Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹9.3 LAccepted-AOC FLAT NO 205 SYNERGY WORLD KOSARA DISTRICT CHANDRAPUR MS 442401 | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | 442401 | L-1 | Accepted-AOC Lowest qualified bidder. Hence being awarded | |
| 2 | L-2₹9.8 L+₹47,038.34 (5.05%)Rejected-AOC | L-2 | Rejected-AOC Not a qualified L1 bidder | |
| 3 | L-3₹9.8 L+₹47,466.68 (5.10%)Rejected-AOC MAHARANA PRATAP WARD BALLARPUR DIST CHANDRAPUR 442701 | BALLARPUR | CHANDRAPUR | MAHARASHTRA | 442701 | L-3 | Rejected-AOC Not a qualified L1 bidder | |
| 4 | L-4₹10.0 L+₹67,787.46 (7.28%)Rejected-AOC SHIVNICHOR NANDGAON PODE RAJURA DIST CHANDRAPUR 442905 | RAJURA | CHANDRAPUR | MAHARASHTRA | 442905 | L-4 | Rejected-AOC Not a qualified L1 bidder | |
| 5 | L-5₹10.9 L+₹1.6 L (16.7%)Rejected-AOC 106 APSARA APARTMENT CHAPRU NAGAR CHOWK CENTRAL AVENUE MAHARASHTRA NAGPUR 440008 | NAGPUR | MAHARASHTRA | 440008 | L-5 | Rejected-AOC Not a qualified L1 bidder |
Tender Value
₹13.3 L
EMD Value
₹16,700
Closing Date
18 Jan 2024, 3:30 pmClosed
Shri. Nitin Naik
OFFICE OF THE AREA GENERAL MANAGER WCL BALLARPUR AREA P.O. SASTI TA. RAJURA DIST. CHANDRAPUR (MS) PIN 442905
Making car parking shed and roofing pathway with profile sheet in Transit guest house at Sasti Township under Ballarpur Area
2024_WCL_297885_1
wcl-ba3650-civ-e145-23-24/843
Open Tender
Civil Works - Others
Item Rate
45 days
WCL Ballarpur Area
As per NIT
4 documents required · 4 mandatory
₹16,700
8 Apr 2024
8 Jan 2024
19 Jan 2024
8 Jan 2024
18 Jan 2024
8 Jan 2024
8 Jan 2024 - 15 Jan 2024
Amount
Earth work in excavation by mechanical means(Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Earth work in surface excavation of average 10 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in Charge:All kinds of soil
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5m. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required rubber moulded colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Clearing jungle including uprooting of rank vegetation,grass,brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Transportation of earth by mechanical transport including loading and unloading etc complete within a lead of 5 km.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
Total impact of GST for the purpose of CTC
NAGEEN SURENDERSINGH SANWAL
M/s P K CONSTRUCTION
SANTOSH BHONGARE
MANAN ENTERPRISES
Huzaifa Hasan Ali
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .