Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹18.8 L+₹3.1 L (19.4%)Rejected-Finance 25 25 SADAR BAZAR JALANDHAR CANTT | JALANDHAR | JALANDHAR | PUNJAB | L2 | Rejected-Finance Other than lowest bids | |
| 3 | L3₹18.9 L+₹3.2 L (20.1%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bids | |
| 4 | Rejected-Technical | - | Rejected-Technical Applicant not fulfill the eligibility criteria |
Tender Value
₹21 L
EMD Value
₹42,000
Closing Date
14 Dec 2020, 6:00 pmClosed
CWE Jalandhar Cantt
HQ CWE kabir Road Jalandhar Cantt Pin-144005
Please refer tender documents
2020_MES_392307_1
CA NO. CWE/JAL/W-77/2020-21 8320/77/E8
Open Tender
Furniture/ Fixture
Item Rate
180 days
Jalandhar Cantt
Class E Category d(i) for contractors enlisted with MES
8 documents required · 8 mandatory
₹500
Garrison Engineer West JRC
₹42,000
Yes
9 Jan 2021
3 Nov 2020
16 Dec 2020
3 Nov 2020
14 Dec 2020
17 Nov 2020
Amount
Taking out existing unserviceable nylon newar from the charpoy GI pipe, tightening each part of charpoy, supply and fixing of 03 Nos flat iron of size 40mm x 4mm of length equal to width of plywood/GI Charpoy painted with two coats of synthetic enamel black paint over a coat of primer and fixing it tightly to GI Charpoy with nuts, bolts and washers of suitable size including necessary drilling into GI pipe, drilling holes 03 Nos each in long rails, 02 nos each in short rails & 02 Nos on all three flat iron at centre and supply & fixing 12mm thick BWR Grade plywood commerical of size 1980 X 900 fixed to GI pipe frame with 10 Nos GI nuts, bolts of 6mm dia, 62 to 65mm long, complete all as specified & directed. Drg : FD-220
Taking out old unserviceable long rail from three way elbow by unscrewing and replacing with new long rail of GI pipe 32 mm bore, medium grade, duly threaded both end to the required size fitted to the frame, complete all as specified as shown on drawing and as directed. Drg : FD-220
Taking out old unserviceable short rail from three way elbow by unscrewing and replacing with short rail of GI pipe made out from long rail retrieved under Serial item No. 2.0 here-in-before duly threaded both end to the required size fitted to the frame, complete all as specified as shown on drawing. Drg : FD-220
Taking out old unserviceable leg from three way elbow by unscrewing and replacing with leg of GI pipe made out short rail retrieved under Serial item No. 3.0 here-in-before duly threaded both end to the required size fitted to the frame including supply and fixing for mild steel bottom plate made out of MS sheet 3mm thick welded to bottom of leg by Gas/Arch welding all around the bottom plate with leg, complete all as specified as shown on drawing. Drg : FD-220
Taking out old unserviceable /broken GI check nut from the frame by unscewing and replacing with new check nut GI 32mm bore as per sample kept in BSOs office, complete all as specified and as shown on drawing and directed. Drg : FD-220
Taking out old unserviceable/broken three way elbow from GI pipe charpoy by unscrewing and replacing with new three way elbow GI 32mm bore/dia 'ISI marked', complete all as specified and as shown on drawing and directed. Drg : FD-220
CHOUDHARY AND SONS
M/S CHAWLA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .