg No : FD-103(M) /FD-81

Table steel 900 x 900 x 760 mm Drg No : FD-1009

Table steel w/drawer 900 x 600 x 760 mm Drg No : FD-223

Teapoy varandha Drg No : FD-255/208/MAP

Locker bed side steel Drg No : FD-1029

Chair CBA Steel with arms and cushion Drg No : TP

Rack adjustable steel 3 tier Drg No : FD-1039

Rack adjustable steel 6 tier Drg No : FD-345/FD-1038

Rack side 3/4 spaces Drg No : FD-1023

Form With Back Drg No : FD-78 (M)

Form Without Back Drg No : FD-77(M)/FD-1027

Trestle store room steel Drg No : FD-347/FD-1043

Bed Hard Steel Drg No : FD/MAP-II/08(R)

Charpoy with Hard Top Drg No : FD/MAP-II/01

Charpoy GI Pipe Drg No : FD 220

M&L for preparing old existing surfaces of wooden furniture of any description by scraping machine and sand paper, removing the stains and filling holes, cracks by putting bees wax and chalk powder etc., and applying polish one or more coats to the exposed surface (shade as approved by GE/Engr-in-Charge). Polishing shall be done uniformly to a glossy finish for the following articles:-

Bed ply top Drg No : FD-246

Book case small Drg No : FD-237/FD-45(M)

Chair Dining Drg No : FD-16/FD-279/FD-228

Chair easy Drg No : FD-229

Chair Writing Drg No : FD-280

Chair Dining Drg No : FD/MAP-II/04

Chair Dining JCOs/ORs Drg No : FD/MAP-II/05

Side board Drg No : FD-241

Table centre Drg No : FD-274/FD-235

Table dining 6/8 pers Drg No : FD-30 (M) /FD-239

Table bed side Drg No : FD-276/FD-248

Teapoy Drg No : FD-278/FD-232

Table 3'x2' without drawer/withdrawer Drg No : FD-284/FD-283

Peg table Drg No : FD-277/FD-236

Stool Dressing Drg No : FD-252/FD-282/FD-374

Table Dressing Gents Drg No : FD-230,31(M)

Table office clk (w) Drg No DB-4120

Table office officer (w) Drg No : DB-4119

Hat stand Drg No : FD-233/FD-206/FD-362

Table dressing ladies Drg No : FD-251, FD-32/Drg No : FD/MAP-II/07

Table writing Drg No : FD-275/FD-249

Sofa Chair Drg No : FD-258/FD-281

Sofa set 3 seater Drg No : FD-258/FD-281

Bin soiled linen Drg No : FD-244/FD-212

Table 1200 x 900 Drg No : FD-271

Table 5x2x10" Drg No : FD-139(M)

Chair Easy Cushioned Drg No : FD-358

Bin Linen Multipurpose Drg No : FD/E6/MAP/09

Taking down carefully / removing following unserviceable component / member of SOFA SET 5 SEATER / 4 SEATER and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge Drg No : FD-281/ FD-373/ FD-258

Replacement of existing tapestry and cushions of sofa set by replacing old unserviceable cushion with 40 density U-foam cushion (size as per drg) including providing long cloth lining for cushion, covered with tapestry cloth of first quality (as per sample available at BSO yard) and rate not less than ₹750/- per RM) of approved shade duly stiched in shape and provided with good quality nylon zip on one side for sofa set 5 seater for Set of 10 cushions.

Front or rear leg

Batten of seat & back

Side Rail

Long rail (front or rear) of sofa single seater

Long rail (front or rear) of sofa 3 seater

PVC/hard rubber shoe

REPAIRS TO CHAIR VERANDAH: DRG NO : FD-359 Note for item Nos 4.01 to 4.04 :- (i) Old damaged canning shall be removed before painting. (ii) Colours of cane and paint shall be as approved by GE.

Taking down old existing unserviceable cane from chair verandah and Material and Labour for preparation of existing painted surfaces of steel frame of chair verandah by hand scrapping, cleaning of the surfaces and applying two coats of synthetic enamel paint including preparation of surface complete all as directed.

M&L for reweaving the same with new 4mm wide plastic cane oval type best quality, in seat and back, complete all as shown on drawing and as directed by Engr-in-Charge.

Material and Labour for welding before painting as required broken portion of Chair. In repairs exc 2.5 but not exc 5cm length and thickness of metal to be welded not exc 6mm

PVC/hard rubber shoe

M/s SK Construction

M/s Green Leaf Electricals