Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹49.8 L+₹4.8 L (10.6%)Rejected-AOC VILL SANDIPUR PO DWARNARY DISTT PURBA MEDINIPUR KOLKATA 7134403 WB | KOLKATA | PURBA MEDINIPUR | WB | 7134403 | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹52.0 L+₹7.0 L (15.6%)Rejected-AOC VILL SAROT PALLY PO SANKRAIL DIST HOWRAH PIN 711313 WB | SANKRAIL | HOWRAH | WEST BENGAL | 711313 | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹52.3 L+₹7.3 L (16.2%)Rejected-AOC J L BHAWAN MANKAR ROAD BUD BUD BAZAR PO BUD BUD DISTT BURDWAN WB | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹52.3 L+₹7.3 L (16.3%)Rejected-AOC | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹49.8 L
EMD Value
₹99,600
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_553205_1
8400-861/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹99,600
Yes
9 Dec 2022
20 Sept 2022
15 Oct 2022
20 Sept 2022
13 Oct 2022
6 Oct 2022
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc.or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
All as per item No 2.00 mentioned here-in-above but exc 1.5 m depth beyond the first 1.5 m complete all as specified and directed
Moorum/red bajri filling in floors or in foundation, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed
M&L for hardcore of broken stone of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete, Design Mix, (M-25) (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L for Reinforced Cement Concrete, Design Mix, (M-25) (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Reinforced Cement Concrete, Design Mix, (M-25) (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for Reinforced Cement Concrete, Design Mix, (M-25) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for Reinforced Cement Concrete, Design Mix, (M-25) as in chajja complete all as specified and directed
S&F mild steel TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip complete all as specified and directed by Engineer in Charge.
All as per item No 12.00 mentioned here-in-above but 8mm dia complete all as specified and directed by Engineer in Charge
All as per item No 12.00 mentioned here-in-above 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders complete all as specified and directed
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams for rough finished surfaces etc complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (Horizontal or sloping) complete all as specified and directed
Form work to chajja and similar work including edges for rough finished surfaces complete all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed.
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.
M&L for 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .
M&L for chowkhat 2nd class hard wood and frames wrought , framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-In-Charge.
S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-In-Charge.
S&F stainless steel sliding door bolts 250mm long, plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and two on staple plate and fixed complete all as specified and directed by Engr-In-Charge .
S&F 100mm butt hinges, medium weight, stainless steel, complete all as specified and directed
S&F 200mm stainless steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.
S&F 125mm stainless steel handles, cast type, stove enameled black complete all as specified and directed
S&F 2nd class small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n.exc 200 cu cm each complete all as specified and directed by Engr-in-Charge
S&F mild steel flat iron as in hold fasts including all necessary cutting etc complete all as specified and directed.
M&L for painting on new wooden based surfaces of any description not other wise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .
M&L for 100mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base floor complete all as specified and directed
M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed base of CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick in CM (1:4) as cement screed and jointed with grey slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for 40 mm thick damp proof course in cement concrete type B-0, 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:4) using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid separately)
M&L for rendering 5mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, chajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed
M&L for preparation of new surfaces of ceiling applying three coat of white wash complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in padding on roof, finished fair and even without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick on fair faces on roof surfaces of concrete in Cement Mortar (1:4) finished even and smooth without using extra cement and WPC complete all as specified and directed.
M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and directed by the Engr-in-Charge. (Note : As per description of this item, minimum two cots of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii) Quoted rate shall be included for work in building/structure of any height. (iii) To be applied by authorized applicator).
M&L for 75mm thick Cement Concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
M&L for 100mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block with grey cement and no pigmenetany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L for plain cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in kerb, coping, bed block for fixing of hold fast etc complete all as specified and directed
M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.
M&L for brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed
Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed.
M&L rendering 15 mm thick cement plaster in CM (1:6) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC complete all as specified and directed. (Note: WPC will be measured and paid separately).
M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed for floor finishes complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
S&F bib tap fancy type long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed
S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminum alloy brackets and guard rail all completed as specified.
S&F in tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and directed.
S&F in stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed complete all as specified and directed
S&F in grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed
S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and directed.
M&L for glazed ceramic tiles 350 x 250 mm x 7mm / 450 x 350 x 7mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in CM (1:3) on brick or concrete surfaces complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm wood grain printed PVC shee twith mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed by Engr - in - Charge.
S&F anodised powder coated aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
S&F anodized aluminum window and ventilator shutters, fixed type without sash bar, aluminum section with powder coating of any colour (Thickness or powder coating not less than 50 micron) weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed
S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.
S&F vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S&F vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and directed.
S&F flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed
S& F Vitreous China bowl urinal flat back Size of 465 x 355 x 265 mm white with grating and union for discharge pipe complete all as specified and directed.
S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed
M&L for laying Reinforced concrete pipes 150 mm in dia, class NP2, laid and jointed complete with collars complete all as specified and directed.
M&L for concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for plain cement concrete type B0, 1:2:4( using 12.5mm graded stone aggregate) as in coping complete all as specified and directed
M&L for rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed or bedding layer of 15 mm thick with cement mortar (1:6) and pointed in white or coloured cement to match complete all as specified and directed.
S&F steel ventilators with centre hung shutter (minimum wt. of steel section should be 1.42 kg/M) including two pairs of brasscup pivots, catch spring and pulley wheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type complete all as specified and directed.
S&F water closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.
S&F 10Ltr PVC valve less, syphonicaction type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.
S&F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed complete all as specified and directed
S&F 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinal (Minimum weight 32mm45gms/ 40mm-60 gms complete all as specified and directed
S&F PVC flexible urinal waste pipe 1/2 inch dia fixed to urinal stall waste coupling complete all as specified and directed
S&F vitreous china urinal partition white of size 310x700 mm, slabs terminating about 40cm above floor line complete all as specified and directed.
S&F PVC connection 15 mm size PTMT nuts of length length 600 mm complete all as specified and directed
S&F soap dish vitreous china white size 160x160x90mm approx complete all as specified and directed by Engineer -in-Charge
S&F 20mm bore gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/wall or in floors complete all as specified and directed
S&F 75mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.
All as per item No 104.00 mentioned here-in-above but with access door complete all as specified and directed
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.
S&F 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.
S&F 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed by EIC
M&L for PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in padding on roof, finished fair and even without using extra cement complete all as specified and directed by EIC.
M&L for brick work with fly ash bricks straight curved on plan.exc 6 meter mean radius for manholes/septic tank/sok well etc/ in sewer works with old size bricks in cement mortar (1:4) complete all as specified and directed.
M&L for setting coat of 3mm thick of CM (1:2), trowelled to even and smooth finish over rendering 15mm thick in CM (1:4) on fair faces of brick work finished surface even & smooth with using water proofing compound @ 2% complete all as specified and directed. (Note: WPC shall be measured and paid separately)
M&L for providing RCC precast cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) as in cover slab for manhole and similar article with plain face set in cement mortar (1:4) complete all as specified and directed. (Note : Reinforcement shall be paid separately).
Supplying and laying UPVC Eco drain Hi-tech pipe drainage sewer system pipe bearing 160 mm dia minimum 4mm thick including jointing with coupler, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. (Note: Necessary PCC haunching/benching/packing shall be measured and paid separately).
M&L for providing precast cement concrete type B-0, 1:2:4 (using 12.4 mm graded stone aggregate) louvers and jallies in cement mortar (1:4), 25mm thick (measured solid), including all mouldings complete all as specified and directed.
M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for 50mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.
M&L for forming contraction (dummy) joints 50mm deep x 10mm wide, filled with sealing compound Gde 'B' complete all as specified and directed
S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge. (Make: Sintex/Vectus/Prayag)
S&F high pressure PTMT float valve with epoxy coated alluminium rod and high density polyethylene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.
M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.
S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/ Tee/ Reducer Nipple etc complete all as per specified and directed.
S&F in repair for 25mm bore GI tubing medium grade in trenches/floor/pillar connection in old or new position including fittings complete all as specified and directed. (Make: Bansal/Jindal)
All as per item No 123.00 mentioned here-in-above but 40 mm bore complete all as specified and directed
S&F in repair Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule for 25mm bore complete including taking down complete all as specified and as directed.
S&F 2000 ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge. (Make: Sintex/Vectus/Prayag)
S&F 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 50 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.
EM PORTION M&L for point wiring for light point/ fan point, one light/fan/ exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 129.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 129.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc.complete all as specified and directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed
S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed
S&F building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. (Make: Bajaj/Crompton Greaves/Philips)
S&F 18 W LED light fitting wall mounted batten 4'ft, extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 18 watt, 6000K including necessary connection complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door, single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
M&L for earthing complete with galvanized mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point, GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the earth testing register, prepared and to be maintained by the contractor & submitted to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote with suitable size 3 core round flexible copper conductor complete all as specified and directed
S&F heavy duty metal body ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with suitable size 3 core round flexible copper conductor complete all as specified and directed
S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed
S&F LED bulb 7 watts, 240 volts, ISI marked complete all as specified and directed
S&F 9W LED mirror light fitting wall mounted batten 2ft, extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 9 watt, 6000K including necessary connection complete all as specified and directed.
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2.0 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/ inside protection pipe of the following cross sectional area including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings (Note: Excavation, sand cushioning, brick will be measured and paid separately).
Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured).
Supply and laying of fly ash bricks locally available width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.
S&F surface mounted type decorative light fitting 1 x 09W LED 6k 230V AC, 50Hz complete with all accessories complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessary connection all as specified and directed.
S&F metallic ventilating exhaust fan 230 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with suitable size 3 core round flexible copper conductor of suitable size all as specified and directed.
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 4 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings (Note: Excavation, sand cushioning, brick will be measured and paid separately).
S&F pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or complete all as specified and directed.
Supply, laying / fixing / connecting, testing and commissioning of 16 Sqmm x 4 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings (Note: Excavation, sand cushioning, brick will be measured and paid separately).
UNIVERSAL TRADING
M/s Santosh Industrial Corporation
FRIENDS CONSTRUCTION
M/S Konar Engineering
NATIONAL CONSTRUCTION CO
SINGH CONSTRUCTION
M/S FM Enterprise
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .